Jump to content

Dallara F3 cars

Add links
From Wikipedia, the free encyclopedia
(Redirected from Dallara F311)

The Dallara F3 cars are open-wheel formula racing car, designed, developed and built by Italian manufacturer Dallara, for Formula Three categories.

F305

[edit]
Dallara F305
Dallara F306
Dallara F307
CategoryFormula Three
ConstructorDallara
PredecessorDallara F304
SuccessorDallara F308
Technical specifications[1]
ChassisCarbon fibre and Kevlar composite honeycomb monocoque covered in glass fiber composite-nomex body
Suspension (front)Pushrod with mono-damper system and torsion-bar springs
Suspension (rear)Pushrod with mono-damper system and coils springs
Length4,188 mm (165 in)
Width1,825 mm (72 in) including tyres
Height950 mm (37 in)
Axle track1,580 mm (62 in) (front)
1,465 m (57,677 in) (rear)
Wheelbase2,710 mm (107 in)
EngineVarious manufacturers 2.0 L (122 cu in) DOHC inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout
TransmissionHewland FTR-200 6-speed sequential gearbox
Power~ 220–240 hp (164–179 kW)[2]
Weight550 kg (1,213 lb) including driver
FuelVarious unleaded control fuel
LubricantsVarious
BrakesBrembo Carbon brake discs, 6-piston calipers and pads
TyresVarious
Competition history
Debut2005

The Dallara F305 was built in 2005.[3] It became upgradable with aero kits, and its evolutions became known as the F306 and the F307, in 2006 and 2007, respectively.[4][5][6][7][8]

  • European F3 Dallara F306 chassis in 2007.
    European F3 Dallara F306 chassis in 2007.
  • Dallara F306-Mercedes chassis on display.
    Dallara F306-Mercedes chassis on display.
  • Stromos Artline Dallara F307 on display
    Stromos Artline Dallara F307 on display
  • Dallara F307 of Mitch Evans, used in the 2010 Australian Drivers' Championship.
    Dallara F307 of Mitch Evans, used in the 2010 Australian Drivers' Championship.

F308

[edit]
Dallara F308
Dallara F309
Dallara F310
Dallara F311
CategoryFormula Three
ConstructorDallara
Designer(s)Luca Pignacca
Andrea Toso
Jos Claes
Ferdinando Concari
PredecessorDallara F307
SuccessorDallara F312
Technical specifications[9]
ChassisCarbon fibre monocoque
Suspension (front)Pushrod with twin-damper system and torsion-bar springs
Suspension (rear)Pushrod with twin-damper system and coils springs
Length4,264 mm (168 in)
Width1,835 mm (72 in) including tyres
Height950 mm (37 in)
Axle track1,585 mm (62 in) (front)
1,535 mm (60 in) (rear)
Wheelbase2,730 mm (107 in)
EngineVarious manufacturers (Mercedes-Benz HWA, Spiess-Volkswagen, TOM's-Toyota, Spiess-Opel, Sodemo-Renault)[10] 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout
TransmissionHewland 6-speed sequential
Power217 hp (162 kW)[11]
Weight570 kg (1,257 lb) including driver
FuelVarious unleaded control fuel
LubricantsVarious
BrakesCarbon brake discs, 6-piston calipers and pads
TyresVarious OZ 9”front & 10.5”rear
Competition history
Debut2008

The Dallara F308 was built in 2008. It was used in different Formula Three racing categories and competitions between 2008 and 2011. It was later replaced and succeeded by the F312, in 2012.[12][13]

The F308 can be upgraded to either the F309, the F310, or the F311, through Dallara's annual add-on kits. These include modifications in the area of aerodynamics such as additional air deflectors or similar or improved suspension units.[14]

The F308 is a conventional Formula 3 racing car with a carbon fiber reinforced plastic monocoque, load-bearing mid-engined, and free-standing wheels. The Hewland FTR and the Pankl DGB03 gearbox are homologated for the car. It is shifted manually by means of ignition interruption and shift lever on the right side without the clutch. The front and rear wing elements, the front, and rear crash boxes, and the wheel carriers are also homologated. The bodywork can be done by the teams themselves. For example, the chimneys on the sidepods were removed from all teams in the Euroseries and the sidepods were laminated shut.[14][15][16]

F312

[edit]
Dallara F312
Dallara F313 Dallara F314
Dallara F315 Dallara F316
Antonio Giovinazzi at the 2014 Hockenheim FIA Formula 3 European Championship round
CategoryFormula Three
ConstructorDallara
Designer(s)Luca Pignacca
Andrea Toso
Jos Claes
Ferdinando Concari
PredecessorDallara F308
SuccessorDallara F317
Technical specifications[17]
ChassisCarbon fibre monocoque
Suspension (front)Pushrod with twin-damper system and torsion-bar springs
Suspension (rear)Pushrod with twin-damper system and coils springs
Length4,351 mm (171 in)
Width1,845 mm (73 in) including tyres
Height945 mm (37 in)
Wheelbase2,800 mm (110 in)
EngineVarious manufacturers (Mercedes-Benz F3 414, Volkswagen Spiess 0XY, Tomei-ThreeBond TB14F3, TOM's Toyota TAZ31, Mugen-Honda MF204D and Toda TR-F301) 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout
Transmission6-speed semi-automatic sequential gearbox
Power240 hp (179 kW)
Weight580 kg (1,279 lb) including driver
FuelVarious unleaded control fuel
LubricantsVarious
BrakesCarbon brake discs, 6-piston calipers and pads
TyresVarious
Competition history
Debut2012

The Dallara F312 proved to be one of the most popular Formula 3 Chassis ever, with over 53 of the original type having been produced.[18] Even after its successor the Dallara F317 was introduced, the F312 remained widely used, in championships such as the Euroformula Open Championship and the Japanese Formula 3 Championship.

