Jump to content

Electric current

Page semi-protected
From Wikipedia, the free encyclopedia
(Redirected from Ion flow)

Electric current
A simple electric circuit, where current is represented by the letter i. The relationship between the voltage (V), resistance (R), and current (i or I) is V=IR; this is known as Ohm's law.
Common symbols
I
SI unitampere
Derivations from
other quantities
Dimension

An electric current is a flow of charged particles,[1][2][3] such as electrons or ions, moving through an electrical conductor or space. It is defined as the net rate of flow of electric charge through a surface.[4]: 2 [5]: 622  The moving particles are called charge carriers, which may be one of several types of particles, depending on the conductor. In electric circuits the charge carriers are often electrons moving through a wire. In semiconductors they can be electrons or holes. In an electrolyte the charge carriers are ions, while in plasma, an ionized gas, they are ions and electrons.[6]

In the International System of Units (SI), electric current is expressed in units of ampere (sometimes called an "amp", symbol A), which is equivalent to one coulomb per second. The ampere is an SI base unit and electric current is a base quantity in the International System of Quantities (ISQ).[7]: 15  Electric current is also known as amperage and is measured using a device called an ammeter.[5]: 788 

Electric currents create magnetic forces, which are used in motors, generators, inductors, and transformers.[8][9] In ordinary conductors, they cause Joule heating, which creates light in incandescent light bulbs. Time-varying currents emit electromagnetic waves, which are used in telecommunications to broadcast information.[10]

Symbol

The conventional symbol for current is I, which originates from the French phrase intensité du courant, (current intensity).[11][12] Current intensity is often referred to simply as current.[13] The I symbol was used by André-Marie Ampère, after whom the unit of electric current is named, in formulating Ampère's force law (1820).[14] The notation travelled from France to Great Britain, where it became standard, although at least one journal did not change from using C to I until 1896.[15]

Conventions

The electrons, the charge carriers in an electrical circuit, flow in the opposite direction of the conventional electric current.
The symbol for a battery in a circuit diagram.

The conventional direction of current, also known as conventional current,[16][17] is arbitrarily defined as the direction in which positive charges flow. In a conductive material, the moving charged particles that constitute the electric current are called charge carriers. In metals, which make up the wires and other conductors in most electrical circuits, the positively charged atomic nuclei of the atoms are held in a fixed position, and the negatively charged electrons are the charge carriers, free to move about in the metal. In other materials, notably the semiconductors, the charge carriers can be positive or negative, depending on the dopant used. Positive and negative charge carriers may even be present at the same time, as happens in an electrolyte in an electrochemical cell.

A flow of positive charges gives the same electric current, and has the same effect in a circuit, as an equal flow of negative charges in the opposite direction. Since current can be the flow of either positive or negative charges, or both, a convention is needed for the direction of current that is independent of the type of charge carriers. Negatively charged carriers, such as the electrons (the charge carriers in metal wires and many other electronic circuit components), therefore flow in the opposite direction of conventional current flow in an electrical circuit.[16][17]

Reference direction

A current in a wire or circuit element can flow in either of two directions. When defining a variable to represent the current, the direction representing positive current must be specified, usually by an arrow on the circuit schematic diagram.[18][19]: 13  This is called the reference direction of the current . When analyzing electrical circuits, the actual direction of current through a specific circuit element is usually unknown until the analysis is completed. Consequently, the reference directions of currents are often assigned arbitrarily. When the circuit is solved, a negative value for the current implies the actual direction of current through that circuit element is opposite that of the chosen reference direction.[a]: 29 

Ohm's law

Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference across the two points. Introducing the constant of proportionality, the resistance,[20] one arrives at the usual mathematical equation that describes this relationship:[21]

where I is the current through the conductor in units of amperes, V is the potential difference measured across the conductor in units of volts, and R is the resistance of the conductor in units of ohms. More specifically, Ohm's law states that the R in this relation is constant, independent of the current.[22]

Alternating and direct current

In alternating current (AC) systems, the movement of electric charge periodically reverses direction.[citation needed] AC is the form of electric power most commonly delivered to businesses and residences. The usual waveform of an AC power circuit is a sine wave, though certain applications use alternative waveforms, such as triangular or square waves. Audio and radio signals carried on electrical wires are also examples of alternating current. An important goal in these applications is recovery of information encoded (or modulated) onto the AC signal.

