Code page 437 (CCSID 437) is the character set of the original IBM PC (personal computer).[2] It is also known as CP437, OEM-US, OEM 437,[3]PC-8,[4] or DOS Latin US.[5] The set includes all printable ASCII characters as well as some accented letters (diacritics), Greek letters, icons, and line-drawing symbols. It is sometimes referred to as the "OEM font" or "high ASCII", or as "extended ASCII"[4] (one of many mutually incompatible ASCII extensions).
This character set remains the primary set in the core of any EGA and VGA-compatible graphics card. As such, text shown when a PC reboots, before fonts can be loaded and rendered, is typically rendered using this character set.[note 1] Many file formats developed at the time of the IBM PC are based on code page 437 as well.
All these display adapters have text modes in which each character cell contains an 8-bit character code point (see details), giving 256 possible values for graphic characters. All 256 codes were assigned a graphical character in ROM, including the codes from 0 to 31 that were reserved in ASCII for non-graphical control characters.
Various Eastern European PCs used different character sets, sometimes user-selectable via jumpers or CMOS setup. These sets were designed to match 437 as much as possible, for instance sharing the code points for many of the line-drawing characters, while still allowing text in a local language to be displayed.
A legacy of code page 437 is the number combinations used in Windows Alt codes.[6][7][8] A DOS user could enter a character by holding down the Alt key and entering the character code on the numpad[6] and many users memorized the numbers needed for CP437 (or for the similar CP850). Although Microsoft Windows used different character sets such as CP1252, the original numbers were emulated so users could continue to use them; Microsoft added the ability to type a code from the Windows character set by typing 0 before the digits.[6][9]
The following tables show code page 437. Each character is shown with its equivalent Unicode code point (when it is not equal to the character's code). A tooltip, generally available only when one points to the immediate left of the character, shows the Unicode code point name and the decimal Alt code. See also the notes below, as there are multiple equivalent Unicode characters for some code points.
Although the ROM provides a graphic for all 256 different possible 8-bit codes, some APIs will not print some code points, in particular the range 0-31 and the code at 127.[10] Instead, they will interpret them as control characters. For instance, many methods of outputting text on the original IBM PC would interpret hex codes 07, 08, 0A, and 0D as BEL, BS, LF, and CR, respectively. Many printers were also unable to print these characters.
When translating to Unicode some codes do not have a unique, single Unicode equivalent; the correct choice may depend upon context.
^0 draws a blank space, but usage as the C string terminator means it is more accurately translated as NUL. In their code-page-437-based implementation of C0-region graphics, Star Micronics printers re-purpose this code as a slashed zero.[15]
^Mapping as shown, to the beamed quavers [U+266B, ♫], follows data provided by the Unicode Consortium.[16] In IBM's GCGID (Graphic Character Global IDentifier) system of character IDs, this is SM910000, simply annotated as "Two Musical Notes";[12][13] however, the reference glyph shows two beamed semiquavers [U+266C, ♬].[12] In the specification for IBM Japanese Host code, SM910080 (i.e. SM910000 with the fullwidth attribute set) is explicitly mapped to U+266C, and accordingly shows two semiquavers.[17]
^124 (7Chex) The actual glyph at this position is a broken bar [U+00A6, ¦] in the original IBM PC and compatibles font, as rendered by the original MDA. This rendering was later adopted for CGA, EGA and VGA (see image at the beginning of the article). However, almost all software assumes this code is the ASCII character [U+007C, |]; for example, programming languages use it as "or". In the early 1990s, it was clarified[by whom?] that there is vertical bar in ASCII at this position and that the broken bar symbol is not part of ASCII.
^127 (7Fhex) is a "house" but was also sometimes used as Greek capital delta [U+0394, Δ].
^Could also serve as an integral extension [U+23AE, ⎮] in IBM's font.
^Comparison of characters in the E0 to EF range across various IBM products.225 (E1hex) is identified by IBM as Latin "Sharp s Small"[13] [U+00DF, ß] but is sometimes rendered in OEM fonts as Greek small beta [U+03B2, β]. The placement of this Latin character among Greek characters suggests intended multi-use.
^227 (E3hex) is identified by IBM as Greek "Pi Small" [U+03C0, π] but is sometimes rendered in OEM fonts as Greek capital pi [U+03A0, Π] or the n-aryproduct sign [U+220F, ∏].
^228 (E4hex) is identified by IBM as Greek "Sigma Capital" [U+03A3, Σ] but is also used as the n-arysummation sign [U+2211, ∑].
