Jump to content

Sharp (music)

From Wikipedia, the free encyclopedia
(Redirected from Half-sharp)
Sharp (music)
In UnicodeU+266F MUSIC SHARP SIGN (♯)
Different from
Different fromU+0023 # NUMBER SIGN
U+2317 VIEWDATA SQUARE
U+22D5 EQUAL AND PARALLEL TO
U+4E95 CJK UNIFIED IDEOGRAPH-4E95 (Jingtian)
Related
See alsoU+266D MUSIC FLAT SIGN

In music, sharp – eqv. dièse (from French) or diesis (from Greek δίεσις)[a] – means higher in pitch. The sharp symbol, , indicates that the note to which the symbol is applied is played one semitone higher. The opposite of sharp is flat, indicating a lowering of pitch. The symbol derives from a square form of the letter b (see History of notation of accidentals for more information).

Examples

[edit]

The sharp symbol is used in key signatures or as an accidental applied to a single note. The staff below has a key signature with three sharps (A major or its relative minor, F minor). The sharp symbol placed on the note indicates that it is an A instead of an A.

 {
\omit Score.TimeSignature \relative c'' { \key a \major ais1 } }

In twelve-tone equal temperament tuning (the predominant system of tuning in Western music), raising a note's pitch by a semitone results in a note that is enharmonically equivalent to the adjacent named note. In this system, A and B are considered to be equivalent. However, in the majority of tuning systems, this is not the case.

Key signature

[edit]
{ \omit Score.TimeSignature { \key cis \major s16^"" } }
The standard order in which sharps occur in a key signature is "F♯ C♯ G♯ D♯ A♯ E♯ B♯", with a maximum of 7.

In a key signature, sharps or flats are placed to the right of the clef. The pitches indicated apply in every octave.

Number

of sharps

Major key Sharp notes Minor key
0 C major A minor
1 G major F E minor
2 D major F, C B minor
3 A major F, C, G F minor
4 E major F, C, G, D C minor
5 B major F, C, G, D, A G minor
6 F major F, C, G, D, A, E D minor
7 C major F, C, G, D, A, E, B A minor

The order of sharps in key signature notation is F, C, G, D, A, E, B. Starting with no sharps or flats (C major), adding the first sharp (F) indicates G major, adding the next (C) indicates D major, and so on through the circle of fifths.

Some keys (such as C major with seven sharps) may be written as an enharmonically equivalent key (D major with five flats in this case). In rare cases, the sharp keys may be extended further, GDAEBFdouble sharpCdouble sharp, requiring double sharps in the key signature: Fdouble sharp, Cdouble sharp, Gdouble sharp, Ddouble sharp, Adouble sharp, Edouble sharp, Bdouble sharp. These are called theoretical key signatures. This principle applies similarly to the flat keys.

Temporary accidental

[edit]

When used as a temporary accidental sign, they apply to the note on which they are placed, and to all subsequent similar notes in the same measure and octave. the sharp symbol is placed to the left of the note head.

 { \omit Score.TimeSignature \relative c'' { bis1 } }

Temporary accidentals apply to the note on which they are placed, and to subsequent similar notes in the same measure. In modern notation they do not apply to notes in other octaves or measure, but this was not always the convention. If a sharp is used as an accidental, it can be cancelled on a subsequent similar note in the measure by using a flat () or a natural ().

{ \omit Score.TimeSignature \key c \major \time 2/4 bis' bes' bis' b'}

Variants

[edit]

A double sharp (double sharp) is indicated by the symbol double sharp and raises a note by two chromatic semitones.

 { \omit Score.TimeSignature \relative c'' { bisis1 } }

Historically, a double sharp was sometimes written , or .[1]

Less often (in microtonal music notation, for example) other types of sharps may be used: A half sharp, or demisharp, or quarter tone (half sharp) raises a note by approximately a quarter tone = 50 cents (Play), and may be marked with various symbols, often including half sharp, sometimes ++ instead. A sharp-and-a-half, three-quarter-tone sharp, or sesquisharp, raises a note by three quarter tones = 150 cents (Play) and may be denoted three quarter sharp.

