Jump to content

Continental Tiara series

From Wikipedia, the free encyclopedia
(Redirected from Continental Tiara)
Tiara series
Tiara 0-405 on display at the Rolls-Royce Heritage Trust Derby
Type Piston aircraft engine
Manufacturer Teledyne Continental Motors
First run 1960s
Major applications Piper PA-36 Pawnee Brave
Robin HR100
Transavia PL-12 Airtruk
Produced 1969–1975

The Continental Tiara series are a family of air-cooled, horizontally opposed aircraft engines. Designed and built by Continental Motors/TCM, the Tiara series were commercially unsuccessful, costing the company millions of dollars.[1]

Design and development

[edit]

Continental began development of the Tiara series in 1965.[2] At the time, CAE, Continental Motor's turbine engine subsidiary, had developed the T65, a small turboshaft engine which was being considered by Bell for its new Model 206 helicopter. Faced with having to fund the production tooling for the T65 in order to keep the price reasonable, or funding the Tiara series, Continental's corporate management chose to invest in the Tiaras.[2]

While the Tiara series were basically traditional boxer engines, they did have some unique features.[1] The engines had high rotational speeds, 0.5:1 gearing was used to reduce propeller speed, with the camshaft forming an extension of the propeller shaft.[1][3] The propeller shaft featured the Hydra-Torque drive to reduce the shaft's vibrations.[1] The engines were available with four, six- and eight-cylinders. All were fuel-injected, with turbocharging being optional.

The engines' fuel consumption was high, which became a disadvantage during the 1973 oil crisis era.[2] In addition, the Tiaras' performance was not significantly improved over existing engines, making it difficult for aircraft manufacturers to justify the costs of certificating their products for the engines.[2] These problems led Continental to finally discontinue the engines in 1980.[1]

Series

[edit]

Reference: Continental, Teledyne Continental Motors, TCM (US); Rolls-Royce (UK) Part 1: Introduction and O-110 through OL-300[3]

Four-cylinder

[edit]
Tiara 4-180 (O-270)
180 hp, 271 cu in capacity

Six-cylinder

[edit]
Tiara 6-260 (O-405)
260 hp, 406 cu in capacity
Tiara 6-260A
Tiara 6-285 (O-405)
285 hp, 406 cu in capacity
Tiara 6-285A
Tiara 6-320 (O-405)
300 hp, 406 cu in capacity
Tiara T6-260 (O-405)
260 hp, 406 cu in capacity, turbocharged
Tiara T6-285 (O-405)
285 hp, 406 cu in capacity, turbocharged
Tiara T6-320 (O-405)
300 hp, 406 cu in capacity, turbocharged

Eight-cylinder

[edit]
Tiara 8-380 (O-540)
380 hp, 541 cu in
Tiara T8-450 (O-540)
450 hp, 541 cu in, turbocharged

Applications

[edit]

Tiara 6

[edit]

Specifications (Tiara 6-285-A)

[edit]

Data from FAA TDC[4]

General characteristics

  • Type: 6-cylinder, horizontally opposed piston engine
  • Bore: 4.875 in (124 mm)
  • Stroke: 3.625 in (92 mm)
  • Displacement: 406 in³ (6.65 L)
  • Dry weight: 375 lb (170 kg) dry

Components

  • Fuel system: Fuel Injected
  • Fuel type: 100/100LL avgas
  • Oil system: 5 US quarts (4.7 L), wet sump
  • Cooling system: Air-cooled

Performance

See also

[edit]

Related lists

References

[edit]
  • Gunston, Bill (1999). The Development of Piston Aero Engines, 2nd Edition. Sparkford, Somerset, England, UK: Patrick Stephens, Haynes Publishing. p. 191. ISBN 0-7509-4478-1.
  • Leyes II, Richard A.; William A. Fleming (1999). The History of North American Small Gas Turbine Aircraft Engines. Washington, DC: Smithsonian Institution. p. 119. ISBN 1-56347-332-1.
  • Smith, Herschel (1986). A History of Aircraft Piston Engines. Sunflower University Press. p. 206. ISBN 0-89745-079-5.
[edit]