Jump to content

Wellington Formation

Coordinates: 38°36′N 97°12′W / 38.6°N 97.2°W / 38.6; -97.2
From Wikipedia, the free encyclopedia
(Redirected from Hollenberg Limestone)
Wellington Formation
Stratigraphic range: Early Permian(Artinskian)
~290–280 Ma
Upper Wellington Shale excavated in the Smoky Hill River diversion channel at Indian Rock Park, Salina, Kansas
Halitite (Hutchinson Salt Member, Wellington Formation).
TypeFormation
Unit ofSumner Group
Sub-unitsLower Wellington Member,
Hutchinson Salt Member,
Carlton Limestone Member,
Upper Wellington Member
UnderliesCentral-Western Kansas: (relative to the Sixth principal meridian)[1]
East: Kiowa Shale
Over: Pleistocene terraces
West: Ninnescah Shale
Northcentral Oklahoma:
Hennessey Formation
Garber Sandstone
OverliesNolans Limestone
Thickness500–700 ft (150–210 m)
Lithology
PrimaryShale/mudstone/dolomite
Salt/anhydrite/gypsum
Location
Coordinates38°36′N 97°12′W / 38.6°N 97.2°W / 38.6; -97.2
Approximate paleocoordinates3°36′N 25°48′W / 3.6°N 25.8°W / 3.6; -25.8
Region Kansas
 Oklahoma
Country United States
Type section
Named forWellington, Kansas
Named byF. W. Cragin[2]
Wellington Formation is located in the United States
Wellington Formation
Wellington Formation (the United States)
Wellington Formation is located in Kansas
Wellington Formation
Wellington Formation (Kansas)

The Wellington Formation is an Early Permian geologic formation in Kansas and Oklahoma.[2] The formation's Hutchinson Salt Member is more recognized by the community than the formation itself, and the salt is still mined in central Kansas.[3] The Wellington provides a rich record of Permian insects and its beddings provide evidence for reconstruction of tropical paleoclimates of the Icehouse Permian with the ability in cases to measure the passage of seasons.[4] Tens of thousands of insect fossil recovered from the Wellington shales are kept in major collections at the Harvard Museum of Comparative Zoology and Yale Peabody Museum of Natural History.[5]

Description

[edit]

Initially described as marine shales, the 500–700 feet (150–210 m) thick Wellington appears mostly as dark gray, thinly bedded soft rock, much of it terrestrial, with sediments from fresh water ponds and salt lakes. There are several variable beds of anhydrite and gypsum and the central body of most of the formation is a massive salt bed. Localized red beds and green shales indicate conditions of exposed soils with shallow freshwater tables. Marine fossils are limited to the lowest beds while the remainder features freshwater species and land life, particularly insects and reptiles.

Distribution

[edit]

Compared to the earlier Permian rock formations in the midcontinent, the Wellington is somewhat more restricted in range. The Wellington is identified in western Kansas, northwest Oklahoma, and the northeast corner of the Texas Panhandle, but with no identification in Nebraska[4] (compare with relative extension of the underlying Chase Group into Nebraska and Eastern Kansas). The surface outcrop lies generally along or between the north–south highways U.S. 81 and U.S. 77.[5] South of Salina into northern Oklahoma, the westward dipping Wellington lies under a broad, shallow valley; here, the upper Wellington has collapsed as the Hutchinson Salt member has dissolved, forming lowlands including the McPherson Valley Wetlands and the Wellington-McPherson Lowlands. West of this valley, the Wellington shales gradually slope deeper underground beneath the Ninnescah Shale, but the unit extends no further West than the western Kansas border.[4]

Paleoclimate

[edit]

At a time of extreme global glaciation, the location of the Wellington deposit was equatorial and glacier-free. The climate was generally arid but with cyclic variation in global temperatures and precipitation recorded by layers of windblown dust deposited in the basin.[4]

Fauna

[edit]
A life-size reconstruction of Meganeuropsis permianum with wingspan of 72 centimetres (28 in).

The habitable environment, while initially a marine embayment, was primarily non-marine, with great many cyclic variations between dry, fresh water, brackish water, and brine.

