Jump to content

Usability testing

From Wikipedia, the free encyclopedia
(Redirected from Hallway testing)

Usability testing is a technique used in user-centered interaction design to evaluate a product by testing it on users. This can be seen as an irreplaceable usability practice, since it gives direct input on how real users use the system.[1] It is more concerned with the design intuitiveness of the product and tested with users who have no prior exposure to it. Such testing is paramount to the success of an end product as a fully functioning application that creates confusion amongst its users will not last for long.[2] This is in contrast with usability inspection methods where experts use different methods to evaluate a user interface without involving users.

Usability testing focuses on measuring a human-made product's capacity to meet its intended purposes. Examples of products that commonly benefit from usability testing are food, consumer products, websites or web applications, computer interfaces, documents, and devices. Usability testing measures the usability, or ease of use, of a specific object or set of objects, whereas general human–computer interaction studies attempt to formulate universal principles.

What it is not

[edit]

Simply gathering opinions on an object or a document is market research or qualitative research rather than usability testing. Usability testing usually involves systematic observation under controlled conditions to determine how well people can use the product.[3] However, often both qualitative research and usability testing are used in combination, to better understand users' motivations/perceptions, in addition to their actions.

Rather than showing users a rough draft and asking, "Do you understand this?", usability testing involves watching people trying to use something for its intended purpose. For example, when testing instructions for assembling a toy, the test subjects should be given the instructions and a box of parts and, rather than being asked to comment on the parts and materials, they should be asked to put the toy together. Instruction phrasing, illustration quality, and the toy's design all affect the assembly process.

Methods

[edit]

Setting up a usability test involves carefully creating a scenario, or a realistic situation, wherein the person performs a list of tasks using the product being tested while observers watch and take notes (dynamic verification). Several other test instruments such as scripted instructions, paper prototypes, and pre- and post-test questionnaires are also used to gather feedback on the product being tested (static verification). For example, to test the attachment function of an e-mail program, a scenario would describe a situation where a person needs to send an e-mail attachment, and asking them to undertake this task. The aim is to observe how people function in a realistic manner, so that developers can identify the problem areas and fix them. Techniques popularly used to gather data during a usability test include think aloud protocol, co-discovery learning and eye tracking.

Hallway testing

[edit]

Hallway testing, also known as guerrilla usability, is a quick and cheap method of usability testing in which people — such as those passing by in the hallway—are asked to try using the product or service. This can help designers identify "brick walls", problems so serious that users simply cannot advance, in the early stages of a new design. Anyone but project designers and engineers can be used (they tend to act as "expert reviewers" because they are too close to the project).

This type of testing is an example of convenience sampling and thus the results are potentially biased.

Remote usability testing

[edit]

In a scenario where usability evaluators, developers and prospective users are located in different countries and time zones, conducting a traditional lab usability evaluation creates challenges both from the cost and logistical perspectives. These concerns led to research on remote usability evaluation, with the user and the evaluators separated over space and time. Remote testing, which facilitates evaluations being done in the context of the user's other tasks and technology, can be either synchronous or asynchronous. The former involves real time one-on-one communication between the evaluator and the user, while the latter involves the evaluator and user working separately.[4] Numerous tools are available to address the needs of both these approaches.

Synchronous usability testing methodologies involve video conferencing or employ remote application sharing tools such as WebEx. WebEx and GoToMeeting are the most commonly used technologies to conduct a synchronous remote usability test.[5] However, synchronous remote testing may lack the immediacy and sense of "presence" desired to support a collaborative testing process. Moreover, managing interpersonal dynamics across cultural and linguistic barriers may require approaches sensitive to the cultures involved. Other disadvantages include having reduced control over the testing environment and the distractions and interruptions experienced by the participants in their native environment.[6] One of the newer methods developed for conducting a synchronous remote usability test is by using virtual worlds.[7]

Asynchronous methodologies include automatic collection of user's click streams, user logs of critical incidents that occur while interacting with the application and subjective feedback on the interface by users.[6] Similar to an in-lab study, an asynchronous remote usability test is task-based and the platform allows researchers to capture clicks and task times. Hence, for many large companies, this allows researchers to better understand visitors' intents when visiting a website or mobile site. Additionally, this style of user testing also provides an opportunity to segment feedback by demographic, attitudinal and behavioral type. The tests are carried out in the user's own environment (rather than labs) helping further simulate real-life scenario testing. This approach also provides a vehicle to easily solicit feedback from users in remote areas quickly and with lower organizational overheads. In recent years, conducting usability testing asynchronously has also become prevalent and allows testers to provide feedback in their free time and from the comfort of their own home.

