Jump to content

Landslide: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
m Reverted edits by 61.132.128.138 (talk) to last version by LucienBOT
No edit summary
Line 49: Line 49:
Earthflows occur much more during periods of high precipitation, which saturates the ground and adds water to the slope content. Fissures develop during the movement of clay-like material creates the intrusion of water into the earthflows. Water then increases the pore-water pressure and reduces the shearing strength of the material.<ref>{{cite book|last=Easterbrook|first=Don J.|title=Surface Processes and Landforms|location=[[Upper Saddle River]]|publisher=Prentice-Hall|year=1999}}</ref>
Earthflows occur much more during periods of high precipitation, which saturates the ground and adds water to the slope content. Fissures develop during the movement of clay-like material creates the intrusion of water into the earthflows. Water then increases the pore-water pressure and reduces the shearing strength of the material.<ref>{{cite book|last=Easterbrook|first=Don J.|title=Surface Processes and Landforms|location=[[Upper Saddle River]]|publisher=Prentice-Hall|year=1999}}</ref>


=== Debris avalanche ===
=== fail ===
[[Image:Goodell Creek Debris Avalanche.jpg|thumb|[[Goodell Creek]] Debris Avalanche, Washington]]
[[Image:Goodell Creek Debris Avalanche.jpg|thumb|[[Goodell Creek]] Debris Avalanche, Washington]]
A [[debris avalanche]] is a type of slide characterized by the chaotic movement of rocks soil and debris mixed with water or ice (or both). They are usually triggered by the saturation of thickly vegetated slopes which results in an incoherent mixture of broken timber, smaller vegetation and other debris.<ref>Easterbrook, Don J. ''Surface Processes and Landforms.'' Upper Saddle River, New Jersey: Prentice-Hall, Inc, 1999.</ref>
A [[debris avalanche]] is a type of slide characterized by the chaotic movement of rocks soil and debris mixed with water or ice (or both). They are usually triggered by the saturation of thickly vegetated slopes which results in an incoherent mixture of broken timber, smaller vegetation and other debris.<ref>Easterbrook, Don J. ''Surface Processes and Landforms.'' Upper Saddle River, New Jersey: Prentice-Hall, Inc, 1999.</ref>

Revision as of 17:42, 3 September 2010

A "slump" landslide in San Mateo County, California in January 1997

A landslide or landslip is a geological phenomenon which includes a wide range of ground movement, such as rock falls, deep failure of slopes and shallow debris flows, which can occur in offshore, coastal and onshore environments. Although the action of gravity is the primary driving force for a landslide to occur, there are other contributing factors affecting the original slope stability. Typically, pre-conditional factors build up specific sub-surface conditions that make the area/slope prone to failure, whereas the actual landslide often requires a trigger before being released.

Causes of landslides

The Mameyes Landslide, in barrio Tibes, Ponce, Puerto Rico, which buried more than 100 homes, was caused by extensive accumulation of rains and, according to some sources, lightning.

Landslides occur when the stability of a slope changes from a stable to an unstable condition. A change in the stability of a slope can be caused by a number of factors, acting together or alone. Natural causes of landslides include:

landslides are aggravated by human activities, Human causes include:deforestation, cultivation and construction, which destabilize the already fragile slopes

The landslide at Surte in Sweden, 1950. It was a quick clay slide killing one person.

Types of landslide

Debris flow

File:AmbooriLandslide.jpg
Amboori debris flow, occurred on 9 November 2001 in Kerala, India. The event killed 39 people.[1]

Slope material that becomes saturated with water may develop into a debris flow or mud flow. The resulting slurry of rock and mud may pick up trees, houses and cars, thus blocking bridges and tributaries causing flooding along its path.

Debris flow is often mistaken for flash flood, but they are entirely different processes.