In contrast, direct current (DC) refers to a system in which the movement of electric charge in only one direction (sometimes called unidirectional flow).[23] Direct current is produced by sources such as batteries, thermocouples, solar cells, and commutator-type electric machines of the dynamo type. Alternating current can also be converted to direct current through use of a rectifier. Direct current may flow in a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams. An old name for direct current was galvanic current.[24]

Despite DC being mathematically and conceptually simpler than AC, it is actually less widely-used than AC. However, due to the versatility of electric circuits, there are many situations that call for one type of electric current over the other.

Power transmission

AC is almost always used for power transmission to consumers.[25] The reason behind this is the sum of multiple historical and technological details.

Besides solar power, most power generation methods produce AC current. In order to distribute electricity in the form of DC, a rectifier must be used to convert from the initial AC to DC. However, rectification is a complex, expensive, and, until recent, fairly lossy conversion, especially on the scale of power plants. This has made it historically inefficient to convert the AC generated by power plants to DC for distribution.

Along the power lines connecting power stations to consumers, voltage is stepped up and down to reduce heat loss, often multiple times. While DC inherently experiences less heat loss than AC, it cannot be stepped up or down with transformers. This is due to transformers working on the principle of induction: the changing electric field created by AC generates a changing magnetic field, which induces an electromotive force (EMF) of higher or lower voltage in the connected power line. DC, however, generally does not fluctuate much, resulting in an unchanging electric field, which generates no magnetic field, making induction impossible. While there is now technology for DC transformers, they are more complex, massive, and expensive than AC transformers, and when infrastructural power grids were being built in much of the world, such technology either didn't exist or was inefficient to utilize.

There are certain cases, however, specifically in high-voltage, long-distance power transmission (HVDC), where DC is used. The main issue with using DC in commercial power transmission is changing voltage for consumers, but this is because the voltage is changed multiple times. For safety, voltage is stepped down the closer it gets to consumers to prevent incredibly high voltage lines from running through highly populated residential areas. However, if constant voltage transmission across long distances is needed, DC outperforms AC. DC carries better over distance[26] and experiences less heat loss, as the skin effect is only observed in AC systems.[27] Additionally, out-of-phase AC systems can only be connected via DC. For example, the U.S. power grid is split into three asynchronous AC systems. For power to be transferred between any of these systems, DC must be used to mediate the transfer.[26]

Electronic devices

Household electronic devices overwhelmingly use DC. This is due to the nature of basic circuit components. Many essential components in electronic devices, such as transistors, diodes, and logic gates, operate on a one-way basis; the diode, for example, only allows current to flow in one, fixed direction. Trying to use AC with such components would immensely complicate circuit design, requiring designs to function symmetrically with respect to current direction. Additionally, CPUs update millions of times per second, much faster than the mere 100/120 times per second that AC alternates polarities. This would cause massive inconsistencies in CPU voltage and performance, meaning all devices that use CPUs must also use DC.

There are, however, devices that are indifferent to current type due to incredibly simple functionality. These devices, such as incandescent lightbulbs or some toaster ovens, operate by running current through high resistance elements, emitting EM radiation. Both AC and DC is affected by resistance, so the current type used is irrelevant, although both types may need to use different voltages to produce identical results.

Education

In university-level EM classes, whether it be algebra or calculus based, DC is typically used as an introduction to electric current. This is due to DC being mathematically and conceptually simpler than AC. A constant, direct current is, arguably, much more intuitive than one that alternates many times a second. DC power sources are also trivial to add to circuits, both in theory and in practice. For AC, however, phase must be considered when dealing with multiple power sources; whether the phase is off by 0 or π makes a massive difference in the functionality of a circuit. Additionally, circuits with capacitive and inductive elements are very easy to mathematically represent with DC. Charge on a capacitor and resistance on an inductor asymptotically stabilize with time, meaning DC systems reach steady state eventually (usually fairly quickly in mathematical practice problems). Such systems are easy to analyze once they reach steady state, and even systems that have not stabilized are not too difficult to analyze, as all the required formulas are relatively simple functions of time and initial/final voltage. AC, on the other hand, never reaches steady state. The fluctuating current means there will always be changing capacitive and inductive effects in the circuit, complicating mathematical analysis of the circuit. While the required formulas for these effects are still relatively simple functions of time and voltage, voltage is now a sinusoidal function of time, not to mention the phase delay and forwarding in capacitive and inductive elements.

