File:Glass O-ring joints.PNG

No higher resolution available.

Glass_O-ring_joints.PNG (350 × 120 pixels, file size: 4 KB, MIME type: image/png)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Drawing of glass O-ring joints used for making laboratory glassware. Both sides of the joint are essentially equivalent. By putting them together in the direction of the arrows with an appropriately-sized O-ring placed in between in circular grooves on each joint (not shown on the joint on the left side for simplicity), they can be joined. They should be held together by a clamp. The O-ring can maintain a leak-tight seal between the joints.

This chemistry image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}.

It is recommended to name the SVG file “Glass O-ring joints.svg”—then the template Vector version available (or Vva) does not need the new image name parameter.

H Padleckas created this image file in April-May 2006 especially for use in the article "Laboratory glassware" in Wikimedia. H Padleckas 13:55, 27 May 2006 (UTC)

Licensing

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.

	This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.

	You are free: to share – to copy, distribute and transmit the work to remix – to adapt the work Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
	This licensing tag was added to this file as part of the GFDL licensing update.CC BY-SA 3.0truetrue