Marine (lowest shale)

[edit]

Brackish-water

[edit]

Fresh-water

[edit]

Terrestrial Insects

[edit]

Stratigraphy

[edit]

The Wellington is not particularly rigorously divided into subunits as few easily identifiable features are consistent other than the dark shale; but certain subdivisions are recognized. Broadly, the Wellington shales are divided into an upper Wellington shale member and a lower Wellington shale member. However, these informally named divisions are based only upon the position of the Hutchinson Salt Member in the general middle of the formation, which is usually but not always present.

Some limestone beds,[9] typically dolomite, are observed within these upper and lower shale divisions, variously ranked as members, and the otherwise unnamed adjoining shales may be classified with the named limestones.[10] Like the salt, each is not always recognizably present.

Upper shale

[edit]

The upper Wellington consists primarily of interbedded cycles of gray anhydritic mudrock and red mudrock, but includes limited beds of discontinuous limestone and dolomite.

Milan Limestone[11][12] is the marker bed for the top of the upper Wellington, but it is not always present, its absence visibly obscuring the contact with the overlying Ninnescah Shale. Its appearance is typically a succession of discontinuous, thin carbonate beds.[9] One outcrop is in the bank of the Chikaskia River south of Milan, Kansas, where it consists of three beds of dolomite separated by shale, all with green flecks of malachite.[13]

Three-finger dolomite is an approximate 20 foot zone containing three relatively thin dolomite beds, informally named in south-central Kansas. These beds are under study for their role in the destructive and fatal 2001 Yaggy/Hutchinson natural gas storage leak.[14] However, these beds might correspond with the Milan Limestone.

Hutchinson Salt

[edit]

Hutchinson Salt[11] consists of repeating beds of salt, anhydrite, and gray shale, totaling up to 300 feet (91 m). The unit is present in much of central Kansas and north-central Oklahoma. The member is encountered in oil and gas exploration throughout the region. The salt has been mined with both shaft mining and dissolution mining. Mining communities include Hutchinson, Lyons, Kingman, and Kanoplis.[15] Where the Hutchinson Salt is near the surface, it can be dissolved by the normal circulation of fresh groundwater. The dissolving salt results in collapse of overlying rock and the discharge of salt into surface water, degrading some freshwater sources.[16]

Lower shale

[edit]

The lower Wellington consists of interbedded cycles of gray anhydritic mudrock and anhydrite, the anhydrite and gypsum being quarried in some locations. The lower shale includes several discontinuous beds of limestone and dolostone. In some locations, these thin limestone beds are sufficiently resistant that they influence the landscape; some are even geologically mappable on the local scale. The very lowest beds of the lower Wellington are the only representation of marine environment within the Wellington Formation.

Carlton Limestone[11] is a locally ledge-forming, mappable marker bed for the lower Wellington outcrop.[17] It is associated with "Carlton Insect Beds", although a number of other insect beds are known within the upper and lower Wellington.

Hollenberg Limestone[11] is also a ledge-forming, locally mappable marker bed for the lower Wellington surface topography.[17]

Annelly gypsum is named for Annelly, Kansas, and overlies the Geuda Springs shale member. The alabaster and selenite forms of gypsum are both also present,[18] and were mined at the mineral springs resort community of Geuda Springs, Kansas. Although not an ideal building material, the Annelly alabaster that was quarried there, locally called "marble", was used in the construction of the so-called "marble block" of the historic Smith commercial building in Wellington, Kansas.[19][20][21]

Access

[edit]

As a shale, the Wellington Formation has limited exposures, but tends towards forming moderate soil-covered slopes below Kiowa Sandstone caprocks. This is aggravated by the fact that when the Wellington is close to the surface, ground water dissolves the salt, causing the upper Wellington shales to sink and become covered by river and lake muds.

Hutchinson salt mining

[edit]

Hutchinson, Kansas has been a focus of extraction of salt from the Hutchinson Salt Member. Several geological tourism opportunities occur underground within the Hutchinson salt mine in relation to the Strataca Salt Mine Museum, including overnight camping for organized groups, underground foot and bicycle races, and a special annual "Hunt for Red Rock-tober" tour where guided visitors may access and collect from the mine's tailing piles of red salt, generally considered to be a contaminated waste product.