Occurrences

The occurrences of electric current can be divided into three main types: inorganic, biological and technological.

Inorganic occurrences of electricity in nature

Electrostatic materials – piezoelectricity – the geophysical flow of molten iron

Natural observable examples of electric current include static electric discharge and electricity in the Earth's mantle. Electrostaticity was among the earliest discoveries of inorganic electricity occurring in nature. Already early in history, it was discovered that certain types of stone and resins, like amber, can become electrostatic when friction is applied. Rubbing amber will cause it to become negatively charged. Piezoelectricity occurs when applying mechanical strain to certain crystals, causing them to become electrically polarized. Iron monoxide (FeO), which makes up 9% of the Earth mantle, conducts electricity (especially when molten); this is believed to contribute to Earth's rotation.

Atmospheric occurrence

Lightning flashes are also one of the earliest discovered natural observable examples of electric current. Electric charge can build up vertically in dense clouds, leading to lightning that discharges in flashes to the ground. The flashes follow a path of lowest electric resistance through the air.

In the second half of the 19th century and first half of the 20th century, it was discovered that the solar wind is the source of the polar auroras[citation needed] that occur in the atmosphere near the North and South Poles. The aurora borealis and aurora australis are generated by flows of charged particles emanating from the Sun, which occur when solar activity is high (temporarily strong solar flares).

Cosmic occurrences

The discovery of Birkeland currents by Kristian Birkeland has triggered further research into electric phenomena in the magnetosphere and in the cosmos. Thanks to the research of pioneering scientists and engineers like Hannes Alfvén, Irving Langmuir and Donald E. Scott, it was discovered that electricity is ubiquitous in the universe. Plasmas account for a large part of matter in the cosmos; plasmas are electrically charged. It is now believed that plasma-filled cosmic filaments are probably responsible for transfer of electricity through the universe. Recent astrophysical research indicates that such filaments can transfer electricity both between galaxies and between star clusters. Neutron stars, pulsars, magnetars, quasars and astrophysical jets play an important role in cosmic electric phenomena. It is hypothesized that star formation in clusters is in part powered by those filaments, as the star formation mostly occurs along strings, following the plasma filaments. It is believed that the intergalactic plasma filaments are slowly rotating, because of their electric charge that generates multi-layer, concentric electromagnetic fields. This filament rotation may account for the position and rotation of galaxies. This is a field of ongoing scientific research. The James Webb Space Telescope yields new insights that enable further astrophysical exploration into this subject.

Organic occurrences of electricity – biological use of electricity

Nerve system and electromagnetic sensitivity

A biological example of current is the flow of ions in neurons and nerves, responsible for both brain activity and sensory perception. Neurons are found in all animals, even in very small animals like starfish and seahorses. Brain development is more substantial in higher organisms, enabling thought and memory. Consciousness is enabled in the highest organisms, including man. Some mammals, like whales and dolphins, are capable of wireless communication, thanks to their brain activity or quantum effects. A pod of these sea mammals can communicate, for example to warn each other of predators. Migratory birds can sense the magnetic field of the Earth, using it to coordinate their flight. Some migratory sea animals, like salmon and sea turtles, also use Earth's magnetic field to navigate during long-distance migration.

Electroreception and electrogenesis

Electroreceptive animals have the ability to perceive natural electrical stimuli. Electrogenic animals, like eels, have organs that are capable of producing electric shocks – as a means of protection or as part of predator behaviour.

Photosynthesis and electrification of mechanical energy

Some species of plants can generate electricity at a microscopic level, either through photosynthesis or through electrification of mechanical energy. For instance, the oleander is able to capture mechanical energy from wind stirring its leaves, and transform it into electricity for use in the plant. Natural photosynthesis in chlorophyll is highly efficient at converting sunlight into electricity, which then drives the chemical formation of glucose. That electricity can also be used artificially in a photo-bioelectrochemical cell.

Technological usage of electric current – wired and wireless

Man-made occurrences of electric current include the controlled flow of conduction electrons in metal wires, such as overhead power lines for long-distance energy delivery and the smaller wires within electrical and electronic devices.[citation needed] Eddy currents are electric currents that occur in conductors exposed to changing magnetic fields.[citation needed] Similarly, electric currents occur, particularly in the surface, of conductors exposed to electromagnetic waves. When oscillating electric currents flow at the correct voltages within radio antennas, radio waves are generated.

