Jump to content

Musical note

From Wikipedia, the free encyclopedia
(Redirected from Natural E)

In music, notes are distinct and isolatable sounds that act as the most basic building blocks for nearly all of music. This discretization facilitates performance, comprehension, and analysis.[1] Notes may be visually communicated by writing them in musical notation.

Notes can distinguish the general pitch class or the specific pitch played by a pitched instrument. Although this article focuses on pitch, notes for unpitched percussion instruments distinguish between different percussion instruments (and/or different manners to sound them) instead of pitch. Note value expresses the relative duration of the note in time. Dynamics for a note indicate how loud to play them. Articulations may further indicate how performers should shape the attack and decay of the note and express fluctuations in a note's timbre and pitch. Notes may even distinguish the use of different extended techniques by using special symbols.

The term note can refer to a specific musical event, for instance when saying the song "Happy Birthday to You", begins with two notes of identical pitch. Or more generally, the term can refer to a class of identically sounding events, for instance when saying "the song begins with the same note repeated twice".

Distinguishing duration

[edit]

A note can have a note value that indicates the note's duration relative to the musical meter. In order of halving duration, these values are:

"American" name "British" name
double whole note double note breve
whole note whole note semibreve
half note half note minim
quarter note quarter note crotchet
eighth note eighth note quaver
sixteenth note sixteenth note semiquaver
thirty-second note thirty-second note demisemiquaver
sixty-fourth note sixty-fourth note hemidemisemiquaver
𝅘𝅥𝅲 hundred twenty-eighth note semihemidemisemiquaver, quasihemidemisemiquaver

Longer note values (e.g. the longa) and shorter note values (e.g. the two hundred fifty-sixth note) do exist, but are very rare in modern times. These durations can further be subdivided using tuplets.

A rhythm is formed from a sequence in time of consecutive notes (without particular focus on pitch) and rests (the time between notes) of various durations.

Distinguishing pitch

[edit]
The note A or La notated as a symbol on a treble clef staff.
Latin alphabet names of notes of the A minor scale on a staff.

Distinguishing pitches of a scale

[edit]

Music theory in most European countries and others[note 1] use the solfège naming convention. Fixed do uses the syllables re–mi–fa–sol–la–ti specifically for the C major scale, while movable do labels notes of any major scale with that same order of syllables.

Alternatively, particularly in English- and some Dutch-speaking regions, pitch classes are typically represented by the first seven letters of the Latin alphabet (A, B, C, D, E, F and G), corresponding to the A minor scale. Several European countries, including Germany, use H instead of B (see § 12-tone chromatic scale for details). Byzantium used the names Pa–Vu–Ga–Di–Ke–Zo–Ni (Πα–Βου–Γα–Δι–Κε–Ζω–Νη).[2]

In traditional Indian music, musical notes are called svaras and commonly represented using the seven notes, Sa, Re, Ga, Ma, Pa, Dha and Ni.

Writing notes on a staff

[edit]

In a score, each note is assigned a specific vertical position on a staff position (a line or space) on the staff, as determined by the clef. Each line or space is assigned a note name. These names are memorized by musicians and allow them to know at a glance the proper pitch to play on their instruments.


\relative c' {
c1 d1 e1 f1 g1 a1 b1 c1 b1 a1 g1 f1 e1 d1 c1
}
\layout {
   \context {
     \Staff
     \remove Time_signature_engraver
     \remove Bar_engraver
    }
 } 
\midi {
  \tempo 1 = 120
}

The staff above shows the notes C, D, E, F, G, A, B, C and then in reverse order, with no key signature or accidentals.

Accidentals

[edit]

Notes that belong to the diatonic scale relevant in a tonal context are called diatonic notes. Notes that do not meet that criterion are called chromatic notes or accidentals. Accidental symbols visually communicate a modification of a note's pitch from its tonal context. Most commonly,[note 2] the sharp symbol () raises a note by a half step, while the flat symbol () lowers a note by a half step. This half step interval is also known as a semitone (which has an equal temperament frequency ratio of 122 ≅ 1.0595). The natural symbol () indicates that any previously applied accidentals should be cancelled. Advanced musicians use the double-sharp symbol (double sharp) to raise the pitch by two semitones, the double-flat symbol (double flat) to lower it by two semitones, and even more advanced accidental symbols (e.g. for quarter tones). Accidental symbols are placed to the right of a note's letter when written in text (e.g. F is F-sharp, B is B-flat, and C is C natural), but are placed to the left of a note's head when drawn on a staff.

