Jump to content

LMS Stanier Class 2 0-4-4T

From Wikipedia, the free encyclopedia
(Redirected from LMS Stanier 0-4-4T)

LMS Stanier 0-4-4T
Push-pull fitted 41909 at Watford Junction in October 1948
Type and origin
Power typeSteam
DesignerWilliam Stanier
BuilderLMS Derby Works
Build date1932–1933
Total produced10
Specifications
Configuration:
 • Whyte0-4-4T
 • UICB2′ n2t
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.5 ft 7 in (1.702 m)
Trailing dia.3 ft 3+12 in (1.003 m)
Length35 ft 3 in (10.74 m)
Loco weight58.05 long tons (58.98 t; 65.02 short tons)
Fuel typeCoal
Fuel capacity3 long tons (3.05 t; 3.36 short tons)
Water cap.1,350 imp gal (6,100 L; 1,620 US gal)
Firebox:
 • Grate area17+12 sq ft (1.63 m2)
BoilerLMS type G6
Boiler pressure160 lbf/in2 (1.1 MPa)
Heating surface:
 • Firebox104 sq ft (9.7 m2)
 • Tubes902 sq ft (83.8 m2)
SuperheaterNone
CylindersTwo, inside
Cylinder size18 in × 26 in (457 mm × 660 mm)
Valve gearStephenson
Valve typeSlide valves
Performance figures
Tractive effort17,100 lbf (76.06 kN)
Career
Operators
Power class2P
Numbers
  • LMS: 6400–6409
  • LMS: 1900–1909 from 1946
  • BR: 41900–41909
Withdrawn1959 (9), 1962 (1)
DispositionAll scrapped

The London, Midland and Scottish Railway (LMS) Stanier Class 2 0-4-4T was a class of 10 light passenger locomotives built in 1932. Ostensibly designed under new Chief Mechanical Engineer (CME) William Stanier, they were in fact the last new design of the Midland Railway's school of engineering.

Overview

[edit]

The Midland Railway had a large number of 1P 0-4-4T and this was a larger version of the larger wheeled design, classified 2P. The ten built were numbered 6400–6409 by the LMS and renumbered 1900–1909 shortly before nationalisation, freeing the numbers for new LMS Ivatt Class 2 2-6-0s. British Railways adding 40000 to their numbers making them 41900–41909. Although the last new Midland-style design, as subsequent Stanier engines incorporated much Great Western Railway practice, they were not the last MR-designed locomotives built with some 4Fs appearing as late as 1940.

The class was originally built with stovepipe chimneys, apparently due to an oversight by Stanier due to the design for future LMS locomotive chimneys not being finalised. All were later fitted with Stanier chimneys.

Two of the locomotives were fitted with vacuum control gear in 1934 for working the motor trains on the St Alban's branch, and allocated to Watford Junction shed.[1] The remainder were fitted in the BR period and used at a number of different sheds including Warwick and Longsight.[2] (Motor trains was the terminology used by the LMS although they later became popularly referred to as push-pull trains. The suitably modified stock was marked as pull-push).

Details

[edit]
LMS 1932/3 No. LMS 1946 No. BR No. Date built Date motor gear fitted Withdrawn
6400 1900 41900 December 1932 September 1950 March 1962
6401 1901 41901 December 1932 February 1951 November 1959
6402 1902 41902 December 1932 September 1950 November 1959
6403 1903 41903 December 1932 September 1950 November 1959
6404 1904 41904 December 1932 September 1950 November 1959
6405 1905 41905 November 1932 January 1951 November 1959
6406 1906 41906 December 1932 March 1957 November 1959
6407 1907 41907 December 1932 March 1951 November 1959
6408 1908 41908 December 1932 July 1934 November 1959
6409 1909 41909 January 1933 March 1934 November 1959

Withdrawal

[edit]

All were withdrawn in November 1959 except 41900, which was withdrawn in March 1962. None were preserved.

References

[edit]
  • James, Fred; Essery, Bob (2001). "The LMS 0-4-4T Engines". LMS Journal Special Preview Issue.
  • Longworth, Hugh (2005). British Railway Steam Locomotives 1948-1968. ISBN 0-86093-593-0.
  • Rowledge, J.W.P. (1975). Engines of the LMS built 1923–51. Oxford: Oxford Publishing Company. ISBN 0-902888-59-5.
Notes
  1. ^ LMS Journal No.27, article by Keith Miles
  2. ^ BR(M) Loco Allocations 1950-68, Xpress Publishing
[edit]