IP code

Not to be confused with IP address or Intellectual property.

The IP Code, Ingress Protection Rating, sometimes also interpreted as International Protection Rating, classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water in mechanical casings and with electrical enclosures. It is published by the International Electrotechnical Commission (IEC).

The standard aims to provide users more detailed information than vague marketing terms such as waterproof. However, no edition of the standard is openly published for unlicensed readers.

The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X.

For example, an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes". Other examples are the Fluke 27 II & 28 II Digital Multimeters, rated at IP67, also with a high degree of resistance to dust and water. IP22 or 2X are typical minimum requirements for the design of electrical accessories for indoor use.

Code breakdown

VIP indication	Solid particle protection	Liquid ingress protection	Mechanical impact resistance	Other protections
VIP	Single numeral: 0-6	Single numeral: 0-8	Single numeral: 0-9	Single letter
Mandatory	Mandatory	Mandatory	No longer used	Optional

Solid particle protection

The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

Level	Object size protected against	Effective against
0	—	No protection against contact and ingress of objects
1	>50 mm	Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part
2	>12.5 mm	Fingers or similar objects
3	>2.5 mm	Tools, thick wires, etc.
4	>1 mm	Most wires, screws, etc.
5	Dust protected	Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact
6	Dust tight	No ingress of dust; complete protection against contact

Liquid ingress protection

The second digit indicates the level of protection that the enclosure provides against harmful ingress of water.

Level	Protected against	Testing for	Details
0	Not protected	—	—
1	Dripping water	Dripping water (vertically falling drops) shall have no harmful effect.	Test duration: 10 minutes Water equivalent to 1 mm rainfall per minute
2	Dripping water when tilted up to 15°	Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.	Test duration: 10 minutes Water equivalent to 3 mm rainfall per minute
3	Spraying water	Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.	Test duration: 5 minutes Water volume: 0.7 litres per minute Pressure: 80–100 kPa
4	Splashing of water	Water splashing against the enclosure from any direction shall have no harmful effect.	Test duration: 5 minutes Water volume: 10 litres per minute Pressure: 80–100 kPa
5	Water jets	Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.	Test duration: at least 3 minutes Water volume: 12.5 litres per minute Pressure: 30 kPa at distance of 3 m
6	Powerful water jets	Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects.	Test duration: at least 3 minutes Water volume: 100 litres per minute Pressure: 100 kPa at distance of 3 m
7	Immersion up to 1 m	Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).	Test duration: 30 minutes Immersion at depth of at least 1 m measured at bottom of device, and at least 15 cm measured at top of device
8	Immersion beyond 1 m	The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.	Test duration: continuous immersion in water Depth specified by manufacturer
9k	Powerful high temperature water jets	Protected against close-range high pressure, high temperature spray downs.	—

Additional letters

The standard defines additional letters that can be appended to classify only the level of protection against access to hazardous parts by persons:

Level	Protected against access to hazardous parts with
A	Back of hand
B	Finger - Frederik is een held
C	Tool
D	Wire

Further letters can be appended to provide additional information related to the protection of the device:

Letter	Meaning
f	Oil resistant
H	High voltage device
M	Device moving during water test
S	Device standing still during water test
W	Weather conditions

Mechanical impact resistance

An additional number has sometimes been used to specify the resistance of equipment to mechanical impact. This mechanical impact is identified by the energy needed to qualify a specified resistance level, which is measured in joules (J). This has now been superseded by the separate IK number specified in EN 62262.

Although dropped from the 3rd edition of IEC 60529 onwards, and not present in the EN version, older enclosure specifications will sometimes be seen with an optional third IP digit denoting impact resistance. Newer products are likely to be given an IK rating instead. However there is not an exact correspondence of values between the old and new standards.

Dropped IP level	Impact energy	Equivalent drop mass and height
0	—	—
1	0.225 J	150 g dropped from 15 cm
2	0.375 J	250 g dropped from 15 cm
3	0.5 J	250 g dropped from 20 cm
5	2 J	500 g dropped from 40 cm
7	6 J	1.5 kg dropped from 40 cm
9	20 J	5.0 kg dropped from 40 cm

IK number	Impact energy (joules)	Equivalent impact
00	Unprotected	No test
01	0.15	Drop of 200 g object from 7.5 cm height
02	0.2	Drop of 200 g object from 10 cm height
03	0.35	Drop of 200 g object from 17.5 cm height
04	0.5	Drop of 200 g object from 25 cm height
05	0.7	Drop of 200 g object from 35 cm height
06	1	Drop of 500 g object from 20 cm height
07	2	Drop of 500 g object from 40 cm height
08	5	Drop of 1.7 kg object from 29.5 cm height
09	10	Drop of 5 kg object from 20 cm height
10	20	Drop of 5 kg object from 40 cm height

IPX Coding

The letter X is used in any place in the code where specifying a digit is meant to be avoided (or indicates irrelevance based on the common application). There may be various reasons for choosing this coding variant, such as marketing considerations. Thus, e.g. an IPX7 rating for a consumer device specifies that the device has water protection up to limited immersion, but gives deliberately no information as to whether the device has any protection against mechanical ingress or dust. In the case of an IPX7 rating, however, a considerable level of protection against the ingress of solids can be assumed, as where a liquid ingress protection rating equals 7, the rating of protection against solids is rarely below 6, e.g. IP67. Among other common IP ratings using the letter X are IPX4. IP2X is frequently used on electrical items to specify the item must prevent finger access to live terminals i.e. plug sockets are IP2X.

IP69K

German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP69K rating for high-pressure, high-temperature wash-down applications. Such enclosures must not only be dust-tight (IP6X), but it must also able to withstand high-pressure and steam cleaning.

The test specifies a spray nozzle that is fed with 80 °C water at 8–10 MPa (80–100 bar) and a flow rate of 14–16 L/min. The nozzle is held 10–15 cm from the tested device at angles of 0°, 30°, 60° and 90° for 30 seconds each. The test device sits on a turntable that rotates once every 12 seconds (5 rpm).

The IP69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump trucks, cement mixers, etc.), but it also finds use in other areas (for example, food industry, and car wash centers).

NEMA rating

IP Code	Min. NEMA Enclosure rating to satisfy IP Code
IP20	1
IP54	3
IP66	4, 4X
IP67	6
IP68	6P

North American enclosure rating systems are defined in NEMA 250, UL 50, UL 508, and CSA C22.2 N°. 94.

See also

• EN 62262 – IK code on resistance to mechanical impacts
• MIL-STD-810
• National Electrical Manufacturers Association
• U.S. Military connector specifications for military equivalents
• Water Resistant mark on wrist watches and eye bands

External links

• IEC Home Page
• IEC Web Store (buy IEC standards online)
• USA IP ratings
• Australian IP ratings
• NEMA vs IP Rating
• IP Rating information
• IP Rating Illustrated Chart
• IP Ratings Explained
• Rugged Electronic Devices and Measurement of Ruggedness: A guide to deciphering ruggedness claims in cell phones, Smart Phones, PDAs &c (PDF), Airo Wireless.
• A demonstration of an IP test being carried out, YouTube.