{
\omit Score.TimeSignature \relative c'' { dih1 eisih } }

Although very uncommon, a triple sharp (triple sharp or double sharp) can sometimes be found. It raises a note by three semitones or one whole tone and one semitone.[2][3]

 {
\omit Score.TimeSignature \relative c'' {
  \tweak Accidental.stencil #ly:text-interface::print \tweak Accidental.text \markup { \concat { \sharp \doublesharp }} bis1
} }

Strictly speaking, there are many other variants that can appear.

When used as a temporary accidental sign, they apply to the note on which they are placed, and to all subsequent similar notes in the same staff, measure and octave.

Shape

[edit]

The sharp symbol () resembles the number (hash) sign (#), in that both have two intersecting sets of parallel double lines. While the number sign may have a pair of horizontal lines, the sharp sign has a pair of slanted lines that rise from left to right instead, to avoid obscuring the staff lines. The other set of parallel lines are vertical in the sharp sign, while the number sign (#) may have slanted lines instead.[citation needed] It is also etymologically independent from the number sign.

Likewise, while the double-sharp sign double sharp resembles a bold-face lower-case x it needs to be typographically distinct.

Unicode

[edit]

In Unicode, assigned sharp signs are as follows:

  • U+266F MUSIC SHARP SIGN (♯)
  • U+1D12A 𝄪 MUSICAL SYMBOL DOUBLE SHARP
  • U+1D130 𝄰 MUSICAL SYMBOL SHARP UP
  • U+1D131 𝄱 MUSICAL SYMBOL SHARP DOWN
  • U+1D132 𝄲 MUSICAL SYMBOL QUARTER TONE SHARP

Other notation and usage

[edit]
  • Historically, lowering a double sharp to a single sharp could be notated using a natural and sharp sign (♮♯) or vice-versa (♯♮) instead of the conventional sharp sign (♯), but the natural sign is often omitted in modern notation. The similar principle of the natural sign notation can apply when canceling a triple sharp or beyond.[4] The combination can be also written when changing a flat to a sharp.[5]
 { \omit Score.TimeSignature \relative c'' { 
  bisis2 bis \accidentalStyle modern bisis2 bis } }
  • To allow extended just intonation, composer Ben Johnston uses a sharp to indicate a note is raised 70.6 cents (ratio 25:24).[6]
  • In environments where the double sharp symbol is not supported, or in specific text notation, a double sharp is sometimes written using two single sharp signs () or a lower-case letter x. Likewise, a triple sharp can be written as .

See also

[edit]

Notes

[edit]
  1. ^ For the etymology of the words dièse, diesis, and δίεσις, see diesis.

References

[edit]
  1. ^ Chisholm, Hugh, ed. (1911). "Musical Notation" . Encyclopædia Britannica. Vol. 19 (11th ed.). Cambridge University Press. p. 87.
  2. ^ Ayrton, William (1827). The Harmonicon. Vol. V. Samuel Leigh. p. 47. ISBN 1276309457.
  3. ^ Byrd, Donald (2018). "Extremes of conventional music notation" (academic pers. page). Bloomington, IN: University of Indiana.
  4. ^ Max Reger: Clarinet Sonata No.2 (Complete Score), pp. 33.: Scores at the International Music Score Library Project
  5. ^ Chopin: Études No. 9, Op.10 (C.F. Peters), pp. 429.: Scores at the International Music Score Library Project
  6. ^ Fonville, J. (Summer 1991). "Ben Johnston's extended just intonation – a guide for interpreters". Perspectives of New Music. 29 (2): 106–137, esp. 109. doi:10.2307/833435. JSTOR 833435. ... the 25/ 24  ratio is the sharp () ratio ... this raises a note approximately 70.6 cents.