Interstate 70: Kiowa/Wellington bluffs

[edit]

Following Interstate 70 in Northcentral Kansas, just east of Salina, travelers are guided over a scenic range of hills between the broad Saline and Solomon valleys. Here, the collapsing Hutchinson Salt Member and predominately red Ninnescah Shale are both absent and these bluffs are the result of erosion of resistant sandstones in the Kiowa overlying the relatively tough and stable shales of the upper Wellington. The result is lesser bluffs that are geologically similar to those formed by the Dakota Formation over Ninnescah Shale just west of Salina.[22]

Coronado Hill: Hutchinson Salt dissolution valley

[edit]

Coronado Hill is one of the Dakota remnant hills forming the hummocky outliers of the Smoky Hill Buttes range of the Smoky Hills. From the Coronado Heights public park atop Coronado Hill, the landforms are visible, resulting from the interaction of the resistant Dakota and Kiowa sandstones, the less resistant Ninnescah and Wellington shales, and the dissolution of the Hutchinson Salt Member.

South of Coronado Hill lies the original and present course of the Smoky Hill River. Here, flowing out of the Smoky Hills in the west, the river previously continued to the southeast, but its present course is east across the valley then turning north to Salina. This broad north–south valley is largely the result of collapsing formations as the Hutchinson Salt Member was dissolved.[23] The slopes of Coronado Hill are the Kiowa Shale, the Ninnescah Shale extends from the lower slopes to the valley floor, and the full thickness of the Wellington Formation with intact Hutchinson Salt lies beneath the Ninnescah Shale below this side of the valley floor.[22]

On the bluffs visible on the far east side of the valley, the Ninnescah Shale is completely missing and the Wellington Formation rises over 100 feet (30 m) above the bottom of the valley.[22] The Hutchinson Salt Member did not extend as far east as these bluffs, so these present bluffs are stable and beyond the eastern extent of the collapse.[23]

A head of the forming Kansas River reached south through the collapse to capture the Smoky Hill River, which is why the river today makes a 24 miles (39 km) jog to the north to the upper Kansas Valley.[23]

Indian Rock Park, Salina: Upper Wellington excavation

[edit]
Waterfall over a dolomite bed in the upper Wellington Formation in the Indian Rock diversion channel

In the late 1950s, as part of a Diversion By-pass and Flood Control project for Salina, a diversion channel was excavated through the Indian Hill prominence of the Kiowa/Wellington bluffs at the turn of the Smoky Hill River.[24] Roughly 80 feet (24 m) of upper Wellington Shale are exposed from the excavation, including a color change higher on the sides and short waterfalls over resistant layers of dolomite. Indian Rock Park includes this hill and the surrounding area with fields, cliffs, and recreational trails. Glennifer Hill Drive leads to the hilltop for parking, a panoramic city view, and trails into the diversion channel as well as to the Wellington shale exposed by the abandoned brick factory quarry now named Indian Rock Lake.[22][25][26]

Interstate 70: Russell County sinkholes

[edit]

Early oil exploration in western Kansas focused largely on the Carboniferous formations, such as the Kansas City-Lansing limestones at a depth of 3,300 feet (1.0 km).[27] The higher Permian formation is important to this exploration both as marker horizons as well as a relatively impervious protective barrier between the brines of the Permian formations and the fresh water of the surface aquifers used for domestic supplies. Particularly, this means that the thousands of oil wells in western Kansas must penetrate the Hutchinson Salt Member and other beds of soluble salt, anhydrite, and gypsum of the upper Permian rocks.[28][29][30]

During World War II, steel outer casings were recovered from completed cable-drilled wells in Russell County, but the wells were not correctly sealed. The lack of cement casing and plugging means that surface fresh water now drains down the well bores and on passing through the salt, anhydrite, and gypsum beds dissolves and carries away those minerals. This dissolution causes water-filled voids 1,300 to 1,600 feet (490 m) below the surface, still enlarging and slowly collapsing today, causing active sinkholes. As no strong formations lie above the Hutchinson Salt (only soft shale, sand, and very thin chalk) the sinking is very steady and gradual.[28][29][30]

Interstate 70 was knowingly constructed over three of these sinkholes west of Russell, Kansas. The lanes have been elevated repeatedly since construction and an adjoining overpass was removed to avoid its impending collapse. All three sinkholes hold open fresh water in wet periods. The Crawford Sinkhole is the deepest of the three and holds water continuously, becoming a local wetlands environment.[28][29][30]

See also

[edit]

