Jump to content

Mie–Grüneisen equation of state

From Wikipedia, the free encyclopedia
(Redirected from Mie-Grüneisen Potential)

The Mie–Grüneisen equation of state is an equation of state that relates the pressure and volume of a solid at a given temperature.[1][2] It is used to determine the pressure in a shock-compressed solid. The Mie–Grüneisen relation is a special form of the Grüneisen model which describes the effect that changing the volume of a crystal lattice has on its vibrational properties. Several variations of the Mie–Grüneisen equation of state are in use.

The Grüneisen model can be expressed in the form

where V is the volume, p is the pressure, e is the internal energy, and Γ is the Grüneisen parameter which represents the thermal pressure from a set of vibrating atoms. If we assume that Γ is independent of p and e, we can integrate Grüneisen's model to get

where and are the pressure and internal energy at a reference state usually assumed to be the state at which the temperature is 0K. In that case p0 and e0 are independent of temperature and the values of these quantities can be estimated from the Hugoniot equations. The Mie–Grüneisen equation of state is a special form of the above equation.

History

[edit]

Gustav Mie, in 1903, developed an intermolecular potential for deriving high-temperature equations of state of solids.[3] In 1912, Eduard Grüneisen extended Mie's model to temperatures below the Debye temperature at which quantum effects become important.[4] Grüneisen's form of the equations is more convenient and has become the usual starting point for deriving Mie–Grüneisen equations of state.[5]

Expressions for the Mie–Grüneisen equation of state

[edit]

A temperature-corrected version that is used in computational mechanics has the form[6][7]: 61 

where is the bulk speed of sound, is the initial density, is the current density, is Grüneisen's gamma at the reference state, is a linear Hugoniot slope coefficient, is the shock wave velocity, is the particle velocity, and is the internal energy per unit reference volume. An alternative form is

A rough estimate of the internal energy can be computed using

where is the reference volume at temperature , is the heat capacity and is the specific heat capacity at constant volume. In many simulations, it is assumed that and are equal.

Parameters for various materials

[edit]
material (kg/m3) (J/kg-K) (m/s) () () (K)
Copper 8960 390 3933 [8] 1.5 [8] 1.99 [9] 2.12 [9] 700

Derivation of the equation of state

[edit]

From Grüneisen's model we have

(1)

where and are the pressure and internal energy at a reference state. The Hugoniot equations for the conservation of mass, momentum, and energy are

where ρ0 is the reference density, ρ is the density due to shock compression, pH is the pressure on the Hugoniot, EH is the internal energy per unit mass on the Hugoniot, Us is the shock velocity, and Up is the particle velocity. From the conservation of mass, we have

Where we defined , the specific volume (volume per unit mass).

For many materials Us and Up are linearly related, i.e., Us = C0 + s Up where C0 and s depend on the material. In that case, we have

The momentum equation can then be written (for the principal Hugoniot where pH0 is zero) as

Similarly, from the energy equation we have

Solving for eH, we have

With these expressions for pH and EH, the Grüneisen model on the Hugoniot becomes

If we assume that Γ/V = Γ0/V0 and note that , we get

(2)

The above ordinary differential equation can be solved for e0 with the initial condition e0 = 0 when V = V0 (χ = 0). The exact solution is

where Ei[z] is the exponential integral. The expression for p0 is

Plots of e0 and p0 for copper as a function of χ.

For commonly encountered compression problems, an approximation to the exact solution is a power series solution of the form

and

Substitution into the Grüneisen model gives us the Mie–Grüneisen equation of state

If we assume that the internal energy e0 = 0 when V = V0 (χ = 0) we have A = 0. Similarly, if we assume p0 = 0 when V = V0 we have B = 0. The Mie–Grüneisen equation of state can then be written as

where E is the internal energy per unit reference volume. Several forms of this equation of state are possible.

Comparison of exact and first-order Mie–Grüneisen equation of state for copper.

If we take the first-order term and substitute it into equation (2), we can solve for C to get

Then we get the following expression for p:

This is the commonly used first-order Mie–Grüneisen equation of state.[citation needed]

See also

[edit]

References

[edit]
  1. ^ Roberts, J. K., & Miller, A. R. (1954). Heat and thermodynamics (Vol. 4). Interscience Publishers.
  2. ^ Burshtein, A. I. (2008). Introduction to thermodynamics and kinetic theory of matter. Wiley-VCH.
  3. ^ Mie, G. (1903) "Zur kinetischen Theorie der einatomigen Körper." Annalen der Physik 316.8, p. 657-697.
  4. ^ Grüneisen, E. (1912). Theorie des festen Zustandes einatomiger Elemente. Annalen der Physik, 344(12), 257-306.
  5. ^ Lemons, D. S., & Lund, C. M. (1999). Thermodynamics of high temperature, Mie–Gruneisen solids. American Journal of Physics, 67, 1105.
  6. ^ Zocher, M.A.; Maudlin, P.J. (2000), "An evaluation of several hardening models using Taylor cylinder impact data", Conference: COMPUTATIONAL METHODS IN APPLIED SCIENCES AND ENGINEERING, BARCELONA (ES), 09/11/2000--09/14/2000, OSTI 764004
  7. ^ Wilkins, M.L. (1999), Computer simulation of dynamic phenomena, retrieved 2009-05-12
  8. ^ a b Mitchell, A.C.; Nellis, W.J. (1981), "Shock compression of aluminum, copper, and tantalum", Journal of Applied Physics, 52 (5): 3363, Bibcode:1981JAP....52.3363M, doi:10.1063/1.329160, archived from the original on 2013-02-23, retrieved 2009-05-12
  9. ^ a b MacDonald, R.A.; MacDonald, W.M. (1981), "Thermodynamic properties of fcc metals at high temperatures", Physical Review B, 24 (4): 1715–1724, Bibcode:1981PhRvB..24.1715M, doi:10.1103/PhysRevB.24.1715