The Dallara F312 was designed to meet the new for 2012 FIA Formula 3 regulations, which were much more restrictive compared to previous Formula 3 regulations, and led to reduced downforce levels.[19] Compared to the previous generation Dallara F308, the 312 features a higher monocoque and a lower nose-section than the outgoing model, with the front dampers and springs being placed inside the tub, a first for a Dallara F3 car, alongside a revised aerodynamic package. The car was unveiled at the Masters of Formula 3 event on the 20th of October 2011 at Circuit Zandvoort, in the Netherlands.[20]

F317

[edit]
Dallara F317
CategoryFormula Three
ConstructorDallara
Designer(s)Luca Pignacca
Andrea Toso
Ferdinando Concari
PredecessorDallara F312
SuccessorDallara 320
Technical specifications[21]
ChassisCarbon fibre monocoque
Suspension (front)Pushrod with twin-damper system and torsion-bar springs
Suspension (rear)Pushrod with twin-damper system and coils springs
Length4,351 mm (171 in)
Width1,845 mm (73 in) including tyres
Height945 mm (37 in)
Wheelbase2,800 mm (110 in)
EngineVarious manufacturers (Mercedes-Benz F3 414, Volkswagen Spiess 0XY, Tomei-ThreeBond TB14F3, TOM's Toyota TAZ31, Mugen-Honda MF204D and Toda TR-F301) 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout
Transmission6-speed semi-automatic sequential gearbox
Power240 hp (179 kW)
Weight580 kg (1,279 lb) including driver
FuelVarious unleaded control fuel
LubricantsVarious
BrakesCarbon brake discs, 6-piston calipers and pads
TyresVarious
Competition history
Debut2017

The Dallara F317 is the thirty-seventh car used by the FIA-sanctioned Formula Three championships. Although the F317 is only an aero-upgraded F312 chassis, it works as a replacement for the aging Dallara F312 chassis.[22] However, some series like the Euroformula Open Championship opted for a slightly upgraded F312 chassis instead of the F317 package to keep costs low.

References

[edit]
  1. ^ "Dallara F306 Volkswagen, 2006 [Auta5P ID:24225 EN]". auta5p.eu.
  2. ^ "DALLARA F307 (F3)". racecarsdirect.com. 20 March 2024.
  3. ^ "DALLARA F305. SUSPENSION Front 7-11 Rear DIFFERENTIAL DAMPERS 17 RIDE HEIGHT 19 AERODYNAMICS COOLING 25 - PDF Free Download". docplayer.net.
  4. ^ "2005 Dallara-Mugen F305/07 Formula 3 Grand Prix car". www.race-cars.com. 22 March 2024.
  5. ^ Engineering, Racecar (April 25, 2008). "F3 secrets".
  6. ^ "Dallara F306/7 VW". racecarsdirect.com. 12 December 2023.
  7. ^ "AUSF3: Dallara F307 tested at Adelaide". us.motorsport.com. 11 January 2008.
  8. ^ "2005 Dallara-Mugen F305/07".
  9. ^ "Dallara F312" (PDF). euroformulaopen.net.
  10. ^ "Dallara F308: race car buying guide". Motor Sport Magazine. 24 November 2021.
  11. ^ "Dallara F308 Mercedes, 2008 [Auta5P ID:24223 EN]". auta5p.eu.
  12. ^ "Dallara F308 Specification Sheet" (PDF). Retrieved 25 June 2022.
  13. ^ "Dallara F308/11". racecarsdirect.com. 12 December 2023.
  14. ^ a b "F3 Dallara F308/VW". racecarsdirect.com. 12 December 2023.
  15. ^ "2008 Dallara F308 technical and mechanical specifications". conceptcarz.com.
  16. ^ "2008 Dallara F308 News and Information, Research, and Pricing". conceptcarz.com.
  17. ^ "Dallara F312" (PDF). euroformulaopen.net.
  18. ^ "formel 3 guide - Dallara". www.formel3guide.com. Retrieved 2019-04-20.
  19. ^ Mills, Sam Tremayne and Peter (18 August 2011). "New Dallara F312 is set to feature major changes from predecessor". Autosport.com. Retrieved 2019-04-20.
  20. ^ O'Leary, Jamie. "Dallara unveils revised F3 chassis for 2012". Autosport.com. Retrieved 2019-04-20.
  21. ^ "2017 TECHNICAL REGULATIONS". fiaf3europe.com. Archived from the original on 2017-12-31. Retrieved 2017-12-30.
  22. ^ "2017 FIA F3 European Championship updates". e-performance.eu. 25 January 2017.


[edit]
Retrieved from "https://wiki.riteme.site/w/index.php?title=Dallara_F3_cars&oldid=1249390042#F308"