References

[edit]
  1. ^ "County Geologic Maps". Kansas Geological Survey. Retrieved 2021-11-13.
  2. ^ a b "Geologic Unit: Wellington". National Geologic Database. Geolex — Significant Publications. United States Geological Survey. Retrieved 2021-10-27.
  3. ^ "Geologic Unit: Hutchinson". National Geologic Database. Geolex — Significant Publications. United States Geological Survey. Retrieved 2021-10-27.
  4. ^ a b c d Giles, Jessica M.; Soreghan, Michael J.; Benison, Kathleen; Soreghan, Gerilyn S. (September 2013). "Lakes, Loess, and Paleosols In the Permian Wellington Formation of Oklahoma, U.S.A.: Implications For Paleoclimate and Paleogeography of the Midcontinent". Journal of Sedimentary Research. Society for Sedimentary Geology. Retrieved 2021-11-13.
  5. ^ a b Beckemeyer, Roy; Hall, Joseph D (April 2007). "The entomofauna of the Lower Permian fossil insect beds of Kansas and Oklahoma, USA". African Invertebrates. 48 (1): 23–39. Retrieved 2021-10-27.
  6. ^ a b c d Paul Tasch (1964). D.F. Merriam (ed.). "Symposium on cyclic sedimentation: Periodicity in the Wellington Formation of Kansas and Oklahoma". Bulletin (169). Kansas Geological Survey: 481–495.
  7. ^ David Grimaldi, Michael S. Engel (May 16, 2005). Evolution of the Insects. Cambridge University Press. ISBN 9781107268777. Retrieved 2021-11-13.
  8. ^ J. R. Zimmerman. 1962. Taxonomic names, in The Asthenohymen-Delopterum Bed: A New Leonardian Insect Horizon in the Wellington of Kansas and Oklahoma. Journal of Paleontology 36:1319-1333
  9. ^ a b West, R. R.; Miller, K. B.; Watney, W. L. (2010). "The Permian System in Kansas". Bulletin (257). Kansas Geological Survey: Major Subdivisions, continued. The Milan Limestone Member is typically a succession of discontinuous, thin carbonate beds.
  10. ^ Giles, et al, 2015, is an example of such practice.
  11. ^ a b c d Moore, Raymond C.; Frye, John C.; Jewett, John Mark; Lee, Wallace; O'Connor, Howard G. (1951). "The Kansas Rock Column". Bulletin (89). University of Kansas Publications, State Geological Survey of Kansas. Milan limestone ... Hutchinson salt member ... fossil insect-bearing Carlton limestone ... not definitely known to be of widespread occurrence, has been named the Hollenberg limestone.
  12. ^ "Geologic Unit: Wellington". National Geologic Database. Geolex — Significant Publications. United States Geological Survey. Retrieved 2022-04-10. Milan Limestone Member of Wellington Formation of Sumner Group (KS)
  13. ^ Walter, Kenneth L. (1961). "Geology and Ground-water Resources of Sumner County, Kansas". Bulletin (151). University of Kansas Publications, State Geological Survey of Kansas: Geologic Formations in Relation to Ground Water. The Milan Dolostone member, which crops out in the bank of Chikaskia River south of Milan, forms the top of the Wellington Formation. The Milan consists of three beds of dolomitic limestone containing flakes of bright-green copper carbonate, interbedded with a few feet of grayish-green shale. In many places in Sumner County the Milan cannot be recognized; hence the contact between the Wellington Formation and the overlying Ninnescah Shale is indefinite.
  14. ^ Seismic Detection of Shallow Natural Gas Beneath Hutchinson, Kansas, 2002.
  15. ^ Robert S. Sawin and Rex C. Buchanan. "Salt in Kansas". Public Information Circular (21). Kansas Geological Survey.
  16. ^ Tony Gogel (1981). "Discharge of Saltwater from Permian Rocks to Major Stream-aquifer Systems in Central Kansas". Chemical Quality Series (9). Kansas Geological Survey. Retrieved 2021-11-07. Saline-water inflow from Permian rocks has resulted in the degradation of freshwater systems in several areas of central Kansas.
  17. ^ a b "Dickinson County". kgs.ku.edu. Kansas Geological Survey. 2020. Retrieved 2021-11-08. Identifiable surfaces of the Carlton and Hollenberg beds are indicated on the Dickinson County maps as marker beds.