Expert review

[edit]

Expert review is another general method of usability testing. As the name suggests, this method relies on bringing in experts with experience in the field (possibly from companies that specialize in usability testing) to evaluate the usability of a product.

A heuristic evaluation or usability audit is an evaluation of an interface by one or more human factors experts. Evaluators measure the usability, efficiency, and effectiveness of the interface based on usability principles, such as the 10 usability heuristics originally defined by Jakob Nielsen in 1994.[8]

Nielsen's usability heuristics, which have continued to evolve in response to user research and new devices, include:

  • Visibility of system status
  • Match between system and the real world
  • User control and freedom
  • Consistency and standards
  • Error prevention
  • Recognition rather than recall
  • Flexibility and efficiency of use
  • Aesthetic and minimalist design
  • Help users recognize, diagnose, and recover from errors
  • Help and documentation

Automated expert review

[edit]

Similar to expert reviews, automated expert reviews provide usability testing but through the use of programs given rules for good design and heuristics. Though an automated review might not provide as much detail and insight as reviews from people, they can be finished more quickly and consistently. The idea of creating surrogate users for usability testing is an ambitious direction for the artificial intelligence community.

A/B testing

[edit]

In web development and marketing, A/B testing or split testing is an experimental approach to web design (especially user experience design), which aims to identify changes to web pages that increase or maximize an outcome of interest (e.g., click-through rate for a banner advertisement). As the name implies, two versions (A and B) are compared, which are identical except for one variation that might impact a user's behavior. Version A might be the one currently used, while version B is modified in some respect. For instance, on an e-commerce website the purchase funnel is typically a good candidate for A/B testing, as even marginal improvements in drop-off rates can represent a significant gain in sales. Significant improvements can be seen through testing elements like copy text, layouts, images and colors.

Multivariate testing or bucket testing is similar to A/B testing but tests more than two versions at the same time.

Number of participants

[edit]

In the early 1990s, Jakob Nielsen, at that time a researcher at Sun Microsystems, popularized the concept of using numerous small usability tests—typically with only five participants each—at various stages of the development process. His argument is that, once it is found that two or three people are totally confused by the home page, little is gained by watching more people suffer through the same flawed design. "Elaborate usability tests are a waste of resources. The best results come from testing no more than five users and running as many small tests as you can afford."[9]

The claim of "Five users is enough" was later described by a mathematical model[10] which states for the proportion of uncovered problems U

where p is the probability of one subject identifying a specific problem and n the number of subjects (or test sessions). This model shows up as an asymptotic graph towards the number of real existing problems (see figure below).

In later research Nielsen's claim has been questioned using both empirical evidence[11] and more advanced mathematical models.[12] Two key challenges to this assertion are:

  1. Since usability is related to the specific set of users, such a small sample size is unlikely to be representative of the total population so the data from such a small sample is more likely to reflect the sample group than the population they may represent
  2. Not every usability problem is equally easy-to-detect. Intractable problems happen to decelerate the overall process. Under these circumstances, the progress of the process is much shallower than predicted by the Nielsen/Landauer formula.[13]

It is worth noting that Nielsen does not advocate stopping after a single test with five users; his point is that testing with five users, fixing the problems they uncover, and then testing the revised site with five different users is a better use of limited resources than running a single usability test with 10 users. In practice, the tests are run once or twice per week during the entire development cycle, using three to five test subjects per round, and with the results delivered within 24 hours to the designers. The number of users actually tested over the course of the project can thus easily reach 50 to 100 people. Research shows that user testing conducted by organisations most commonly involves the recruitment of 5-10 participants.[14]

In the early stage, when users are most likely to immediately encounter problems that stop them in their tracks, almost anyone of normal intelligence can be used as a test subject. In stage two, testers will recruit test subjects across a broad spectrum of abilities. For example, in one study, experienced users showed no problem using any design, from the first to the last, while naive users and self-identified power users both failed repeatedly.[15] Later on, as the design smooths out, users should be recruited from the target population.