^230 (E6hex) is identified by IBM as Greek "Mu Small" [U+03BC, μ] but is also used as the micro sign [U+00B5, µ]. IBM's Greek GCGID table[18] maps the character in this code page to the Greek letter, but the cp437_DOSLatinUS to Unicode table[11] maps it to the micro sign.
^233 (E9hex) is identified by IBM as Greek "Theta Capital" [U+0398, Θ].[12][13] However, these symbols are for mathematics and physics, in which lowercase theta is much more commonly used (e.g. for polar coordinates).
^234 (EAhex) is identified by IBM as Greek "Omega Capital" [U+03A9, Ω] but is also used as the ohm sign [U+2126, Ω]. Unicode considers the characters to be equivalent and suggests that U+03A9 be used in both contexts.[19]
^235 (EBhex) is identified by IBM as Greek "Delta Small" [U+03B4, δ]. It was also unofficially used for the small eth [U+00F0, ð] and the partial derivative sign [U+2202, ∂]
^237 (EDhex) is identified by IBM as Greek "Phi Small (Closed Form)" [U+03D5, ϕ; or, from the italicized math set, U+1D719, 𝜙] but, Unicode maps it to the open (or "loopy") form [U+03C6, φ] in its cp437_DOSLatinUS table.[11] Comparison of IBM's Greek GCGID table[18] with Unicode's Greek code chart[20] shows where IBM, for example, reversed the open and closed forms when mapping to Unicode. This character is also used as the empty set sign [U+2205, ∅], the diameter sign [U+2300, ⌀], and the Latin letter O with stroke [U+00D8, Ø; and U+00F8, ø].
^238 (EEhex) is identified by IBM as Greek "Epsilon Small" [U+03B5, ε] but is sometimes rendered in OEM fonts as the element-of sign [U+2208, ∈]. It was often used as the euro sign [U+20AC, €]
^244 (F4hex) and 245 (F5hex) are the upper and lower portion of the integral symbol (∫), and they can be extended with the character 179 (B3hex), the vertical line of the box drawing block. 244 could also be used for the long s character [U+017F, ſ].
^249 (F9hex) and 250 (FAhex) are almost indistinguishable: the first is a slightly larger dot than the second, both were used as bullets, middle dot, and multiplication dot [U+2219, ∙]
^251 (FBhex) was also sometimes used as a check mark [U+2713, ✓].
^255 (FFhex) draws a blank space; the use as non-breaking space (NBSP) has precedent in word processors designed for the IBM PC.
The repertoire of code page 437 was taken from the character set of Wang word-processing machines, according to Bill Gates in an interview with Gates and Paul Allen that appeared in the 2 October 1995 edition of Fortune Magazine:
"... We were also fascinated by dedicated word processors from Wang, because we believed that general-purpose machines could do that just as well. That's why, when it came time to design the keyboard for the IBM PC, we put the funny Wang character set into the machine—you know, smiley faces and boxes and triangles and stuff. We were thinking we'd like to do a clone of Wang word-processing software someday."
According to an interview with David J. Bradley (developer of the PC's ROM-BIOS) the characters were decided upon during a four-hour meeting on a plane trip from Seattle to Atlanta by Andy Saenz (responsible for the video card), Lew Eggebrecht (chief engineer for the PC) and himself.[21]
The selection of graphic characters has some internal logic:
Table rows 0 and 1, codes 0 to 31 (00hex to 1Fhex), are assorted dingbats (complementary and decorative characters). The isolated character 127 (7Fhex) also belongs to this group.
Table rows 2 to 7, codes 32 to 126 (20hex to 7Ehex), are the standard ASCII printable characters.
Table rows 8 to 10, codes 128 to 175 (80hex to AFhex), are a selection of international text characters.
Table rows 11 to 13, codes 176 to 223 (B0hex to DFhex), are box drawing and block characters. This block is arranged so that characters 192 to 223 (C0hex to DFhex) contain all the right arms and right-filled areas. The original IBM PCMDA display adapter stored the code page 437 character glyphs as bitmaps eight pixels wide, but for visual enhancement displayed them every nine pixels on screen. This range of characters had the eighth pixel column duplicated by special hardware circuitry,[22] thus filling in gaps in lines and filled areas. The VGA adapter allows this behaviour to be turned on or off.[23]
Table rows 14 and 15, codes 224 to 254 (E0hex to FEhex) are devoted to mathematical symbols, where the first twelve are a selection of Greek letters commonly used in physics.