Systematic alterations to any of the 7 lettered pitch classes are communicated using a key signature. When drawn on a staff, accidental symbols are positioned in a key signature to indicate that those alterations apply to all occurrences of the lettered pitch class corresponding to each symbol's position. Additional explicitly-noted accidentals can be drawn next to noteheads to override the key signature for all subsequent notes with the same lettered pitch class in that bar. However, this effect does not accumulate for subsequent accidental symbols for the same pitch class.

12-tone chromatic scale

[edit]

Assuming enharmonicity, accidentals can create pitch equivalences between different notes (e.g. the note B represents the same pitch as the note C). Thus, a 12-note chromatic scale adds 5 pitch classes in addition to the 7 lettered pitch classes.

The following chart lists names used in different countries for the 12 pitch classes of a chromatic scale built on C. Their corresponding symbols are in parentheses. Differences between German and English notation are highlighted in bold typeface. Although the English and Dutch names are different, the corresponding symbols are identical.

Chromatic scale note naming conventions of various languages and countries
English C C sharp
(C)
D D sharp
(D)
E F F sharp
(F)
G G sharp
(G)
A A sharp
(A)
B
D flat
(D)
E flat
(E)
G flat
(G)
A flat
(A)
B flat
(B)
German[3][note 3] C Cis
(C)
D Dis
(D)
E F Fis
(F)
G Gis
(G)
A Ais
(A)
H
Des
(D)
Es
(E)
Ges
(G)
As
(A)
B
Swedish compromise[4] C Ciss
(C)
D Diss
(D)
E F Fiss
(F)
G Giss
(G)
A Aiss
(A)
H
Dess
(D)
Ess
(E)
Gess
(G)
Ass
(A)
Bess
(B)
Dutch[3][note 4] C Cis
(C)
D Dis
(D)
E F Fis
(F)
G Gis
(G)
A Ais
(A)
B
Des
(D)
Es
(E)
Ges
(G)
As
(A)
Bes
(B)
Romance languages[5][note 5] do do diesis
(do)
re re diesis
(re)
mi fa fa diesis
(fa)
sol sol diesis
(sol)
la la diesis
(la)
si
re bemolle
(re)
mi bemolle
(mi)
sol bemolle
(sol)
la bemolle
(la)
si bemolle
(si)
Byzantine[6] Ni Ni diesis Pa Pa diesis Vu Ga Ga diesis Di Di diesis Ke Ke diesis Zo
Pa hyphesis Vu hyphesis Di hyphesis Ke hyphesis Zo hyphesis
Japanese[7] Ha () Ei-ha
(嬰ハ)
Ni () Ei-ni
(嬰ニ)
Ho () He () Ei-he
(嬰へ)
To () Ei-to
(嬰ト)
I () Ei-i
(嬰イ)
Ro ()
Hen-ni
(変ニ)
Hen-ho
(変ホ)
Hen-to
(変ト)
Hen-i
(変イ)
Hen-ro
(変ロ)
Hindustani Indian[8] Sa
(सा)
Re Komal
(रे॒)
Re
(रे)
Ga Komal
(ग॒)
Ga
()
Ma
()
Ma Tivra
(म॑)
Pa
()
Dha Komal
(ध॒)
Dha
()
Ni Komal
(नि॒)
Ni
(नि)
Carnatic Indian Sa Shuddha Ri (R1) Chatushruti Ri (R2) Sadharana Ga (G2) Antara Ga (G3) Shuddha Ma (M1) Prati Ma (M2) Pa Shuddha Dha (D1) Chatushruti Dha (D2) Kaisika Ni (N2) Kakali Ni (N3)
Shuddha Ga (G1) Shatshruti Ri (R3) Shuddha Ni (N1) Shatshruti Dha (D3)
Bengali Indian[9] Sa
(সা)
Komôl Re
()
Re
(রে)
Komôl Ga
(জ্ঞ)
Ga
()
Ma
()
Kôṛi Ma
(হ্ম)
Pa
()
Komôl Dha
()
Dha
()
Komôl Ni
()
Ni
(নি)

Distinguishing pitches of different octaves

[edit]

Two pitches that are any number of octaves apart (i.e. their fundamental frequencies are in a ratio equal to a power of two) are perceived as very similar. Because of that, all notes with these kinds of relations can be grouped under the same pitch class and are often given the same name.