When the method is applied to a sufficient number of people over the course of a project, the objections raised above become addressed: The sample size ceases to be small and usability problems that arise with only occasional users are found. The value of the method lies in the fact that specific design problems, once encountered, are never seen again because they are immediately eliminated, while the parts that appear successful are tested over and over. While it's true that the initial problems in the design may be tested by only five users, when the method is properly applied, the parts of the design that worked in that initial test will go on to be tested by 50 to 100 people.

Example

[edit]

A 1982 Apple Computer manual for developers advised on usability testing:[16]

  1. "Select the target audience. Begin your human interface design by identifying your target audience. Are you writing for businesspeople or children?"
  2. Determine how much target users know about Apple computers, and the subject matter of the software.
  3. Steps 1 and 2 permit designing the user interface to suit the target audience's needs. Tax-preparation software written for accountants might assume that its users know nothing about computers but are experts on the tax code, while such software written for consumers might assume that its users know nothing about taxes but are familiar with the basics of Apple computers.

Apple advised developers, "You should begin testing as soon as possible, using drafted friends, relatives, and new employees":[16]

Our testing method is as follows. We set up a room with five to six computer systems. We schedule two to three groups of five to six users at a time to try out the systems (often without their knowing that it is the software rather than the system that we are testing). We have two of the designers in the room. Any fewer, and they miss a lot of what is going on. Any more and the users feel as though there is always someone breathing down their necks.

Designers must watch people use the program in person, because[16]

Ninety-five percent of the stumbling blocks are found by watching the body language of the users. Watch for squinting eyes, hunched shoulders, shaking heads, and deep, heart-felt sighs. When a user hits a snag, he will assume it is "on account of he is not too bright": he will not report it; he will hide it ... Do not make assumptions about why a user became confused. Ask him. You will often be surprised to learn what the user thought the program was doing at the time he got lost.

Education

[edit]

Usability testing has been a formal subject of academic instruction in different disciplines.[17] Usability testing is important to composition studies and online writing instruction (OWI).[18] Scholar Collin Bjork argues that usability testing is "necessary but insufficient for developing effective OWI, unless it is also coupled with the theories of digital rhetoric."[19]

Survey research

[edit]

Survey products include paper and digital surveys, forms, and instruments that can be completed or used by the survey respondent alone or with a data collector. Usability testing is most often done in web surveys and focuses on how people interact with survey, such as navigating the survey, entering survey responses, and finding help information. Usability testing complements traditional survey pretesting methods such as cognitive pretesting (how people understand the products), pilot testing (how will the survey procedures work), and expert review by a subject matter expert in survey methodology.[20]

In translated survey products, usability testing has shown that "cultural fitness" must be considered in the sentence and word levels and in the designs for data entry and navigation,[21] and that presenting translation and visual cues of common functionalities (tabs, hyperlinks, drop-down menus, and URLs) help to improve the user experience.[22]

See also

[edit]