Most fonts for Microsoft Windows include the special graphic characters at the Unicode indexes shown, as they are part of the WGL4 set that Microsoft encourages font designers to support. (The monospaced raster font family Terminal was an early font that replicated all code page 437 characters, at least at some resolutions.) To draw these characters directly from these code points, a Microsoft Windows font called MS Linedraw[24] replicates all of the code page 437 characters, thus providing one way to display DOS text on a modern Windows machine as it was shown in DOS, with limitations.[25]
Code page 1055, also known as HP symbol set 0L,[26] is a subset which includes the box-drawing, half-blocks, black circles (the black circle replaces the bullet, which replaces the middle dot in this code page), and black square, and moves them to the upper half; the space is also included.[27]
Code page 437 has a series of international characters, mainly values 128 to 175 (80hex to AFhex). However, it only covers a few major Western European languages in full, including English, German and Swedish,[note 2] and so lacks several characters (mostly capital letters) important to many major Western European languages:
Danish/Norwegian: Ø and ø. Character number 237 (EDhex), the small phi (closed form), could be used as a surrogate even though it may not render well (furthermore, it tends to map to Unicode, and/or render in Unicode fonts, as the open-form phi or the closed-vertical-form phi, which are even further from the O with stroke). To compensate, the Danish/Norwegian and Icelandic code pages (865 and 861) replaced cent sign (¢) with ø and the yen sign (¥) with Ø.
Most Greek alphabet symbols were omitted, beyond the basic math symbols. (They were included in the Greek-language code pages 737 and 869. Some of the Greek symbols that were already in code page 437 had their glyphs changed from mathematical or scientific forms to match the actual use in Greek.)
Along with the cent (¢), pound sterling (£) and yen/yuan (¥) currency symbols, it has a couple of former European currency symbols: the florin (ƒ, Netherlands) and the peseta (₧, Spain). The presence of the last is unusual, since the Spanish peseta was never an internationally relevant currency, and also never had a symbol of its own; it was simply abbreviated as "Pt", "Pta", "Pts", or "Ptas". Spanish models of the IBM electric typewriter, however, also had a single position devoted to it.
Later DOS character sets, such as code page 850 (DOS Latin-1), code page 852 (DOS Central-European) and code page 737 (DOS Greek), filled the gaps for international use with some compatibility with code page 437 by retaining the single and double box-drawing characters, while discarding the mixed ones (e.g. horizontal double/vertical single). All code page 437 characters have similar glyphs in Unicode and in Microsoft's WGL4 character set, and therefore are available in most fonts in Microsoft Windows, and also in the default VGA font of the Linux kernel, and the ISO 10646 fonts for X11.
^Systems available in Eastern European, Arabic, and Asian countries often use a different set; however, these sets are designed to match 437 as much as possible. The designation "OEM", for "original equipment manufacturer", indicates that the set could be changed by the manufacturer to meet different markets.
^It also covers some less major Western European languages—as well as some other languages—in full, including Basque, Malay, and the pre-1999 TurkmenLatin alphabet, but this was likely unintended.
^Edwards, Benj (6 November 2015) [2011]. "Origins of the ASCII Smiley Character: An Email Exchange With Dr. David Bradley". Archived from the original on 28 November 2016. Retrieved 27 November 2016. If you look at the first 32 characters in the IBM PC character set you'll see lots of whimsical characters — smiley face, musical notes, playing card suits and others. These were intended for character based games [...] Since we were using 8-bit characters we had 128 new spots to fill. We put serious characters there — three columns of foreign characters, based on our Datamaster experience. Three columns of block graphic characters [...] many customers with Monochrome Display Adapter would have no graphics at all. [...] two columns had math symbols, greek letters (for math) and others [...] about the first 32 characters (x00-x1F)? [...] These characters originated with teletype transmission. But we could display them on the character based screens. So we added a set of "not serious" characters. They were intended as display only characters, not for transmission or storage. Their most probable use would be in character based games. [...] As in most things for the IBM PC, the one year development schedule left little time for contemplation and revision. [...] the character set was developed in a three person 4-hour meeting, and I was one of those on that plane from Seattle to Atlanta. There was some minor revision after that meeting, but there were many other things to design/fix/decide so that was about it. [...] the other participants in that plane trip were Andy Saenz — responsible for the video card, and Lew Eggebrecht — the chief engineer for the PC.
^Wilton, Richard (December 1987). Programmer's Guide to PC & PS/2 Video Systems: Maximum Video Performance Form the EGA, VGA, HGC, and MCGA (1st ed.). Microsoft Press. ISBN1-55615-103-9.