The top note of a musical scale is the bottom note's second harmonic and has double the bottom note's frequency. Because both notes belong to the same pitch class, they are often called by the same name. That top note may also be referred to as the "octave" of the bottom note, since an octave is the interval between a note and another with double frequency.

Scientific versus Helmholtz pitch notation

[edit]

Two nomenclature systems for differentiating pitches that have the same pitch class but which fall into different octaves are:

  1. Helmholtz pitch notation, which distinguishes octaves using prime symbols and letter case of the pitch class letter.
    • The octave below middle C is called the "great" octave. Notes in it and are written as upper case letters.
      • The next lower octave is named "contra". Notes in it include a prime symbol below the note's letter.
      • Names of subsequent lower octaves are preceded with "sub". Notes in each include an additional prime symbol below the note's letter.
    • The octave starting at middle C is called the "small" octave. Notes in it are written as lower case letters, so middle C itself is written c in Helmholtz notation.
      • The next higher octave is called "one-lined". Notes in it include a prime symbol above the note's letter.
      • Names of subsequently higher octaves use higher numbers before the "lined". Notes in each include an addition prime symbol above the note's letter.
  2. Scientific pitch notation, where a pitch class letter (C, D, E, F, G, A, B) is followed by a subscript Arabic numeral designating a specific octave.
    • Middle C is named C4 and is the start of the 4th octave.
      • Higher octaves use successively higher number and lower octaves use successively lower numbers.
      • The lowest note on most pianos is A0, the highest is C8.

For instance, the standard 440 Hz tuning pitch is named A4 in scientific notation and instead named a′ in Helmholtz notation.

Meanwhile, the electronic musical instrument standard called MIDI doesn't specifically designate pitch classes, but instead names pitches by counting from its lowest note: number 0 (C−1 ≈ 8.1758 Hz); up chromatically to its highest: number 127 (G9 ≈ 12,544 Hz). (Although the MIDI standard is clear, the octaves actually played by any one MIDI device don't necessarily match the octaves shown below, especially in older instruments.)

Comparison of pitch naming conventions over different octaves
Helmholtz notation 'Scientific'
note
names
MIDI
note
numbers
Frequency of
that octave's A
(in Hertz)
octave name note names
  sub-subcontra   C„‚B„‚ C−1B−1 00 – 11 13.75  
  sub-contra C„B„ C0B0 12 – 23 27.50
  contra C‚B‚ C1B1 24 – 35 55.00
  great CB C2B2 36 – 47 110.00
  small cb C3B3 48 – 59 220.00
  one-lined c′b′ C4B4 60 – 71 440.00
  two-lined c″b″ C5B5 72 – 83 880.00
  three-lined c‴b‴ C6B6 84 – 95 1 760.00
  four-lined c⁗b⁗ C7B7 096 – 107 3 520.00
  five-lined c″‴b″‴ C8B8 108 – 119 7 040.00
  six-lined c″⁗b″⁗ C9B9 120 – 127
(ends at G9)
14 080.00

Pitch frequency in hertz

[edit]

Pitch is associated with the frequency of physical oscillations measured in hertz (Hz) representing the number of these oscillations per second. While notes can have any arbitrary frequency, notes in more consonant music tends to have pitches with simpler mathematical ratios to each other.