References

[edit]
  1. ^ Nielsen, J. (1994). Usability Engineering, Academic Press Inc, p 165
  2. ^ Mejs, Monika (2019-06-27). "Usability Testing: the Key to Design Validation". Mood Up team - software house. Retrieved 2019-09-11.
  3. ^ Dennis G. Jerz (July 19, 2000). "Usability Testing: What Is It?". Jerz's Literacy Weblog. Retrieved June 29, 2016.
  4. ^ Andreasen, Morten Sieker; Nielsen, Henrik Villemann; Schrøder, Simon Ormholt; Stage, Jan (2007). "What happened to remote usability testing?". Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. p. 1405. doi:10.1145/1240624.1240838. ISBN 978-1-59593-593-9. S2CID 12388042.
  5. ^ Dabney Gough; Holly Phillips (2003-06-09). "Remote Online Usability Testing: Why, How, and When to Use It". Archived from the original on December 15, 2005.
  6. ^ a b Dray, Susan; Siegel, David (March 2004). "Remote possibilities?: international usability testing at a distance". Interactions. 11 (2): 10–17. doi:10.1145/971258.971264. S2CID 682010.
  7. ^ Chalil Madathil, Kapil; Greenstein, Joel S. (2011). "Synchronous remote usability testing". Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. pp. 2225–2234. doi:10.1145/1978942.1979267. ISBN 978-1-4503-0228-9. S2CID 14077658.
  8. ^ "Heuristic Evaluation". Usability First. Retrieved April 9, 2013.
  9. ^ "Usability Testing with 5 Users (Jakob Nielsen's Alertbox)". useit.com. 2000-03-13.; references Nielsen, Jakob; Landauer, Thomas K. (1993). "A mathematical model of the finding of usability problems". Proceedings of the SIGCHI conference on Human factors in computing systems. pp. 206–213. doi:10.1145/169059.169166. ISBN 978-0-89791-575-5. S2CID 207177537.
  10. ^ Virzi, R. A. (1992). "Refining the Test Phase of Usability Evaluation: How Many Subjects is Enough?". Human Factors. 34 (4): 457–468. doi:10.1177/001872089203400407. S2CID 59748299.
  11. ^ Spool, Jared; Schroeder, Will (2001). Testing web sites: five users is nowhere near enough. CHI '01 extended abstracts on Human factors in computing systems. p. 285. doi:10.1145/634067.634236. S2CID 8038786.
  12. ^ Caulton, D. A. (2001). "Relaxing the homogeneity assumption in usability testing". Behaviour & Information Technology. 20 (1): 1–7. doi:10.1080/01449290010020648. S2CID 62751921.
  13. ^ Schmettow, Martin (1 September 2008). "Heterogeneity in the Usability Evaluation Process". Electronic Workshops in Computing. doi:10.14236/ewic/HCI2008.9. {{cite journal}}: Cite journal requires |journal= (help)
  14. ^ "Results of the 2020 User Testing Industry Report". www.userfountain.com. Retrieved 2020-06-04.
  15. ^ Bruce Tognazzini. "Maximizing Windows".
  16. ^ a b c Meyers, Joe; Tognazzini, Bruce (1982). Apple IIe Design Guidelines (PDF). Apple Computer. pp. 11–13, 15.
  17. ^ Breuch, Lee-Ann M. Kastman; Zachry, Mark; Spinuzzi, Clay (April 2001). "Usability Instruction in Technical Communication Programs: New Directions in Curriculum Development". Journal of Business and Technical Communication. 15 (2): 223–240. doi:10.1177/105065190101500204. S2CID 61365767.
  18. ^ Miller-Cochran, Susan K.; Rodrigo, Rochelle L. (January 2006). "Determining effective distance learning designs through usability testing". Computers and Composition. 23 (1): 91–107. doi:10.1016/j.compcom.2005.12.002.
  19. ^ Bjork, Collin (September 2018). "Integrating Usability Testing with Digital Rhetoric in OWI". Computers and Composition. 49: 4–13. doi:10.1016/j.compcom.2018.05.009. S2CID 196160668.
  20. ^ Geisen, Emily; Bergstrom, Jennifer Romano (2017). Usability Testing for Survey Research. Cambridge: Elsevier MK Morgan Kaufmann Publishers. ISBN 978-0-12-803656-3.
  21. ^ Wang, Lin; Sha, Mandy (2017-06-01). "Cultural Fitness in the Usability of U.S. Census Internet Survey in Chinese Language". Survey Practice. 10 (3). doi:10.29115/SP-2017-0018.
  22. ^ Sha, Mandy; Hsieh, Y. Patrick; Goerman, Patricia L. (2018-07-25). "Translation and visual cues: Towards creating a road map for limited English speakers to access translated Internet surveys in the United States". Translation & Interpreting. 10 (2): 142–158. ISSN 1836-9324.
[edit]