Jump to content

Holyhead Breakwater

Coordinates: 53°19′30″N 4°37′48″W / 53.325°N 4.63°W / 53.325; -4.63
From Wikipedia, the free encyclopedia
(Redirected from Holyhead Harbour)

Holyhead Breakwater and Lighthouse.

Holyhead Breakwater is situated at the north-western end of Holyhead in Anglesey in Wales. The Victorian structure, which is 1.71 miles (2.75 km) long, is the longest breakwater in the United Kingdom.[1] The breakwater, which is accessible in good weather, has a promenade on top which leads out to the Holyhead Breakwater Lighthouse.[1]

Background

[edit]

In the age of sail, northerly winds in the Irish Sea could often prevent ships from Ireland entering the old harbour at Holyhead. When adverse weather conditions halted sailings from Holyhead, passengers and cargo had to be moved to Porth Dafarch on the southerly side of Holy Island. The sheltered bay was used from the mid-17th into the 19th century as an alternative to the main port.[2] The customs post,[3] dating from 1819, can still be seen at Porth Dafarch.

The Acts of Union 1800 that united the Parliament of Great Britain with the Parliament of Ireland necessitated immediate improvements to the old harbour to improve the links between Dublin and London. Construction included the Admiralty Pier (built 1810-24) by John Rennie and the South Pier (built 1823-31) and graving dock designed by Thomas Telford; his London-Holyhead Road, which included the Menai Suspension Bridge and Stanley Embankment, ended at Admiralty Arch on Salt Island in Holyhead. Despite transport improvements on the mainland, the old harbour remained congested with marine traffic. The heavily-used Admiralty Pier (for the mail and Packet trade) at the northern end of the old harbour (and attached to Salt Island) often took the brunt of bad weather which required frequent repairs and dredging.

By the mid 19th century railway mania had created a transport revolution in Great Britain. Poor weather delaying sailings from Holyhead was no longer acceptable because of the number of passengers and cargo crossing between Ireland and Great Britain. Holyhead needed a large area of calm water with safe anchorages for the number of vessels now using the port. In 1847, the New Harbour was authorised by a Private Act of Parliament which would allow more than 400 acres (160 ha) of deep water to be enclosed by a stone breakwater in order to create a sheltered roadstead in addition to Holyhead's pre-existing 276 acres (112 ha) old harbour.[4] With the opening of the Chester and Holyhead Railway in August 1848 on Anglesey, there was an immediate imperative to begin construction.

Construction

[edit]
Remains of the breakwater railway.

In January 1848 work began under the auspices of superintendent engineer J.M.Rendel.[1][4] Following his death in 1856, the project was completed by John Hawkshaw.[4] Shaped 10-tonne blocks of limestone were used to create an outer facing wall, thereby encasing a rubble mound raised from the sea both by dumping from ships and tipping from the shore.[5] Divers in submarine bells created the level foundations on which the tiers of facing stones were placed.[6] These men worked underwater using picks and hammers, and carried out blasting using gunpowder sealed in watertight tin pipes.[6] Up to 1,300 men were employed during the work; 40 died during construction.[7]

A broad gauge railway was used to carry more than seven million tonnes of stone from the quarries on Holyhead Mountain to the working areas.[1] The line eventually reached 1.48 mi (2.38 km) in length. In 1913 it was finally converted to standard gauge when a new engine was required, as the mid-1800s original had worn out.[8] A locomotive with a plate inscribed "J. & C. Rigby, Holyhead Harbour Works, 1861" worked on the 7 ft 0¼ in Ponta Delgada harbour railway until 1973.[9][10][11] After a further transition to diesel traction (using the British Rail Class 01, the lightest standard-gauge shunters ever used on the British railways), the line continued in service for breakwater maintenance purposes until the 1980s when it finally ceased operations and maintenance duties were taken over by various road and all-terrain vehicles.[12]

The breakwater, which took 28 years to complete, was officially opened on 19 August 1873 by Albert Edward, Prince of Wales.[1]

Since November 2014, concrete blocks have been placed at the entrance to block traffic. However, the breakwater is still accessible to walkers.

[edit]

References

[edit]
  1. ^ a b c d e Denton, A., & Leach, N. (2008). Lighthouses of Wales. Landmark Publishing Ltd. ISBN 978-1-84306-459-6.{{cite book}}: CS1 maint: multiple names: authors list (link)
  2. ^ Ayres, George (2011). History of the Mail Routes to Ireland Until 1850. Lulu.com. p. 84. ISBN 978-1-4466-0504-2.
  3. ^ "Old Customs Post, Trearddur, Isle of Anglesey".
  4. ^ a b c Cragg, Roger (1997). Civil Engineering Heritage Series: Wales & West Central England. Thomas Telford. pp. 7–8. ISBN 0727725769.
  5. ^ Smith, Mick R. (1999). "Stone: Building Stone, Rock Fill and Armourstone in Construction". Geological Society Engineering Geology Special Publication. 16: 296. ISBN 1862390290.
  6. ^ a b Jamieson, Alexander (1879). Dictionary of Mechanical Science, Arts, Manufactures, and Miscellaneous Knowledge, Volume 1. H. Fisher, Son & Company. p. 103.
  7. ^ Hughes, Margaret (2001). Anglesey from the Sea. Carreg Gwalch. ISBN 0-86381-698-3.
  8. ^ Jones, Geraint I.L. (2005). Anglesey Railways. Carreg Gwalch. ISBN 1-84527-006-1.
  9. ^ "Ponta Delgada and the Broad Gauge Harbour Railways". www.internationalsteam.co.uk. Retrieved 24 February 2023.
  10. ^ "Railways in Açores". www.sinfin.net. Retrieved 24 February 2023.
  11. ^ Stöckl, Fritz (1961). "The Last 7 ft. Gauge Railway in the World". Railway Magazine. pp. 468–469.
  12. ^ David Plimmer. "Holyhead Breakwater". www.2d53.co.uk. Retrieved 1 August 2018.
[edit]

53°19′30″N 4°37′48″W / 53.325°N 4.63°W / 53.325; -4.63