Molybdate

Structure of molybdate

3D model of the molybdate ion

In chemistry, a molybdate is a compound containing an oxyanion with molybdenum in its highest oxidation state of +6: O⁻−Mo(=O)₂−O⁻. Molybdenum can form a very large range of such oxyanions, which can be discrete structures or polymeric extended structures, although the latter are only found in the solid state. The larger oxyanions are members of group of compounds termed polyoxometalates, and because they contain only one type of metal atom are often called isopolymetalates. The discrete molybdenum oxyanions range in size from the simplest MoO²⁻
₄, found in potassium molybdate up to extremely large structures found in isopoly-molybdenum blues that contain for example 154 Mo atoms. The behaviour of molybdenum is different from the other elements in group 6. Chromium only forms the chromates, CrO²⁻
₄, Cr
₂O²⁻
₇, Cr
₃O²⁻
₁₀ and Cr
₄O²⁻
₁₃ ions which are all based on tetrahedral chromium. Tungsten is similar to molybdenum and forms many tungstates containing 6 coordinate tungsten.

Examples of molybdate anions

Examples of molybdate oxyanions are:

• MoO²⁻
  ₄, in e.g. Na₂MoO₄ and the mineral powellite, CaMoO₄;
• Mo
  ₂O²⁻
  ₇, as hydrated ammonium dimolybdate. The anhydrous tetrabutylammonium salt of Mo
  ₂O²⁻
  ₇ is also known;
• Mo
  ₃O²⁻
  ₁₀ in the ethylenediamine salt;
• Mo
  ₄O²⁻
  ₁₃ in the potassium salt;
• Mo
  ₅O²⁻
  ₁₆ in the anilinium (C
  ₆H
  ₅NH⁺
  ₃) salt;
• Mo
  ₆O²⁻
  ₁₉ (hexa-molybdate) in the tetramethylammonium salt;
• Mo
  ₇O⁶⁻
  ₂₄ in ammonium heptamolybdate, (NH₄)₆Mo₇O₂₄·4H₂O;
• Mo
  ₈O⁴⁻
  ₂₆ in trimethylammonium salt.

The naming of molybdates generally follows the convention of a prefix to show the number of Mo atoms present. For example, dimolybdate for 2 molybdenum atoms; trimolybdate for 3 molybdenum atoms, etc.. Sometimes the oxidation state is added as a suffix, such as in pentamolybdate(VI). The heptamolybdate ion, Mo
₇O⁶⁻
₂₄, is often called "paramolybdate".

Structure of molybdate anions

The smaller anions, MoO²⁻
₄ and Mo
₂O²⁻
₇ feature tetrahedral centres. In MoO²⁻
₄ the four oxygens are equivalent as in sulfate and chromate, with equal bond lengths and angles. Mo
₂O²⁻
₇ can be considered to be two tetrahedra sharing a corner, i.e. with a single bridging O atom. In the larger anions molybdenum is generally, but not exclusively, 6 coordinate with edges or vertices of the MoO₆ octahedra being shared. The octahedra are distorted, typical M-O bond lengths are:

• in terminal non bridging M–O approximately 1.7 Å
• in bridging M–O–M units approximately 1.9 Å

The Mo
₈O⁴⁻
₂₆ anion contains both octahedral and tetrahedral molybdenum and can be isolated in 2 isomeric forms, alpha and beta.

The hexamolybdate image below shows the coordination polyhedra. The space filling model of the heptamolybdate image shows the close packed nature of the oxygen atoms in the structure. The oxide ion has an ionic radius of 1.40 Å, molybdenum(VI) is much smaller, 0.59 Å. There are strong similarities between the structures of the molybdates and the molybdenum oxides, (MoO₃, MoO₂ and the "crystallographic shear" oxides, Mo₉O₂₆ and Mo₁₀O₂₉) whose structures all contain close packed oxide ions.