Pantographs are an example of electricity transfer through a sliding contact. The pantograph has enabled large-scale electrification of railways, subway and tram networks, as well as networks of trolleybuses.

Subsea interconnectors enable large-scale coast-to-coast electricity transfer between countries.

In electronics, other forms of electric current include the flow of electrons through resistors or through the vacuum in a vacuum tube, the flow of ions inside a battery, and the flow of holes within metals and semiconductors.

A newly developed use of electric current is wireless charging of batteries, for use in phones and electric vehicles for instance. Poynting's theorem shows that electric energy can be transferred from A to B, without carrying current from A to B. This is achieved by using one or more coils in A. The coils generate an electromagnetic field that carries the electric energy to B. Wireless charging devices could potentially be integrated in furniture, walls or road surfaces. Currently research is being done in long-distance wireless charging.

Measurement

Current can be measured using an ammeter.[28][29][30] While a galvanometer offers direct electric current measurement, it requires breaking the electrical circuit, which can be inconvenient for certain applications.[citation needed] Current can also be measured without breaking the circuit by detecting the magnetic field associated with the current.[31] Devices, at the circuit level, use various techniques to measure current:

Resistive heating

Joule heating, also known as ohmic heating and resistive heating, is the process of power dissipation[34]: 36  by which the passage of an electric current through a conductor increases the internal energy of the conductor,[35]: 846  converting thermodynamic work into heat.[35]: 846, fn. 5  The phenomenon was first studied by James Prescott Joule in 1841. Joule immersed a length of wire in a fixed mass of water and measured the temperature rise due to a known current through the wire for a 30 minute period. By varying the current and the length of the wire he deduced that the heat produced was proportional to the square of the current multiplied by the electrical resistance of the wire.

This relationship is known as Joule's Law.[34]: 36  The SI unit of energy was subsequently named the joule and given the symbol J.[7]: 20  The commonly known SI unit of power, the watt (symbol: W), is equivalent to one joule per second.[7]: 20 

Electromagnetism

Electromagnet

Magnetic field is produced by an electric current in a solenoid.

In an electromagnet a coil of wires behaves like a magnet when an electric current flows through it.[36][37] When the current is switched off, the coil loses its magnetism immediately. Electric current produces a magnetic field.[38] The magnetic field can be visualized as a pattern of circular field lines surrounding the wire that persists as long as there is current.

Electromagnetic induction

Alternating electric current flows through the solenoid, producing a changing magnetic field. This field causes an electric current to flow in the wire loop by electromagnetic induction.

Magnetic fields can also be used to make electric currents. When a changing magnetic field is applied to a conductor, an electromotive force (EMF) is induced,[35]: 1004  which starts an electric current, when there is a suitable path.

Radio waves

When an electric current flows in a suitably shaped conductor at radio frequencies, radio waves can be generated. These travel at the speed of light and can cause electric currents in distant conductors.

Conduction mechanisms in various media

In metallic solids, electric charge flows by means of electrons, from lower to higher electrical potential. In other media, any stream of charged objects (ions, for example) may constitute an electric current. To provide a definition of current independent of the type of charge carriers, conventional current is defined as moving in the same direction as the positive charge flow. So, in metals where the charge carriers (electrons) are negative, conventional current is in the opposite direction to the overall electron movement. In conductors where the charge carriers are positive, conventional current is in the same direction as the charge carriers.

In a vacuum, a beam of ions or electrons may be formed. In other conductive materials, the electric current is due to the flow of both positively and negatively charged particles at the same time. In still others, the current is entirely due to positive charge flow. For example, the electric currents in electrolytes are flows of positively and negatively charged ions. In a common lead-acid electrochemical cell, electric currents are composed of positive hydronium ions flowing in one direction, and negative sulfate ions flowing in the other. Electric currents in sparks or plasma are flows of electrons as well as positive and negative ions. In ice and in certain solid electrolytes, the electric current is entirely composed of flowing ions.