Muddy-debris flows in alpine areas cause severe damage to structures and infrastructure and often claim human lives. Muddy-debris flows can start as a result of slope-related factors and shallow landslides can dam stream beds, resulting in temporary water blockage. As the impoundments fail, a "domino effect" may be created, with a remarkable growth in the volume of the flowing mass, which takes up the debris in the stream channel. The solid-liquid mixture can reach densities of up to 2 tons/m³ and velocities of up to 14 m/s (Chiarle and Luino, 1998; Arattano, 2003). These processes normally cause the first severe road interruptions, due not only to deposits accumulated on the road (from several cubic metres to hundreds of cubic metres), but in some cases to the complete removal of bridges or roadways or railways crossing the stream channel. Damage usually derives from a common underestimation of mud-debris flows: in the alpine valleys, for example, bridges are frequently destroyed by the impact force of the flow because their span is usually calculated only for a water discharge. For a small basin in the Italian Alps (area = 1.76 km²) affected by a debris flow, Chiarle and Luino (1998)[citation needed] estimated a peak discharge of 750 m3/s for a section located in the middle stretch of the main channel. At the same cross section, the maximum foreseeable water discharge (by HEC-1), was 19 m³/s, a value about 40 times lower than that calculated for the debris flow that occurred.

Earth flow

A rock slide in Guerrero, Mexico

Earthflows are downslope, viscous flows of saturated, fine-grained materials, which move at any speed from slow to fast. Typically, they can move at speeds from 0.17 to 20 km/h. Though these are a lot like mudflows, overall they are slower moving and are covered with solid material carried along by flow from within. They are different from fluid flows in that they are more rapid. Clay, fine sand and silt, and fine-grained, pyroclastic material are all susceptible to earthflows. The velocity of the earthflow is all dependent on how much water content is in the flow itself: if there is more water content in the flow, the higher the velocity will be.

These flows usually begin when the pore pressures in a fine-grained mass increase until enough of the weight of the material is supported by pore water to significantly decrease the internal shearing strength of the material. This thereby creates a bulging lobe which advances with a slow, rolling motion. As these lobes spread out, drainage of the mass increases and the margins dry out, thereby lowering the overall velocity of the flow. This process causes the flow to thicken. The bulbous variety of earthflows are not that spectacular, but they are much more common than their rapid counterparts. They develop a sag at their heads and are usually derived from the slumping at the source.

Earthflows occur much more during periods of high precipitation, which saturates the ground and adds water to the slope content. Fissures develop during the movement of clay-like material creates the intrusion of water into the earthflows. Water then increases the pore-water pressure and reduces the shearing strength of the material.[2]

fail

Goodell Creek Debris Avalanche, Washington

A debris avalanche is a type of slide characterized by the chaotic movement of rocks soil and debris mixed with water or ice (or both). They are usually triggered by the saturation of thickly vegetated slopes which results in an incoherent mixture of broken timber, smaller vegetation and other debris.[3] Debris avalanches differ from debris slides because their movement is much more rapid. This is usually a result of lower cohesion or higher water content and commonly steeper slopes.

Movement

Debris slides generally begin with large blocks that slump at the head of the slide and then break apart as they move towards the toe. This process is much slower than that of a debris avalanche. In a debris avalanche this progressive failure is very rapid and the entire mass seems to somewhat liquefy as it moves down the slope. This is caused by the combination of the excessive saturation of the material, and very steep slopes. As the mass moves down the slope it generally follows stream channels leaving behind a V-shaped scar that spreads out downhill. This differs from the more U-shaped scar of a slump. Debris avalanches can also travel well past the foot of the slope due to their tremendous speed.[4]

Blockade of Hunza river

Sturzstrom

A sturzstrom is a rare, poorly understood type of landslide, typically with a long run-out. Often very large, these slides are unusually mobile, flowing very far over a low angle, flat, or even slightly uphill terrain.

Shallow landslide

Hotel Limone at the Garda Lake. Part of a hill of Devonian shale was removed to make the road, forming a dip-slope. The upper block detached along a bedding plane and is sliding down the hill, forming a jumbled pile of rock at the toe of the slide.

Landslide in which the sliding surface is located within the soil mantle or weathered bedrock (typically to a depth from few decimetres to some metres). They usually include debris slides, debris flow, and failures of road cut-slopes. Landslides occurring as single large blocks of rock moving slowly down slope are sometimes called block glides.

