Jump to content

Port of Brisbane Motorway

From Wikipedia, the free encyclopedia
(Redirected from M4 (Brisbane))

Port of Brisbane Motorway

General information
TypeMotorway
Length6.9 km (4.3 mi)
Route number(s) M4
Major junctions
SW end Gateway Motorway
Murarrie
 
  • Lytton Road
  • Pritchard Street
NE end Port Drive
Lytton
Location(s)
Major suburbs / townsHemmant
Highway system

Port of Brisbane Motorway is a motorway which connects the Port of Brisbane to the Gateway Motorway. Stage 1 was opened in December 2002. The motorway was built to take freight traffic off Lytton Road, with about 4,000 vehicles travelling to the Port of Brisbane in 2002.[1] Stage 1 cost A$196 million and was finished six months ahead of schedule and A$20 million under budget.[2] The Port of Brisbane Motorway holds the M4 motorway designation.

Stage 2 includes a three kilometre extension of the existing motorway through to Pritchard Street. Construction commenced in April 2011 with completion in February 2013.[3] The project was named Port Connect, an A$385 million upgrade.[4]

A further stage of upgrade was completed on the connecting roads to the port. The project was named Port Drive Upgrade, an A$110 million upgrade from the eastern end of the Port of Brisbane Motorway through to Port Gate. Construction commenced in Q3 2016 and completed mid 2018.[5] It included duplication of Port Drive, an overpass at Kite Street intersection and duplication of Lucinda Drive.[6]

Interchanges

[edit]

The entire motorway is in the City of Brisbane local government area.

Locationkm[7]miDestinationsNotes
Murarrie00.0 Gateway Motorway (M1) – Ipswich, Gold Coast, Sunshine Coast, Brisbane AirportSouth–western motorway terminus; semi-directional T interchange
0.90.56 Lytton Road (State Route 24) – Murarrie, BrisbaneNo exit westbound
Lytton3.82.4 Lytton Road (State Route 24) / Lindum Road (State Route 30) – Hemmant, WynnumNo north–eastbound entrance; south–westbound entrance via looped ramp
5.33.3 Lytton Road (State Route 24) south / Pritchard Street (State Route 24) east – Lytton, WynnumNorth–eastbound exit and entrance only
6.23.9 Pritchard Street (State Route 24) – Lytton, WynnumSouth–westbound exit and entrance only
6.94.3 Port Drive north–east – Port of BrisbaneNorth–eastern motorway terminus: continues as Port Drive
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Road diagram

[edit]

The accompanying diagram shows the interchanges with and overpasses of the Port of Brisbane Motorway.

[edit]

See also

[edit]

References

[edit]
  1. ^ "Queensland Motorways - Port of Brisbane Motorway". Archived from the original on 10 April 2007. Retrieved 8 April 2007.
  2. ^ "Media Release - 'New motorway to deliver trade benefits to Australia' 18 December 2002". Archived from the original on 20 June 2005. Retrieved 8 April 2007.
  3. ^ "Port of Brisbane Motorway open ahead of schedule" (pdf). Queensland Government. 21 February 2013. Archived from the original on 4 March 2016. Retrieved 30 May 2013.
  4. ^ "Project Overview" (PDF). Queensland Government Department of Transport and Main Roads. 4 April 2011. Archived (PDF) from the original on 26 May 2018. Retrieved 24 May 2018.
  5. ^ "$110 million Port Drive upgrade". Queensland Government. 9 June 2016. Archived from the original on 25 May 2018. Retrieved 24 May 2018.
  6. ^ "Port Drive Upgrade". Port of Brisbane Pty Ltd. Archived from the original on 7 April 2018. Retrieved 24 May 2018.
  7. ^ "Port of Brisbane Motorway" (Map). Google Maps. Retrieved 3 June 2014.