Metals

In a metal, some of the outer electrons in each atom are not bound to the individual molecules as they are in molecular solids, or in full bands as they are in insulating materials, but are free to move within the metal lattice. These conduction electrons can serve as charge carriers, carrying a current. Metals are particularly conductive because there are many of these free electrons. With no external electric field applied, these electrons move about randomly due to thermal energy but, on average, there is zero net current within the metal. At room temperature, the average speed of these random motions is 106 metres per second.[39] Given a surface through which a metal wire passes, electrons move in both directions across the surface at an equal rate. As George Gamow wrote in his popular science book, One, Two, Three...Infinity (1947), "The metallic substances differ from all other materials by the fact that the outer shells of their atoms are bound rather loosely, and often let one of their electrons go free. Thus the interior of a metal is filled up with a large number of unattached electrons that travel aimlessly around like a crowd of displaced persons. When a metal wire is subjected to electric force applied on its opposite ends, these free electrons rush in the direction of the force, thus forming what we call an electric current."

When a metal wire is connected across the two terminals of a DC voltage source such as a battery, the source places an electric field across the conductor. The moment contact is made, the free electrons of the conductor are forced to drift toward the positive terminal under the influence of this field. The free electrons are therefore the charge carrier in a typical solid conductor.

For a steady flow of charge through a surface, the current I (in amperes) can be calculated with the following equation: where Q is the electric charge transferred through the surface over a time t. If Q and t are measured in coulombs and seconds respectively, I is in amperes.

More generally, electric current can be represented as the rate at which charge flows through a given surface as:

Electrolytes

A proton conductor in a static electric field.

Electric currents in electrolytes are flows of electrically charged particles (ions). For example, if an electric field is placed across a solution of Na+ and Cl (and conditions are right) the sodium ions move towards the negative electrode (cathode), while the chloride ions move towards the positive electrode (anode). Reactions take place at both electrode surfaces, neutralizing each ion.

Water-ice and certain solid electrolytes called proton conductors contain positive hydrogen ions ("protons") that are mobile. In these materials, electric currents are composed of moving protons, as opposed to the moving electrons in metals.

In certain electrolyte mixtures, brightly coloured ions are the moving electric charges. The slow progress of the colour makes the current visible.[40]

Gases and plasmas

In air and other ordinary gases below the breakdown field, the dominant source of electrical conduction is via relatively few mobile ions produced by radioactive gases, ultraviolet light, or cosmic rays. Since the electrical conductivity is low, gases are dielectrics or insulators. However, once the applied electric field approaches the breakdown value, free electrons become sufficiently accelerated by the electric field to create additional free electrons by colliding, and ionizing, neutral gas atoms or molecules in a process called avalanche breakdown. The breakdown process forms a plasma that contains enough mobile electrons and positive ions to make it an electrical conductor. In the process, it forms a light emitting conductive path, such as a spark, arc or lightning.

Plasma is the state of matter where some of the electrons in a gas are stripped or "ionized" from their molecules or atoms. A plasma can be formed by high temperature, or by application of a high electric or alternating magnetic field as noted above. Due to their lower mass, the electrons in a plasma accelerate more quickly in response to an electric field than the heavier positive ions, and hence carry the bulk of the current. The free ions recombine to create new chemical compounds (for example, breaking atmospheric oxygen into single oxygen [O2 → 2O], which then recombine creating ozone [O3]).[41]

Vacuum

Since a "perfect vacuum" contains no charged particles, it normally behaves as a perfect insulator. However, metal electrode surfaces can cause a region of the vacuum to become conductive by injecting free electrons or ions through either field electron emission or thermionic emission. Thermionic emission occurs when the thermal energy exceeds the metal's work function, while field electron emission occurs when the electric field at the surface of the metal is high enough to cause tunneling, which results in the ejection of free electrons from the metal into the vacuum. Externally heated electrodes are often used to generate an electron cloud as in the filament or indirectly heated cathode of vacuum tubes. Cold electrodes can also spontaneously produce electron clouds via thermionic emission when small incandescent regions (called cathode spots or anode spots) are formed. These are incandescent regions of the electrode surface that are created by a localized high current. These regions may be initiated by field electron emission, but are then sustained by localized thermionic emission once a vacuum arc forms. These small electron-emitting regions can form quite rapidly, even explosively, on a metal surface subjected to a high electrical field. Vacuum tubes and sprytrons are some of the electronic switching and amplifying devices based on vacuum conductivity.