• 
  (a) Hexamolybdate [Mo₆O₁₉]²⁻ (b) Heptamolybdate [Mo₇O₂₄]⁶⁻
• 
  Ball and stick model of heptamolybdate
• 
  Heptamolybdate with space filling oxygen atoms

Equilibrium in aqueous solution

When MoO₃, molybdenum trioxide is dissolved in alkali solution the simple MoO2−4 anion is produced:

${\ce {MoO3 + 2 NaOH -> Na2MoO4 + H2O}}$

As the pH is lowered, condensations ensue, with loss of water and the formation of Mo–O–Mo linkages. The stoichiometry leading to hexa-, hepta-, and octamolybdates are shown:

${\ce {6 [MoO4]^2- + 10 HCl -> [Mo6O19]^2- + 10 Cl- + 5 H2O}}$

${\ce {7 MoO4^2- + 8 H+ -> Mo7O24^6- + 4 H2O}}$

${\ce {Mo7O24^6- + HMoO4^- + 3 H+ -> Mo8O26^4- + 2 H2O}}$

Peroxomolybdates

Many peroxomolybdates are known. They tend to form upon treatment of molybdate salts with hydrogen peroxide. Notable is the monomer–dimer equilibrium:

${\ce {[Mo2O3(O2)2(H2O)2]^2- <=> [Mo2O3(O2)4(H2O)2]^2-}}$

Also known but unstable is [Mo(O₂)₄]²⁻ (see potassium tetraperoxochromate(V)). Some related compounds find use as oxidants in organic synthesis.

Tetrathiomolybdate

The red tetrathiomolybdate anion results when molybdate solutions are treated with hydrogen sulfide:

${\ce {[NH4]2[MoO4] + 4 H2S -> [NH4]2[MoS4] + 4 H2O}}$

Like molybdate itself, MoS2−4 undergoes condensation in the presence of acids, but these condensations are accompanied by redox processes.

Industrial uses

Catalysis

Molybdates are widely used in catalysis. In terms of scale, the largest consumer of molybdate is as a precursor to catalysts for hydrodesulfurization, the process by which sulfur is removed from petroleum. Bismuth molybdates, nominally of the composition Bi₉PMo₁₂O₅₂, catalyzes ammoxidation of propylene to acrylonitrile. Ferric molybdates are used industrially to catalyze the oxidation of methanol to formaldehyde.

Corrosion inhibitors

Sodium molybdate has been used in industrial water treatment as a corrosion inhibitor. It was initially thought that it would be a good replacement for chromate, when chromate was banned for toxicity. However, molybdate requires high concentrations when used alone, therefore complementary corrosion inhibitors are generally added, and is mainly used in high temperature closed-loop cooling circuits. According to an experimental study, molybdate has been reported as an efficient biocide against microbiologically induced corrosion (MIC), where adding 1.5 mM MoO²⁻
₄/day resulted in a 50 % decrease in the corrosion rate.

Supercapacitors

Molybdates (especially FeMoO₄, Fe₂(MoO₄)₃, NiMoO₄, CoMoO₄ and MnMoO₄) have been used as anode or cathode materials in aqueous capacitors. Due to pseudocapacitive charge storage, specific capacitance up to 1500 F g⁻¹ has been observed.

Medicine

Radioactive molybdenum-99 in the form of molybdate is used as the parent isotope in technetium-99m generators for nuclear medicine imaging.

Other

Nitrogen fixation requires molybdoenzymes in legumes (e.g., soybeans, acacia, etc.). For this reason, fertilizers often contain small amounts of molybdate salts. Coverage is typically less than a kilogram per acre.

Molybdate chrome pigments are speciality but commercially available pigments. Molybdate (usually in the form of potassium molybdate) is also used in the analytical colorimetric testing for the concentration of silica in solution, called the molybdenum blue method. Additionally, it is used in the colorimetric analysis of phosphate concentration in association with the dye malachite green.

Natural gems

Molybdate crystals as collected by gem enthusiasts with the world's best samples of crystalized molybdate coming from Madawaska Mine in Ontario (Canada).