Jump to content

Newell–Daganzo merge model

From Wikipedia, the free encyclopedia
(Redirected from Newell-Daganzo merge model)
Variables included in Newell–Daganzo merge model represented on diagram of merging traffic branches.

In traffic flow theory, the Newell–Daganzo merge model describes a simple procedure on how to determine the flows exiting two branch roadways and merging to flow through a single roadway. The model is simple in that it does not consider the actual merging process between vehicles as the two branch roadways come together. The only information required to calculate the flows leaving the two branch roadways are the capacities of the two branch roadways and the exiting capacity, the demands into the system, and a value describing how the two input flows interact. This latter input term is called the split priority, or merge ratio, and is defined as the proportion of the two input flows when both are operating in congested conditions.

The history of the merge model has its origins in Gordon Newell's description of the merging process,[1] but Daganzo's cell transmission model[2] lays out a diagram for a highway merge, and describes the application of the theory.

In a simplified model of the merging process,[3] the available capacity exiting the system is defined to be μ, and the capacities of the input branches are μ1 and μ2. The demands entering the system are q1D and q2D, which is defined as the demand for the merge passing through μ1 and μ2, and thus the maximum demand is the capacity of the inlet branches. The output of the model is the resulting flows that pass through the merge, q1 and q2. The assumption is made that the combined capacities of the two inlet branches are less than the capacity of the outlet branch, μ1+ μ2 ≤ μ.

Solution for model

[edit]

There are four possible states for the system to have based on the level of flow occurring in each inlet. Each inlet can be either in free flow or congestion, and thus the system can have both inlets in free flow, one or the other in congestion, or both in congestion. The flow conditions of the inlets are the determining factors in the solution of the model.

Graphical solution to determining the flows q1 and q2 in the Newell–Daganzo merge model.

The split priority, or merge ratio, is calculated when both inlets are in congestion. At this time, the total flow is μ, with inlet flows of μ1* and μ2*, the minimum capacities of the inlets when both are congested, where μ1* + μ2* = μ. The resultant flows are determined by the interaction between the two inlet flows, influenced by the physical characteristics of the intersection that cause drivers to merge in a defined manner.[4] This merging process can be defined by split priority, p, which is the ratio of μ2* to μ1* (p = μ2* / μ1*). A common split priority rule is the "zipper rule", which describes two flows merging where vehicles merging alternate between the two input streams.

Solving the model can be done graphically, where the four possible states of the system are visible on a plot of the two inlet flows, and boundaries defined by the relationships in the model.[5] The feasible region for q1 and q2 is bounded by the relationships that the flow in inlet 1 cannot be greater than μ1 and similarly for inlet 2, and the relationship of q1 + q2 = μ. All solutions must be within this region, bounded in red in the figure. A second boundary is the feasible region for demands, the maximum possible values for q1D and q2D, defined to be μ1 and μ2, and is bounded by black in the figure. The split priority, p, is plotted from the origin to the line q1 + q2 = μ.

State A1 is when both inlets are in free flow. All combination of inlet demands in this region (q1D, q2D) produce unchanged inlet flows (q1, q2). State A2 is when inlet 1 is in free flow and inlet 2 is in congestion. Inlet demands in this region produce inlet flows where all of q1D merges while q2 = μ − q2D and a queue builds in inlet 2. State A3 is when inlet 1 is in congestion and inlet 2 is in free flow. Inlet demands in this region produce inlet flows where all of q2D merges while q1 = μ − q1D and a queue builds in inlet 1. State A4 is when both inlets are in congestion. All inlet demands in this region produce inlet flows equal to where the split priority vector intersects the feasible region of q1 and 2, at (μ1*, μ2*).

See also

[edit]

References

[edit]
  1. ^ Newell, Gordon (1982). Applications of Queueing Theory (2nd ed.). London: Chapman and Hall.
  2. ^ Daganzo, Carlos (1994). "The Cell Transmission Model, part II: Network Traffic". Transportation Research Part B: Methodological. 28 (2): 279–293.
  3. ^ Cassidy, Michael J.; Ahn, Soyoung (2005). "Driver Turn-Taking Behavior in Congested Freeway Merges" (PDF). Transportation Research Record: Journal of the Transportation Research Board. 1934: 140–147. doi:10.3141/1934-15. Archived from the original (PDF) on 2011-07-17. Retrieved 2010-12-07.
  4. ^ Yu, Nie, Jingtao, Ma, and Zhang, Michael H. (2008). "A Polymorphic Dynamic Network Loading Model". Computer-Aided Civil and Infrastructure Engineering. 23 (2): 86–103. doi:10.1111/j.1467-8667.2007.00525.x. S2CID 18373326.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  5. ^ Jin, Weh-Long (2010). "Continuous Kinematic Wave Models of Merging Traffic Flow". Transportation Research Part B: Methodological. 44 (8–9): 1084–1103. arXiv:0810.3952. doi:10.1016/j.trb.2010.02.011. S2CID 11978130.