Superconductivity

Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in certain materials when cooled below a characteristic critical temperature. It was discovered by Heike Kamerlingh Onnes on April 8, 1911 in Leiden. Like ferromagnetism and atomic spectral lines, superconductivity is a quantum mechanical phenomenon. It is characterized by the Meissner effect, the complete ejection of magnetic field lines from the interior of the superconductor as it transitions into the superconducting state. The occurrence of the Meissner effect indicates that superconductivity cannot be understood simply as the idealization of perfect conductivity in classical physics.

Semiconductor

In a semiconductor it is sometimes useful to think of the current as due to the flow of positive "holes" (the mobile positive charge carriers that are places where the semiconductor crystal is missing a valence electron). This is the case in a p-type semiconductor. A semiconductor has electrical conductivity intermediate in magnitude between that of a conductor and an insulator. This means a conductivity roughly in the range of 10−2 to 104 siemens per centimeter (S⋅cm−1).

In the classic crystalline semiconductors, electrons can have energies only within certain bands (i.e. ranges of levels of energy). Energetically, these bands are located between the energy of the ground state, the state in which electrons are tightly bound to the atomic nuclei of the material, and the free electron energy, the latter describing the energy required for an electron to escape entirely from the material. The energy bands each correspond to many discrete quantum states of the electrons, and most of the states with low energy (closer to the nucleus) are occupied, up to a particular band called the valence band. Semiconductors and insulators are distinguished from metals because the valence band in any given metal is nearly filled with electrons under usual operating conditions, while very few (semiconductor) or virtually none (insulator) of them are available in the conduction band, the band immediately above the valence band.

The ease of exciting electrons in the semiconductor from the valence band to the conduction band depends on the band gap between the bands. The size of this energy band gap serves as an arbitrary dividing line (roughly 4 eV) between semiconductors and insulators.

With covalent bonds, an electron moves by hopping to a neighboring bond. The Pauli exclusion principle requires that the electron be lifted into the higher anti-bonding state of that bond. For delocalized states, for example in one dimension – that is in a nanowire, for every energy there is a state with electrons flowing in one direction and another state with the electrons flowing in the other. For a net current to flow, more states for one direction than for the other direction must be occupied. For this to occur, energy is required, as in the semiconductor the next higher states lie above the band gap. Often this is stated as: full bands do not contribute to the electrical conductivity. However, as a semiconductor's temperature rises above absolute zero, there is more energy in the semiconductor to spend on lattice vibration and on exciting electrons into the conduction band. The current-carrying electrons in the conduction band are known as free electrons, though they are often simply called electrons if that is clear in context.

Current density and Ohm's law

Current density is the rate at which charge passes through a chosen unit area.[42]: 31  It is defined as a vector whose magnitude is the current per unit cross-sectional area.[5]: 749  As discussed in Reference direction, the direction is arbitrary. Conventionally, if the moving charges are positive, then the current density has the same sign as the velocity of the charges. For negative charges, the sign of the current density is opposite to the velocity of the charges.[5]: 749  In SI units, current density (symbol: j) is expressed in the SI base units of amperes per square metre.[7]: 22 

In linear materials such as metals, and under low frequencies, the current density across the conductor surface is uniform. In such conditions, Ohm's law states that the current is directly proportional to the potential difference between two ends (across) of that metal (ideal) resistor (or other ohmic device):

where is the current, measured in amperes; is the potential difference, measured in volts; and is the resistance, measured in ohms. For alternating currents, especially at higher frequencies, skin effect causes the current to spread unevenly across the conductor cross-section, with higher density near the surface, thus increasing the apparent resistance.

Drift speed

The mobile charged particles within a conductor move constantly in random directions, like the particles of a gas. (More accurately, a Fermi gas.) To create a net flow of charge, the particles must also move together with an average drift rate. Electrons are the charge carriers in most metals and they follow an erratic path, bouncing from atom to atom, but generally drifting in the opposite direction of the electric field. The speed they drift at can be calculated from the equation: where

  • is the drift velocity
  • is the electric current
  • is number of charged particles per unit volume (or charge carrier density)
  • is the cross-sectional area of the conductor
  • is the charge on each particle.

Typically, electric charges in solids flow slowly. For example, in a copper wire of cross-section 0.5 mm2, carrying a current of 5 A, the drift velocity of the electrons is on the order of a millimetre per second. To take a different example, in the near-vacuum inside a cathode-ray tube, the electrons travel in near-straight lines at about a tenth of the speed of light.

