Jump to content

Ruxandra Botez

From Wikipedia, the free encyclopedia
(Redirected from Draft:Ruxandra Botez)
Ruxandra Mihaela Botez
Born
NationalityRomanian Canadian
Known forAircraft Design Modeling, Simulation and Control
Scientific career
InstitutionsIndustria Aeronautică Română; Bombardier Inc.; École de technologie supérieure
Notes

Ruxandra Mihaela Botez is an aerospace design engineer, specializing in aircraft modeling and simulation. She holds a Canada Research Chair in the Systems Engineering Department of the École de technologie supérieure [ETS] in Quebec.[1]

Education

[edit]

Botez was born in Bucharest, Romania to Mihai Ioan Botez and Alexandrina Oprescu.[citation needed]

In 1984, she graduated from Politehnica University of Bucharest as an aerospace design engineer. She worked at the Industria Aeronautică Română (IAR) until 1987 when she emigrated to Canada, where she later received a Master's degree in aerospace engineering at the École Polytechnique de Montréal and a PhD in mechanical engineering at McGill University in 1994. Following this, she worked as a postdoctoral researcher until 1995 at Auburn University in the United States.[citation needed]

She worked at Bombardier Aviation before joining ETS as a professor in 1998.[citation needed]

Research and teaching

[edit]

In 2003, she founded the Laboratory of Applied Research in Active Controls, Avionics and AeroServoElasticity (LARCASE).[2] She led three projects that were initiated and funded by the Consortium for Research and Innovation in Aerospace in Québec (CRIAQ), the Natural Sciences and Engineering Research Council, and industrial partners. These projects were realized with Bell Textron (on the Bell-427 helicopter Level D simulator certification)[3] and with Bombardier Aviation and Thales (on morphing wings)[4]

From 2009 to 2019, she worked in collaboration with CMC Electronics on projects on the conception of new methodologies for aircraft trajectory optimizations for fuel reduction applied to the Flight management system (FMS).[5][6][7][8][9]

As of 2021, she is editor-in-chief of the bulletin of the Romanian National Institute for Aerospace Research (INCAS).[10] Her published work focuses on wing and controller design.[11]

References

[edit]
  1. ^ "Canada Research Chairs - Chairholders". 2012-11-29. Retrieved 6 January 2013.
  2. ^ Botez, Ruxandra M. (2018). "Morphing Wing, UAV and Aircraft Multidisciplinary Studies at the Laboratory of Applied Research in Active Controls, Avionics and AeroServoElasticity LARCASE". AerospaceLab Journal (14). doi:10.12762/2018.AL14-02. Retrieved September 1, 2018.
  3. ^ Nadeau-Beaulieu, Michel & Botez, Ruxandra M. (2008). "Simulation and Prediction of Main Rotor, Tail Rotor, and Engine Parameters from Flight Tests". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 222 (6): 817–834. doi:10.1243/09544100JAERO313. S2CID 110646196. Retrieved September 12, 2008.
  4. ^ Botez, Ruxandra M.; Koreanschi, Andreea; Sugar-Gabor, Oliviu; Mebarki, Youssef; Mamou, Mahmood; Tondji, Yvan; Guezguez, Mohamed; Tchatchueng, Joel M.; Grigorie, Lucian T.; Sandu, Dragos; Amoroso, Francesco; Pecora, Rosario; Lecce, Leonardo; Amendola, GianLuca; Dimino, Ignatzio & Concilio, Antonio (2018). "Numerical and Experimental Transition Results Evaluation for a Morphing Wing and Aileron System". The Aeronautical Journal. 122 (1251): 747–784. doi:10.1017/aer.2018.15. S2CID 115288428. Retrieved April 12, 2018.
  5. ^ Dancila, Bogdan D.; Beulze, Benoit; Botez, Ruxandra M. (2019). "Flight Phase and Altitude-Dependent Geometrical Vertical Flight Plan Optimization Minimizing the total number of Vertical Plan Segments". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 233 (13): 4825–4838. doi:10.1177/0954410019832127. S2CID 134059155. Retrieved February 28, 2019.
  6. ^ Dancila, Radu I.; Botez, Ruxandra M. (2019). "Vertical Flight Profile Optimization for a Cruise Segment with RTA Constraints". The Aeronautical Journal. 123 (1265): 970–992. doi:10.1017/aer.2019.47. S2CID 202096421. Retrieved August 9, 2019.
  7. ^ Murrieta-Mendoza, Alejandro; Botez, Ruxandra M.; Bunel, Audric (2018). "Four-Dimensional Aircraft En-Route Optimization Algorithm using the Artificial Bee Colony". Journal of Aerospace Information Systems. 15 (6): 307–334. doi:10.2514/1.I010523. S2CID 115673132. Retrieved August 29, 2018.
  8. ^ Murrieta-Mendoza, Alejandro; Botez, Ruxandra M. (2020) [1st pub. 2020]. "Chapter 2: Commercial Aircraft Trajectory Optimization to Reduce Flight Costs and Pollution: Metaheuristic Algorithms". In Vucinic, Dean; Leta, Fabiana R.; Janardhanan, Sheeja (eds.). Advances in Visualization and Optimization Techniques for Multidisciplinary Research: Trends in Modelling and Simulations for Engineering Applications (Lecture Notes in Mechanical Engineering). Springer Singapore. pp. 33–62. ISBN 978-9-811-39805-6.
  9. ^ Murrieta-Mendoza, Alejandro; Botez, Ruxandra M.; Ruiz, Hugo; Kessaci, Sonya (2020). "Particle Swarm Optimization with Required Time of Arrival Constraint for Aircraft Trajectory". SAE International Journal of Aerospace. 13 (2): 269–291. doi:10.4271/01-13-02-0020. S2CID 230628963. Retrieved November 11, 2020.
  10. ^ "Editorial Board". Retrieved 1 August 2021.
  11. ^ "Ruxandra Mihaela Botez". scholar.google.ca. Retrieved 2022-01-06.