Jump to content

Dynamic device mapping

From Wikipedia, the free encyclopedia
(Redirected from Dynamic Device Mapping)
Full Device Mapping

Dynamic device mapping is a technology for USB KVM switches which is sometimes implemented as an alternative to standard USB keyboard and mouse emulation.

Design

[edit]

With DDM (Dynamic Device Mapping) Technology, the communication between shared peripherals and all connected systems are maintained 100% of the time, even as a user switches between the KVM ports. This makes generic device emulation unnecessary as the DDM allows each connected computer system to believe all connected I/O devices are remaining connected even as the KVM switch might move to another port.

KVM device emulation

[edit]

Many USB KVM devices provide peripheral emulation, sending signals to the computers that are not currently selected to simulate a keyboard, mouse and monitor being connected. The emulation is used to avoid problems with machines which may reboot in unattended operation. Peripheral emulation services embedded in the hardware also provides continuous support where computers require constant communication with the peripherals. In addition, some types of computer systems do not treat USB devices as hot-pluggable, which means the keyboard and mouse will not be re-detected when switching back to a particular KVM port. For these types of systems, it is necessary to implement device emulation.

Standard device emulation has its limitations. When emulating a USB keyboard, mouse, and monitor it is impossible for most KVM's to simulate various types of I/O devices specifically. As a result, KVM switches will sometimes offer inconsistent performance and even sometimes unsolved compatibility issues with the shared keyboard, mouse, and other devices. The intent of Dynamic Device Mapping is to resolve the issues that standard device mapping sometimes faces.

Applications for USB DDM

[edit]

See also

[edit]

References

[edit]
[edit]