Shallow landslides can often happen in areas that have slopes with high permeable soils on top of low permeable bottom soils. The low permeable, bottom soils trap the water in the shallower, high permeable soils creating high water pressure in the top soils. As the top soils are filled with water and become heavy, slopes can become very unstable and slide over the low permeable bottom soils. Say there is a slope with silt and sand as its top soil and bedrock as its bottom soil. During an intense rainstorm, the bedrock will keep the rain trapped in the top soils of silt and sand. As the topsoil becomes saturated and heavy, it can start to slide over the bedrock and become a shallow landslide. R. H. Campbell did a study on shallow landslides on Santa Cruz Island California. He notes that if permeability decreases with depth, a perched water table may develop in soils at intense precipitation. When pore water pressures are sufficient to reduce effective normal stress to a critical level, failure occurs.[5]

Deep-seated landslide

Landslide of soil and regolith in Pakistan

Landslides in which the sliding surface is mostly deeply located below the maximum rooting depth of trees (typically to depths greater than ten meters). Deep-seated landslides usually involve deep regolith, weathered rock, and/or bedrock and include large slope failure associated with translational, rotational, or complex movement. These typically move slowly, only several meters per year, but occasionally move faster. They tend to be larger than shallow landslides and form along a plane of weakness such as a fault or bedding plane. They can be visually identified by concave scarps at the top and steep areas at the toe. [6]

Causing tsunamis

Landslides that occur undersea, or have impact into water, can generate tsunamis. Massive landslides can also generate megatsunamis, which are usually hundreds of metres high. In 1958, one such tsunami occurred in Lituya Bay in Alaska.

  • An avalanche, similar in mechanism to a landslide, involves a large amount of ice, snow and rock falling quickly down the side of a mountain.
  • A pyroclastic flow is caused by a collapsing cloud of hot ash, gas and rocks from a volcanic explosion that moves rapidly down an erupting volcano.

Landslide prediction mapping

Global landslide risks
Ferguson Slide on California State Route 140 in June 2006

Landslide hazard analysis and mapping can provide useful information for catastrophic loss reduction, and assist in the development of guidelines for sustainable land use planning. The analysis is used to identify the factors that are related to landslides, estimate the relative contribution of factors causing slope failures, establish a relation between the factors and landslides, and to predict the landslide hazard in the future based on such a relationship [7]. The factors that have been used for landslide hazard analysis can usually be grouped into geomorphology, geology, land use/land cover, and hydrogeology [8]. Since many factors are considered for landslide hazard mapping, GIS is an appropriate tool because it has functions of collection, storage, manipulation, display, and analysis of large amounts of spatially referenced data which can be handled fast and effectively [9]. Remote sensing techniques are also highly employed for landslide hazard assessment and analysis. Before and after aerial photographs and satellite imagery are used to gather landslide characteristics, like distribution and classification, and factors like slope, lithology, and land use/land cover to be used to help predict future events [10]. Before and after imagery also helps to reveal how the landscape changed after an event, what may have triggered the landslide, and shows the process of regeneration and recovery [11].

Using satellite imagery in combination with GIS and on-the-ground studies, it is possible to generate maps of likely occurrences of future landslides [12]. Such maps should show the locations of previous events as well as clearly indicate the probable locations of future events. In general, to predict landslides, one must assume that their occurrence is determined by certain geologic factors, and that future landslides will occur under the same conditions as past events [13]. Therefore, it is necessary to establish a relationship between the geomorphologic conditions in which the past events took place and the expected future conditions [14].

Natural disasters are a dramatic example of people living in conflict with the environment. Early predictions and warnings are essential for the reduction of property damage and loss of life. Because landslides occur frequently and can represent some of the most destructive forces on earth, it is imperative to have a good understanding as to what causes them and how people can either help prevent them from occurring or simply avoid them when they do occur. Sustainable land management and development is an essential key to reducing the negative impacts felt by landslides.

GIS offers a superior method for landslide analysis because it allows one to capture, store, manipulate, analyze, and display large amounts of data quickly and effectively. Because so many variables are involved, it is important to be able to overlay the many layers of data to develop a full and accurate portrayal of what is taking place on the Earth's surface. Researchers need to know which variables are the most important factors that trigger landslides in any given location. Using GIS, extremely detailed maps can be generated to show past events and likely future events which have the potential to save lives, property, and money.

