Jump to content

Cyclonic flow meter

From Wikipedia, the free encyclopedia
(Redirected from Draft:Cyclonic Flow Meter)
First model of a Cyclonic Flow Meter
Cyclonic Flow Meter Curve

A Cyclonic Flow Meter is a meter designed to measure the flow rate of a fluid (or gas) within a cylindrical chamber without a differential pressure directly across the rotating member, and without the use of any bearing (such as in a Turbine meter or Paddle wheel). The ring rotates in a "dead end" of the fluid flow, at the tip of the swirling cyclone.[1][2][3]

Bypass configuration: A small Cyclonic Flow Meter can be assembled in a "by-pass" configuration across an orifice plate and calibrated as a single unit to obtain high flow rates.

Cyclonic flow meter assembled in "Bypass" configuration and calibrated as a single unit.

References

[edit]
  1. ^ Instrument Society of America, ISA/95 New Orleans, ISA/96 Chicago show exhibitor. First model Cyclonic Flow Meter demonstrated in operation.
  2. ^ US patents 5606135, 5905200
  3. ^ InTech Magazine Volume 43 1996, p 206