Maryhill railway station

For the former Caledonian Railway station also known as Maryhill, see Maryhill Central railway station.

Maryhill Scottish Gaelic: Cnoc Màiri
Maryhill station, looking west
General information
Location	Maryhill, Glasgow Scotland
Coordinates	55.8974°N 4.3016°W / 55.8974; -4.3016
Grid reference	NS561695
Managed by	ScotRail
Transit authority	SPT
Platforms	2
Other information
Station code	MYH
History
Original company	Glasgow, Dumbarton and Helensburgh Railway
Pre-grouping	North British Railway
Post-grouping	London and North Eastern Railway British Rail
Key dates
28 May 1858	Opened as Maryhill
2 October 1951	Closed to passengers
19 December 1960	Reopened as Maryhill Park
2 October 1961	Closed to regular passenger trains
2 March 1964	Closed for all traffic
6 December 1993	Reopened as Maryhill
Passengers
2019/20	77,044
2020/21	12,800
2021/22	44,030
2022/23	60,230
2023/24	85,170
Notes Passenger statistics from the Office of Rail and Road

Maryhill railway station is a railway station serving the Maryhill area of Glasgow, Scotland. It is located on the Maryhill Line, 4+3⁄4 miles (7.6 km) northwest of Glasgow Queen Street, a short distance east of Maryhill Viaduct and Maryhill Park Junction. It has two side platforms. Services are provided by ScotRail on behalf of Strathclyde Partnership for Transport.

Maryhill was previously the terminus for the eponymous line when it was reopened by British Rail in 1993 - the original 1858 Glasgow, Dumbarton and Helensburgh Railway "Maryhill Park" station on the same site (also the junction for the former Kelvin Valley Railway and the Stobcross Railway to Partickhill & Queens Dock) had been closed back in October 1961 by the British Transport Commission although some workmen's trains continued until 1964 after which it was subsequently demolished.

Since 2005 the service has extended to Kelvindale and Anniesland to connect with the North Clyde and Argyle Lines using a reinstated section of the former Stobcross Railway line that had previously been disused since 1980 (when the signal box that formerly controlled the junction was seriously damaged by fire) and then subsequently closed & dismantled. This extension was built to remove the need for terminating services from Queen Street to run empty through to Knightswood North Junction near Westerton in order to reverse before returning to Glasgow - a process that occupied the busy junction there for several minutes whilst the driver changed ends and crossed over from one track to the other. Ending this procedure allowed more trains on the North Clyde Line to pass through the junction, freeing up paths for services from the rebuilt branch line to Larkhall on the south side of the city to run via the Argyle Line through to Milngavie.

Services

Monday to Saturdays there is a half-hourly service eastbound to Glasgow Queen Street and westbound to Anniesland.

With the timetable revision starting on 18 May 2014, a limited hourly Sunday service now operates on this route.

Preceding station	National Rail			Following station
Summerston		ScotRail Maryhill Line		Kelvindale
	Historical railways
Lochburn		Glasgow, Dumbarton and Helensburgh Railway North British Railway		Westerton
Summerston (old)		Kelvin Valley Railway North British Railway		Terminus
Terminus		Stobcross Railway North British Railway		Anniesland

External links

• Train times and station information for Maryhill railway station from National Rail
• Railscot - Maryhill
• Video footage of Maryhill Station

Media related to Maryhill railway station at Wikimedia Commons