Prehistoric landslides

Rhine cutting through Flims Rockslide debris, Switzerland
  • Landslide which moved Heart Mountain to its current location, the largest ever discovered on land. In the 48 million years since the slide occurred, erosion has removed most of the portion of the slide.
  • Flims Rockslide, ca. 13,000 km3 ([convert: unit mismatch]), Switzerland, some 10000 years ago in post-glacial Pleistocene/Holocene, the largest so far described in the alps and on dry land that can be easily identified in a modestly eroded state. [15]
  • The landslide around 200BC which formed Lake Waikaremoana on the North Island of New Zealand, where a large block of the Ngamoko Range slid and dammed a gorge of Waikaretaheke River, forming a natural reservoir up to 248 metres deep.
  • Cheekye Fan, British Columbia, Canada, ca. 25 km2 (9.7 sq mi), Late Pleistocene in age.

Prehistoric submarine landslides

Historical landslides

19th Century

20th Century

21st Century

Extraterrestrial landslides

Before and after radar images of a landslide on Venus. In the center of the image on the right, the new landslide, a bright, flow-like area, can be seen extending to the left of a bright fracture. 1990 image.
Landslide in progress on Mars, 2008-02-19

Evidence of past landslides has been detected on many bodies in the solar system, but since most observations are made by probes that only observe for a limited time and most bodies in the solar system appear to be geologically inactive not many landslides are known to have happened in recent times. Both Venus and Mars have been subject to long-term mapping by orbiting satellites, and examples of landslides have been observed on both.