Western music defines pitches around a central reference "concert pitch" of A4, currently standardized as 440 Hz. Notes played in tune with the 12 equal temperament system will be an integer number of half-steps above (positive ) or below (negative ) that reference note, and thus have a frequency of:

Octaves automatically yield powers of two times the original frequency, since can be expressed as when is a multiple of 12 (with being the number of octaves up or down). Thus the above formula reduces to yield a power of 2 multiplied by 440 Hz:

Logarithmic scale

[edit]
Logarithmic plot of frequency in hertz versus pitch of a chromatic scale starting on middle C. Each subsequent note has a pitch equal to the frequency of the prior note's pitch multiplied by 122.

The base-2 logarithm of the above frequency–pitch relation conveniently results in a linear relationship with or :

When dealing specifically with intervals (rather than absolute frequency), the constant can be conveniently ignored, because the difference between any two frequencies and in this logarithmic scale simplifies to:

Cents are a convenient unit for humans to express finer divisions of this logarithmic scale that are 1100th of an equally-tempered semitone. Since one semitone equals 100 cents, one octave equals 12 ⋅ 100 cents = 1200 cents. Cents correspond to a difference in this logarithmic scale, however in the regular linear scale of frequency, adding 1 cent corresponds to multiplying a frequency by 12002 (≅ 1.000578).

MIDI

[edit]

For use with the MIDI (Musical Instrument Digital Interface) standard, a frequency mapping is defined by:

where is the MIDI note number. 69 is the number of semitones between C−1 (MIDI note 0) and A4.

Conversely, the formula to determine frequency from a MIDI note is:

Pitch names and their history

[edit]

Music notation systems have used letters of the alphabet for centuries. The 6th century philosopher Boethius is known to have used the first fourteen letters of the classical Latin alphabet (the letter J did not exist until the 16th century),

A   B   C   D   E   F   G   H   I   K   L   M   N   O

to signify the notes of the two-octave range that was in use at the time[10] and in modern scientific pitch notation are represented as

A2   B2   C3   D3   E3   F3   G3   A3   B3   C4   D4   E4   F4   G4

Though it is not known whether this was his devising or common usage at the time, this is nonetheless called Boethian notation. Although Boethius is the first author known to use this nomenclature in the literature, Ptolemy wrote of the two-octave range five centuries before, calling it the perfect system or complete system – as opposed to other, smaller-range note systems that did not contain all possible species of octave (i.e., the seven octaves starting from A, B, C, D, E, F, and G). A modified form of Boethius' notation later appeared in the Dialogus de musica (ca. 1000) by Pseudo-Odo, in a discussion of the division of the monochord.[11]

Following this, the range (or compass) of used notes was extended to three octaves, and the system of repeating letters AG in each octave was introduced, these being written as lower-case for the second octave (ag) and double lower-case letters for the third (aagg). When the range was extended down by one note, to a G, that note was denoted using the Greek letter gamma (Γ), the lowest note in Medieval music notation.[citation needed] (It is from this gamma that the French word for scale, gamme derives,[citation needed] and the English word gamut, from "gamma-ut".[citation needed])

The remaining five notes of the chromatic scale (the black keys on a piano keyboard) were added gradually; the first being B, since B was flattened in certain modes to avoid the dissonant tritone interval. This change was not always shown in notation, but when written, B (B flat) was written as a Latin, cursive "𝑏 ", and B (B natural) a Gothic script (known as Blackletter) or "hard-edged" 𝕭. These evolved into the modern flat () and natural () symbols respectively. The sharp symbol arose from a ƀ (barred b), called the "cancelled b".[citation needed]

In parts of Europe, including Germany, the Czech Republic, Slovakia, Poland, Hungary, Norway, Denmark, Serbia, Croatia, Slovenia, Finland, and Iceland (and Sweden before the 1990s), the Gothic 𝕭 transformed into the letter H (possibly for hart, German for "harsh", as opposed to blatt, German for "planar", or just because the Gothic 𝕭 resembles an H). Therefore, in current German music notation, H is used instead of B (B natural), and B instead of B (B flat). Occasionally, music written in German for international use will use H for B natural and Bb for B flat (with a modern-script lower-case b, instead of a flat sign, ).[citation needed] Since a Bes or B in Northern Europe (notated Bdouble flat in modern convention) is both rare and unorthodox (more likely to be expressed as Heses), it is generally clear what this notation means.