  18. ^ Ver Wiebe, W.A., 1937, The Wellington formation of central Kansas: Wichita Municipal University Bulletin, v. 12, no. 5, p. 3-18. (Geolex Geologic Unit: Annelly) "Annelly gypsum member of Wellington formation. ... both selenite and alabaster varieties of gypsum are present. ... Underlies Chisolm Creek shale member (new); overlies Geuda Springs shale member ... Type locality: high cliff on west branch of Whitewater River 0.25 mi south of Annelly, in ... , Harvey Co., southeastern KS."
  19. ^ Kenneth L. Walters, U.S. Geological Survey (1961). "Geology and Ground-water Resources of Sumner County, Kansas". Bulletin (151): Geography. This gypstone is in the Wellington Formation. A quantity of gypsum is reported to have been quarried from this locality to build the "Marble block" building in Wellington.
  20. ^ Kulstad, Robert O.; Fairchild, Paul; McGregor, Duncan (1956). "Gypsum in Kansas". Bulletin (113). Kansas Geological Survey: Gypsum in the Wellington Formation. Geuda Springs deposit Rock gypsum cropped out along the banks of a small stream ... where some was obtained for the erection of a large business block in Wellington, generally known as the "marble block".
  21. ^ Walter, Kenneth L. (1961). "Geology and Ground-water Resources of Sumner County, Kansas". Bulletin (151). University of Kansas Publications, State Geological Survey of Kansas: Geography. A bed of gypsum of good quality but of undetermined thickness crops out in the SW SE sec. 27, T. 33 S., R. 2 E. ... A quantity of gypsum is reported to have been quarried from this locality to build the "Marble block" building in Wellington.
  22. ^ a b c d McCauley, James R. (2011). "Surfical Geology of Saline county, Kansas". kgs.ku.edu. Kansas Geological Survey. Retrieved 2021-11-07. See A-A' section.
  23. ^ a b c Tony Gogel (1981). "Discharge of Saltwater from Permian Rocks to Major Stream-aquifer Systems in Central Kansas". Chemical Quality Series (9). Kansas Geological Survey: Hydrologic Setting. Retrieved 2021-11-07. Figure 4. Conceptual block diagrams near Lindsborg showing geologic development, mechanism of dissolution of the Hutchinson Salt Member, and development of Wellington aquifer between Cretaceous time (A) and present (B).
  24. ^ Wright Water Engineers, Inc. "Smoky Hill River Renewal Master Plan" (PDF). Retrieved 2021-11-07.
  25. ^ Paulette, Robert Justice and Scott, Guy Robert, "Flood control measures for Salina, Kansas" (1932).Professional Degree Theses. 287.[1] Brick plant located by Indian Hill on page 132.
  26. ^ Lichti, Carol (February 25, 1996). "On Hallowed Ground : Story of Indian Rock and Lakewood". The Salina Journal. Salina, Kansas. p. 47. Retrieved December 1, 2021 – via Newspapers.com. In 1899, Salina Brick and Tile Co. and later the Salina Vitrified Brick Co. occupied the hill. The company closed in 1954. ... two acre pond ...
  27. ^ John C. Frye and James J. Brazil (1949). "Ground Water in the Oil-field Areas of Ellis and Russell Counties, Kansas". Bulletin (50). University of Kansas Publications, State Geological Survey of Kansas. The discovery well had an initial production of 818 barrels from the Kansas City-Lansing limestones at a depth of about 3,334 feet.
  28. ^ a b c Rex C. Buchanan; James R. McCauley (1987). Roadside Kansas. University Press of Kansas (Kansas Geological Survey). pp. 96–102. ISBN 978-0-7006-0322-0.
  29. ^ a b c Hansen, Terry Jay (1977). Dissolution in the Hutchinson salt member of the Wellington formation near Russell, Kansas (Thesis). Kansas State University. Retrieved 2021-11-15.
  30. ^ a b c Robert F. Walters (1991). "Gorham Oil Field, Russell County, Kansas". Bulletin (228). Kansas Geological Survey. Retrieved 2021-11-15.

Further reading

[edit]
  • E. H. Sellards. 1906. Types of Permian insects, part I - Odonata. American Journal of Science, Series 4 22(129):249-258