See also

An infra-red view of a landslide in the Valley of the Geysers


References

  1. ^ History of landslide susceptibility and a chorology of landslide prone areas in the Western Ghats of Kerala, India. Environmental Geology. 2008. doi:10.1007/s00254-008-1431-9..
  2. ^ Easterbrook, Don J. (1999). Surface Processes and Landforms. Upper Saddle River: Prentice-Hall.
  3. ^ Easterbrook, Don J. Surface Processes and Landforms. Upper Saddle River, New Jersey: Prentice-Hall, Inc, 1999.
  4. ^ Schuster, R.L. & Krizek, R.J. (1978). Landslides: Analysis and Control. Washington, D.C.: National Academy of Sciences.
  5. ^ Renwick,W., Brumbaugh,R. & Loeher,L. 1982. Landslide Morphology and Processes on Santa Cruz Island California. Geografiska Annaler. Series A, Physical Geography, Vol. 64, No. 3/4, pp. 149-159
  6. ^ Johnson, B.F. Slippery slopes. Earth magazine. June 2010. pgs 48-55.
  7. ^ Chen,Z. and J. Wang. 2007. Landslide hazard mapping using logistic regression model in Mackenzie Valley, Canada. Natural Hazards 42:75-89.
  8. ^ Clerici, A.; S. Perego; C. Tellini; P.Vescavi. 2002. A procedure for landslide susceptibility zonation by the conditional analysis method. Geomorphology 48(4):349-364.
  9. ^ 8
  10. ^ Metternicht, G.; L. Hurni; R. Gogu. 2005. Remote sensing of landslides: An analysis of the potential contribution to geo-spatial systems for hazard assessment in mountainous environments. Remote Sensing of Environment 98: 284-303.
  11. ^ De La Ville, N.; A.C. Diaz; D. Ramirez. 2002. Remote sensing and GIS technologies as tools to support sustainable management of areas devastated by landslides. Environment, Development, and Sustainability 4: 221-229.
  12. ^ Fabbri, A.; C. Chung; A. Cendrero; J. Remondo. 2003. Is prediction of future landslides possible with a GIS? Natural Hazards 30: 487-499.
  13. ^ Lee, S. and J.A. Talib. 2005. Probabilistic landslide susceptibility and factor effect analysis. Environmental Geology 47: 982-990.
  14. ^ Olmacher, G.C. and J.C. Davis. 2003. Using multiple logistic regression and GIS technology to predict landslide hazard in northeast Kansas, USA. Engineering Geology 69(3-4): 331-343.
  15. ^ [1] A.v.Poschinger, Angewandte Geologie, Vol. 11/2, 2006 english version
  16. ^ Dingle,R.V. 1977. The anatomy of a large submarine slump on a sheared continental margin (SE Africa). Journal of Geological Society London, 134, 293-310.
  17. ^ "Hope Slide". BC Geographical Names.
  18. ^ Glissement de terrain à Saint-Jean-Vianney | Les Archives de Radio-Canada
  19. ^ Aldercrest-Banyon Landslide Kelso, Washington (1998-99)
  20. ^ Ministry of Foreign Affairs Japan: Emergency Assistance to Indonesia for Flood and Landslide Disaster in South Sulawesi Province
  21. ^ http://www.chinadaily.com.cn/china/2008-11/04/content_7170600.htm
  22. ^ Illawarra Mercury 30 July 2009
  23. ^ a b "Landslide Lake in Northwest Pakistan". NASA Earth Observatory. 2010-03-18. Retrieved 18 March 2010.
  24. ^ http://www.cbc.ca/canada/montreal/story/2010/05/11/quebec-landslide.html
  25. ^ Massive landslide in Anshun City of Guizhou Province, China June 29, 2010. Retrieved June 29, 2010.
  26. ^ Large landslide in Gansu Zhouqu August 7 August 19, 2010. Retrieved August 19, 2010.
  27. ^ http://english.peopledaily.com.cn/90001/90776/90882/7113013.html
  • Pudasaini, Shiva P., Hutter, Kolumban, Avalanche Dynamics: Dynamics of Rapid Flows of Dense Granular Avalanches. Springer, Berlin, New York, 2007, ISBN 3-540-32686-3
  • Pradhan, B., Lee, S. Use of geospatial data for the development of fuzzy algebraic operators to landslide hazard mapping: a case study in Malaysia. Applied Geomatics, Springer, Berlin, 2009, DOI 10.1007/s12518-009-0001-5
  • Chen,Z. and J. Wang. 2007. Landslide hazard mapping using logistic regression model in Mackenzie Valley, Canada. Natural Hazards 42:75-89.
  • Lee, S. Pradhan, B. Probabilistic Landslide Risk Mapping at Penang Island, Malaysia. Earth System Science, 2006, vol. 115, No. 6, December, pp. 1–12. (Springer publication)
  • Pradhan, B., Singh, R.P., Buchroithner, M.F. Estimation of Stress and Its Use in Evaluation of Landslide Prone Regions Using Remote Sensing Data". Advance in Space Research, 2005, vol. 37, pp: 698 – 709, Elsevier publication, http://dx.doi.org/10.1016/j.asr.2005.03.137
  • Pradhan, B., Lee, S. Utilization of optical remote sensing data and geographic information system tools for regional landslide hazard analysis by using binomial logistic regression model. Applied Remote Sensing, 2008, SPIE, Vol. 2: pp:1-11
  • Clerici, A.; S. Perego; C. Tellini; P.Vescavi. 2002. A procedure for landslide susceptibility zonation by the conditional analysis method. Geomorphology 48(4):349-364.
  • Metternicht, G.; L. Hurni; R. Gogu. 2005. Remote sensing of landslides: An analysis of the potential contribution to geo-spatial systems for hazard assessment in mountainous environments. Remote Sensing of Environment 98: 284-303.
  • De La Ville, N.; A.C. Diaz; D. Ramirez. 2002. Remote sensing and GIS technologies as tools to support sustainable management of areas devastated by landslides. Environment, Development, and Sustainability 4: 221-229.
  • Fabbri, A.; C. Chung; A. Cendrero; J. Remondo. 2003. Is prediction of future landslides possible with a GIS? Natural Hazards 30: 487-499.
  • Lee, S. and J.A. Talib. 2005. Probabilistic landslide susceptibility and factor effect analysis. Environmental Geology 47: 982-990.
  • Olmacher, G.C. and J.C. Davis. 2003. Using multiple logistic regression and GIS technology to predict landslide hazard in northeast Kansas, USA. Engineering Geology 69(3-4): 331-343.