Any accelerating electric charge, and therefore any changing electric current, gives rise to an electromagnetic wave that propagates at very high speed outside the surface of the conductor. This speed is usually a significant fraction of the speed of light, as can be deduced from Maxwell's equations, and is therefore many times faster than the drift velocity of the electrons. For example, in AC power lines, the waves of electromagnetic energy propagate through the space between the wires, moving from a source to a distant load, even though the electrons in the wires only move back and forth over a tiny distance.

The ratio of the speed of the electromagnetic wave to the speed of light in free space is called the velocity factor, and depends on the electromagnetic properties of the conductor and the insulating materials surrounding it, and on their shape and size.

The magnitudes (not the natures) of these three velocities can be illustrated by an analogy with the three similar velocities associated with gases. (See also hydraulic analogy.)

  • The low drift velocity of charge carriers is analogous to air motion; in other words, winds.
  • The high speed of electromagnetic waves is roughly analogous to the speed of sound in a gas (sound waves move through air much faster than large-scale motions such as convection)
  • The random motion of charges is analogous to heat – the thermal velocity of randomly vibrating gas particles.

See also

Notes

  1. ^ Our first step in the analysis is the assumption of reference directions for the unknown currents.[19]

References

  1. ^ McMonagle, Derek; Anning, Pauline (2016-03-31). Integrated Science for CSEC®. OUP Oxford. p. 206. ISBN 978-0-19-839562-1.
  2. ^ Facer, George (2015-05-15). George Facer's Edexcel A Level Chemistry Student Book 1. Hodder Education. ISBN 978-1-4718-3282-6.
  3. ^ Morris, Andrew (2022-10-19). Bugs, Drugs and Three-pin Plugs: Everyday Science, Simply Explained. CRC Press. ISBN 978-1-000-72984-9.
  4. ^ Horowitz, Paul; Hill, Winfield (2015). The art of electronics (3rd ed.). Cambridge University Press. ISBN 978-0-521-80926-9.
  5. ^ a b c d Walker, Jearl; Halliday, David; Resnick, Robert (2014). Fundamentals of physics (10th ed.). Hoboken, NJ: Wiley. ISBN 978-1118230732. OCLC 950235056.
  6. ^ Anthony C. Fischer-Cripps (2004). The electronics companion. CRC Press. p. 13. ISBN 978-0-7503-1012-3.
  7. ^ a b c d The International System of Units (PDF) (9th ed.), International Bureau of Weights and Measures, Dec 2022, ISBN 978-92-822-2272-0
  8. ^ Blackwell, Glenn R. (2017-12-19). The Electronic Packaging Handbook. CRC Press. ISBN 978-1-351-83554-1.
  9. ^ Singh, Kulwant (2023-08-30). Science Laws and Their Applications. Cambridge Scholars Publishing. p. 214. ISBN 978-1-5275-2911-3.
  10. ^ DK (2020-10-01). The Visual Encyclopedia. Dorling Kindersley Limited. p. 272. ISBN 978-0-241-50166-5.
  11. ^ Lowe, T. L.; Rounce, John (2002). Calculations for A-level Physics. Nelson Thornes. p. 2. ISBN 0748767487.
  12. ^ Berlin, Howard M.; Getz, Frank C. (1988). Principles of Electronic Instrumentation and Measurement. Merrill Pub. Co. p. 37. ISBN 0675204496.
  13. ^ Kumar, K. S. Suresh (2013). "Section 1.2.3". Electric Circuit Analysis. Pearson Education India. ISBN 978-9332514102. 'Current intensity' is usually referred to as 'current' itself.
  14. ^ Ampère, A-M (1822). "Recueil d'Observations Électro-dynamiques" (PDF) (in French). Paris: Chez Crochard Libraire. p. 56. Archived (PDF) from the original on 2011-07-24.
  15. ^ Electric Power. Vol. 6. 1894. pp. 411, 1894.
