Jump to content

Queens Village station

Coordinates: 40°43′03″N 73°44′11″W / 40.717469°N 73.73638°W / 40.717469; -73.73638
From Wikipedia, the free encyclopedia
(Redirected from Inglewood (LIRR station))

Queens Village
The front entrance to Queens Village station, following its 2013 rehabilitation and modernization.
General information
LocationJamaica Avenue and Springfield Boulevard
Queens Village, Queens, New York
Coordinates40°43′03″N 73°44′11″W / 40.717469°N 73.73638°W / 40.717469; -73.73638
Owned byLong Island Rail Road
Line(s)
Distance13.2 mi (21.2 km) from Long Island City[1]
Platforms2 side platforms
Tracks5 (1 used for storage)
ConnectionsBus transport New York City Bus: Q1, Q27, Q36, Q83, Q88
Bus transport Nassau Inter-County Express: n24
Construction
ParkingYes; Metered and Private
AccessibleYes
Other information
Fare zone3
History
Opened1879[2]
Rebuilt1924, 2013
ElectrifiedOctober 2, 1905?
750 V (DC) third rail
Previous namesInglewood (1871–1879)[3]
Queens (1879–1924)[4]
Passengers
20061,582[5]
Services
Preceding station Long Island Rail Road Following station
Hollis Hempstead Branch Elmont–UBS Arena
toward Hempstead
     Belmont Park Branch does not stop here
     Port Jefferson Branch does not stop here
     Oyster Bay Branch does not stop here
     Ronkonkoma Branch does not stop here
     Montauk Branch does not stop here
Former services
Preceding station Long Island
Rail Road
Following station
Bellaire Main Line Bellerose
toward Greenport
Location
Map

The Queens Village station is a commuter rail station on the Long Island Rail Road's Main Line, located between 218th Street and Springfield Boulevard, in the Queens Village neighborhood of Queens, New York City. It has two side platforms along the four-track line, and is served primarily by Hempstead Branch trains.

Just east of the station is Queens Interlocking, a universal interlocking that splits the four-track line into two parallel two-track lines—the Main Line and Hempstead Branch—and controls the junction with the spur to Belmont Park. The station is elevated and the tracks leading in and out are on raised ground and only above the road at intersections.

History

[edit]
1909 Map of Queens (now Queens Village) station.

Between March and November 1837, the current site of Queens Village station was the site of an early Brooklyn and Jamaica Railroad station named Flushing Avenue station then renamed DeLancey Avenue station and later named Brushville station until it was moved to what is today 212nd Street, the site of the former Bellaire station, which was used to serve Ben Lane's Hotel. By 1871, a new station was originally installed across Jericho Turnpike from the estate of Colonel A.M. Wood which was on the northwest corner of Springfield Boulevard. The estate was named "Inglewood," and the new station which resulted in the closing of the Brushville-Ben Lane's station was named for this estate.

Queens Village station originally opened at ground level as Queens station in 1879 (some sources say 1881). The original station house contained a sign with the distance to Long Island City and Greenport stations.[6] The station house was moved to a private location as a new one was being built as part of a grade elimination project, and opened on September 24, 1924. It was then renamed "Queens Village." On October 30, 2013, the LIRR unveiled a renovated station, with passenger elevators, improved lighting, security cameras and a repainted building.[7]

One of the renovated platforms and new elevators installed, as seen following the renovations from the bridge over Springfield Blvd.

Station layout

[edit]

The station has two high-level side platforms, both of which are eight cars long and are served by a passenger elevator and stairs. Platform A has the station's only station house, a two-story building. The two middle tracks, not next to either platform, are used by the Port Jefferson, Ronkonkoma, Oyster Bay, and Montauk branch trains.

A non-powered storage track is south of the south platform. The Queens Village Freight Yard is located just west of the station, and consists of three tracks. It is used by the LIRR for maintenance and storage, and was sporadically utilized by LIRR freight customers, as well, before the New York and Atlantic Railway assumed freight service operations.[citation needed]

Services

[edit]

Queens Village station is primarily served by Hempstead Branch trains. Several Port Jefferson and Ronkonkoma Branch trains also serve here.[8][9]

P
Platform level
Platform A, side platform Disabled access
Track 3      Hempstead Branch toward Grand Central Madison, Atlantic Terminal, or Penn Station (Hollis)
Track 1      Main Line services do not stop here →
Track 2      Main Line services do not stop here →
Track 4      Hempstead Branch toward Hempstead (Elmont–UBS Arena)
Platform B, side platform Disabled access
G

References

[edit]
  1. ^ Long Island Rail Road (May 14, 2012). "TIMETABLE No. 4" (PDF). p. III. Retrieved August 4, 2022.
  2. ^ "Long Island Railroad". Brooklyn Daily Eagle. Brooklyn, NY. October 3, 1879. p. 1.
  3. ^ Brushville and Queens Village Station Histories (Arrt's Arrchives)
  4. ^ Long Island Railroad Station History (TrainsAreFun.com) Archived January 6, 2011, at the Wayback Machine
  5. ^ Average weekday, 2006 LIRR Origin and Destination Study
  6. ^ Morrison, David D.; Pakaluk, Valerie (2003). Long Island Rail Road Stations (Images of Rail). Chicago: Arcadia Publishing. ISBN 0-7385-1180-3.
  7. ^ "MTA Long Island Rail Road Unveils Restored Queens Village Station". Metropolitan Transportation Authority. October 30, 2013. Archived from the original on January 3, 2015.
  8. ^ Port Jefferson Branch Timetable, Long Island Railroad, September 6, 2022, retrieved December 26, 2022
  9. ^ "LIRR Schedules". MTA. Retrieved December 26, 2022.
[edit]