In Italian, Portuguese, Spanish, French, Romanian, Greek, Albanian, Russian, Mongolian, Flemish, Persian, Arabic, Hebrew, Ukrainian, Bulgarian, Turkish and Vietnamese the note names are do–re–mi–fa–sol–la–si rather than C–D–E–F–G–A–B. These names follow the original names reputedly given by Guido d'Arezzo, who had taken them from the first syllables of the first six musical phrases of a Gregorian chant melody Ut queant laxis, whose successive lines began on the appropriate scale degrees. These became the basis of the solfège system. For ease of singing, the name ut was largely replaced by do (most likely from the beginning of Dominus, "Lord"), though ut is still used in some places. It was the Italian musicologist and humanist Giovanni Battista Doni (1595–1647) who successfully promoted renaming the name of the note from ut to do. For the seventh degree, the name si (from Sancte Iohannes, St. John, to whom the hymn is dedicated), though in some regions the seventh is named ti (again, easier to pronounce while singing).[citation needed]

See also

[edit]

Notes

[edit]
  1. ^ Solfège is used in Albania, Belgium, Bulgaria, France, Greece, Italy, Lithuania, Portugal, Romania, Russia, Spain, Turkey, Ukraine, most Latin American countries, Arabic-speaking and Persian-speaking countries.
  2. ^ Another style of notation, rarely used in English, uses the suffix "is" to indicate a sharp and "es" (only "s" after A and E) for a flat (e.g. Fis for F♯, Ges for G♭, Es for E♭). This system first arose in Germany and is used in almost all European countries whose main language is not English, Greek, or a Romance language (such as French, Portuguese, Spanish, Italian, and Romanian). In most countries using these suffixes, the letter H is used to represent what is B natural in English, the letter B is used instead of B♭, and Heses (i.e., H) is used instead of B (although Bes and Heses both denote the English B). Dutch-speakers in Belgium and the Netherlands use the same suffixes, but applied throughout to the notes A to G, so that B, B♭ and B have the same meaning as in English, although they are called B, Bes, and Beses instead of B, B flat and B double flat. Denmark also uses H, but uses Bes instead of Heses for B.
  3. ^ used in Austria, the Czech Republic, Germany, Denmark, Estonia, Finland, Hungary, Norway, Poland, Serbia, Slovakia, Slovenia, Sweden.
  4. ^ used in the Netherlands, and sometimes in Scandinavia after the 1990s, and Indonesia.
  5. ^ used in Italy (diesis/bemolle are Italian spellings), France, Spain, Romania, Russia, Latin America, Greece, Israel, Turkey, Latvia and many other countries.

References

[edit]
  1. ^ Nattiez 1990, p. 81, note 9.
  2. ^ Savas I. Savas (1965). Byzantine Music in Theory and in Practice. Translated by Nicholas Dufault. Hercules Press.
  3. ^ a b -is = sharp; -es (after consonant) and -s (after vowel) = flat
  4. ^ -iss = sharp; -ess (after consonant) and -ss (after vowel) = flat
  5. ^ diesis = sharp; bemolle = flat
  6. ^ diesis (or diez) = sharp; hyphesis = flat
  7. ^ (ei) = (sharp); (hen) = (flat)
  8. ^ According to Bhatkhande Notation. Tivra = (sharp); Komal = (flat)
  9. ^ According to Akarmatrik Notation (আকারমাত্রিক স্বরলিপি). Kôṛi = (sharp); Komôl = (flat)
  10. ^ Boethius, A.M.S. [[scores:De institutione musica (Boëthius, Anicius Manlius Severinus)  |De institutione musica]]: text at the International Music Score Library Project. Gottfried Friedlein [de] Boethius. Book IV, chapter 14, page 341.
  11. ^ Browne, Alma Colk (1979). Medieval letter notations: A survey of the sources (Ph.D. thesis). Urbana-Champaign, IL: University of Illinois.
    Herlinger, Jan (2002). "Medieval canonics". In Christensen, Thomas (ed.). The Cambridge History of Western Music Theory. Cambridge, UK: Cambridge University Press. ISBN 0-521-62371-5.

Bibliography

[edit]
[edit]