  16. ^ a b Avison, John (2014). The World of Physics. Thomas Nelson and Sons. p. 221. ISBN 9780174387336.
  17. ^ a b McComb, Gordon; Boysen, Earl (2005). Electronics For Dummies. Wiley. p. 12. ISBN 9780764597190.
  18. ^ Kumar, K. S. Suresh (2008). Electric Circuits & Networks. Pearson Education India. pp. 26–28. ISBN 978-8131713907.
  19. ^ a b Hayt, William (1989). Engineering Electromagnetics (5th ed.). McGraw-Hill. ISBN 0070274061.
  20. ^ Consoliver, Earl L.; Mitchell, Grover I. (1920). Automotive ignition systems. McGraw-Hill. p. 4. ohm's law current proportional voltage resistance.
  21. ^ Robert A. Millikan and E. S. Bishop (1917). Elements of Electricity. American Technical Society. p. 54. Ohm's law current directly proportional.
  22. ^ Oliver Heaviside (1894). Electrical papers. Vol. 1. Macmillan and Co. p. 283. ISBN 978-0-8218-2840-3.
  23. ^ Hacker, Viktor; Sumereder, Christof (2020-03-23). Electrical Engineering: Fundamentals. Walter de Gruyter GmbH & Co KG. p. 13. ISBN 978-3-11-052111-5.
  24. ^ Andrew J. Robinson; Lynn Snyder-Mackler (2007). Clinical Electrophysiology: Electrotherapy and Electrophysiologic Testing (3rd ed.). Lippincott Williams & Wilkins. p. 10. ISBN 978-0-7817-4484-3.
  25. ^ "The War of the Currents: AC vs. DC Power". Energy.gov. Retrieved 2024-07-17.
  26. ^ a b "Connecting the Country with HVDC". Energy.gov. Retrieved 2024-07-20.
  27. ^ Kolobov, V I; Economou, D J (16 December 1996). "The anomalous skin effect in gas discharge plasmas" (PDF). Plasma Sources Science and Technology: 1.
  28. ^ Johnson, Keith (2001). Physics for You. Nelson Thornes. p. 256. ISBN 978-0-7487-6236-1.
  29. ^ Loznen, Steli; Bolintineanu, Constantin; Swart, Jan (2017-05-31). Electrical Product Compliance and Safety Engineering. Artech House. p. 343. ISBN 978-1-63081-456-4.
  30. ^ Roberts, Simon (1991). Solar Electricity: A Practical Guide to Designing and Installing Small Photovoltaic Systems. Prentice Hall. p. 351. ISBN 978-0-13-826314-0.
  31. ^ Jaroszewski, Maciej; Thomas, Sabu; Rane, Ajay V. (2018-11-29). Advanced Materials for Electromagnetic Shielding: Fundamentals, Properties, and Applications. John Wiley & Sons. p. 42. ISBN 978-1-119-12861-8.
  32. ^ "What is a Current Sensor and How is it Used?". Retrieved 2011-12-22.
  33. ^ Friedrich, Andreas P.; Lemme, Helmuth (2000-05-01). "The Universal Current Sensor". Fierce Electronics. Archived from the original on 2016-03-04. Retrieved 2011-12-22.
  34. ^ a b Jaffe, Robert L.; Taylor, Washington (2018). The physics of energy. Cambridge University Press.
  35. ^ a b c Serway, Raymond A.; Jewett, John W. (2004). Physics for Scientists and Engineers (6th ed.). Thomson Brooks/Cole. ISBN 0-534-40842-7.
  36. ^ Board, Oswaal Editorial (2024-02-15). NCERT Textbook Solution Class 7 Science | For 2024 Exam. Oswaal Books. p. 50. ISBN 978-93-5958-334-1.
  37. ^ Board, Oswaal Editorial (2024-03-08). Oswaal NCERT Textbook Solution Class 7 Science | Mathematics | Set of 2 Books | For Latest Exam. Oswaal Books. p. 50. ISBN 978-93-5728-587-2.
  38. ^ Kumar, Kiran Ashok. New Inquisitive Science Book 7. S. Chand Publishing. p. 170. ISBN 978-93-85676-60-4.
  39. ^ "The Mechanism Of Conduction In Metals". Think Quest. Archived from the original on 2012-10-25.
  40. ^ Holze, Rudolf (2009). Experimental Electrochemistry: A Laboratory Textbook. John Wiley & Sons. p. 44. ISBN 978-3527310982.
  41. ^ "Lab Note #106 Environmental Impact of Arc Suppression". Arc Suppression Technologies. April 2011. Retrieved March 15, 2012.
  42. ^ Zangwill, Andrew (2013). Modern Electrodynamics. Cambridge University Press. ISBN 978-0-521-89697-9.