Jump to content

Capillaritron

From Wikipedia, the free encyclopedia
(Redirected from Draft:Capillaritron)

A capillaritron is a device for creating ion and atom rays.

Mechanism

[edit]
Capillaritron with tungsten capillary
Capillaritron with quartz capillary
Capillaritron with quartz capillary in operation within a vacuum chamber: On the left the glowing capillary with the plasma up to the extraction cathode and on the right behind it the bluish glowing ion beam.

The capillaritron, the basic concept of which was published in 1981, consists of a fine metal capillary through which gas flows as an anode and a concentric extraction cathode with an outlet opening. A flow of gas through the capillary is extracted when high voltage (usually a few kilovolts) is ionised by free electrons and secondary electrons, which are accelerated towards the anode (see also impact ionisation). The positively charged ions are accelerated in the electric field and form an ion beam behind the opening of the extraction cathode.[1] Due to recombination and charge exchange processes in the plasma, the beam also partly consists of uncharged atoms.[2]

The capillary usually consists of resistant materials, such as tungsten. A further development from 1992 is the quartz capillaritron. Here the capillary consists of quartz, an electrically insulating material, into which a metal wire is inserted in order to generate the anode potential.[3] The advantage lies in the simpler, more flexible and cheaper production of quartz capillaries with a predetermined inner diameter, which, unlike metal capillaries, do not have to be drilled but can be electrochemically etched or manufactured by a glassblower.[3]

As a rule, inert gas is used as operating gas, as this only undergoes a minor chemical reaction with the other materials involved. However, a capillaritron also works with hydrogen, with nitrogen or even with air.[4]

With ion beams of capillaritrons, current densities of up to 10 kiloamperes per square millimetre and beam currents of several milliamperes are achieved.[5]

Through focusing with ion optics, beams with high power density can be generated in high vacuum, which can also be used to process surfaces selectively.[6]

Applications

[edit]

Capillaritrons are commercially available.[7]

Ion and atom beams can be used to sputter surfaces over large areas, and the sputtered material can be used for thin film deposition.[8][6] Atomic beams can also be used to process insulating surfaces. When using ion beams, such surfaces would become more electrostatically charged, which slows down the ions before they hit the surface.[9]

Furthermore, the capillaritron as an atom source can be used for mass spectrometry.[10][11]

Capillaritrons are also suited for accelerator applications.[12]

Further reading

[edit]
  • John F. Mahoney, Julius Perel, A. Theodore Forrester: Capillaritron: A New, Versatile Ion Source. In: Appl. Phys. Lett. 38, 1981, S. 320–322 (doi:10.1063/1.92355).
  • Julius Perel, John F. Mahoney, Bernard Kalensher: Investigation of the Capillaritron ion source for electric propulsion, AIAA, 15th International Electric Propulsion 1981, Las Vegas, U.S.A., published online on 17 Aug 2012 (doi:10.2514/6.1981-747).
  • Julius Perel: Ion Source for Rocket Payload, 6th Quarterly Status Report, Air Force Geophysics Laboratory, Pasadena, U.S.A., August 1983
  • Roland Hanke, Helmut Knapp, Detlef Rübesame, Stephan Wege, Heinz Niedrig: A capillaritron ion source as triode system coupled with an einzel lens., In: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Volumes 59–60, Part 1, 1 July 1991, Pages 135-138 (doi:10.1016/0168-583X(91)95193-H).
  • Markus Bautsch, Patrik Varadinek, Stephan Wege, Heinz Niedrig: A Compact and Inexpensive Quartz Capillaritron Source. In: J. Vac. Sci. Tech. A. 12, Nr. 2, 1994, S. 591–593 (doi:10.1116/1.578839).

References

[edit]
  1. ^ Lyon, Philip A. (1985). Desorption Mass Spectrometry: Are SIMS and FAB the Same?. American Chemical Society. p. 127-135. ISBN 978-0-8412-0942-8.
  2. ^ Cherepin, V. T. (2020-04-28). Secondary Ion Mass Spectroscopy of Solid Surfaces. CRC Press. ISBN 978-1-4665-6373-5.
  3. ^ a b DE 4242616, Markus Bautsch, Patrick Varadinek, Stephan Wege, "Verfahren zur Herstellung von Kapillaren sowie deren Verwendung für eine Vorrichtung zum Erzeugen eines Strahls beschleunigter Ionen und/oder Atome", published 1996-06-13, issued 1992-12-14 
  4. ^ Bautsch, Markus (1993). "2.3 Ionenemission aus Kapillaren". Rastertunnelmikroskopische Untersuchungen an mit Argon zerstäubten Metallen (in German). Berlin: Verlag Köster (published 1993-12-01). pp. 14–18. ISBN 3-929937-42-5.
  5. ^ Bautsch, Markus (1993). "4 Aufbau und Eigenschaften des Quarzkapillaritrons". Rastertunnelmikroskopische Untersuchungen an mit Argon zerstäubten Metallen (in German). Berlin: Verlag Köster (published 1993-12-01). pp. 59–67. ISBN 3-929937-42-5.
  6. ^ a b Chao, Liang-Chiun; Lin, Syuan-Jhuh; Chang, Wan-Chun (2010-05-01). "Growth, characterization and effect of substrate bias on ZnO prepared by reactive capillaritron ion beam sputtering deposition". Nuclear Instruments and Methods in Physics Research B. 268 (10): 1581–1584. Bibcode:2010NIMPB.268.1581C. doi:10.1016/j.nimb.2010.03.012. ISSN 0168-583X.
  7. ^ Heine, Curt Einar (1990). Development and Optimization of Matrices for Fast Atom Bombardment and Thermally Assisted Fast Atom Bombardment Mass Spectrometry. Michigan State University. Department of Chemistry. p. 23-24.
  8. ^ "Capillaritron ion beam sputtering system and thin film production method - Patent US-2009236217-A1 - PubChem". pubchem.ncbi.nlm.nih.gov. Retrieved 2024-02-22.
  9. ^ Rose, M. E. (2007-10-31). Mass Spectrometry: Volume 8. Royal Society of Chemistry. ISBN 978-1-84755-665-3.
  10. ^ Mahoney, John F.; Goebel, Dan M.; Perel, Julius; Forrester, A. Theodore (1983-02-01). "A unique fast atom source for mass spectrometry applications". Biological Mass Spectrometry. 10 (2): 61–64. doi:10.1002/bms.1200100203. ISSN 0306-042X.
  11. ^ Faull, K. F.; Barchas, J. D.; Kenyon, C. N.; Goodley, P. C. (1983-01-01). "Particle-induced desorption mass spectrometry with a quadrupole GC/MS instrument". International Journal of Mass Spectrometry and Ion Physics. 46: 347–350. Bibcode:1983IJMSI..46..347F. doi:10.1016/0020-7381(83)80123-5. ISSN 0020-7381.
  12. ^ Bhattacharyya, R. (2009-07-04). "Indigenous Ion Sources for Material Processing". Defence Science Journal. 59 (4): 377–394. doi:10.1021/bk-1985-0291.ix002.