Sulfuric acid

"Oil of vitriol" redirects here. For sweet oil of vitriol, see Diethyl ether.

"Sulphuric acid" redirects here. For the novel by Amélie Nothomb, see Sulphuric Acid (novel).

Sulfuric acid

Space-filling model Ball-and-stick model S=O bond length = 142.2 pm, S-O bond length = 157.4 pm, O-H bond length = 97 pm
Names
IUPAC name Sulfuric acid
Other names Oil of vitriol Hydrogen sulfate
Identifiers
CAS Number	7664-93-9 Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:26836 Y
ChEMBL	ChEMBL572964 Y
ChemSpider	1086 Y
ECHA InfoCard	100.028.763
EC Number	231-639-5
E number	E513 (acidity regulators, ...)
Gmelin Reference	2122
KEGG	D05963 Y
PubChem CID	1118
RTECS number	WS5600000
UNII	O40UQP6WCF Y
UN number	1830
CompTox Dashboard (EPA)	DTXSID5029683
InChI InChI=1S/H2O4S/c1-5(2,3)4/h(H2,1,2,3,4) Y Key: QAOWNCQODCNURD-UHFFFAOYSA-N Y InChI=1/H2O4S/c1-5(2,3)4/h(H2,1,2,3,4) Key: QAOWNCQODCNURD-UHFFFAOYAC
SMILES OS(=O)(=O)O
Properties
Chemical formula	H2SO4, sometimes expressed (HO)2SO2
Molar mass	98.079 g/mol
Appearance	Colorless viscous liquid
Odor	Odorless
Density	1.8302 g/cm3, liquid
Melting point	10.31 °C (50.56 °F; 283.46 K)
Boiling point	337 °C (639 °F; 610 K) When sulfuric acid is above 300 °C (572 °F; 573 K), it gradually decomposes to SO3 + H2O
Solubility in water	miscible, exothermic
Vapor pressure	0.001 mmHg (20 °C)
Acidity (pKa)	pKa1 = −2.8 pKa2 = 1.99
Conjugate base	Bisulfate
Viscosity	26.7 cP (20 °C)
Structure
Crystal structure	monoclinic
Space group	C2/c
Lattice constant	a = 818.1(2) pm, b = 469.60(10) pm, c = 856.3(2) pm α = 90°, β = 111.39(3) °, γ = 90°
Formula units (Z)	4
Thermochemistry
Std molar entropy (S⦵298)	157 J/(mol·K)
Std enthalpy of formation (ΔfH⦵298)	−814 kJ/mol
Hazards
GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H314
Precautionary statements	P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, P501
NFPA 704 (fire diamond)	3 0 2 W OX
Flash point	Non-flammable
Threshold limit value (TLV)	15 mg/m3 (IDLH), 1 mg/m3 (TWA), 2 mg/m3 (STEL)
Lethal dose or concentration (LD, LC):
LD50 (median dose)	2140 mg/kg (rat, oral)
LC50 (median concentration)	50 mg/m3 (guinea pig, 8 hr) 510 mg/m3 (rat, 2 hr) 320 mg/m3 (mouse, 2 hr) 18 mg/m3 (guinea pig)
LCLo (lowest published)	87 mg/m3 (guinea pig, 2.75 hr)
NIOSH (US health exposure limits):
PEL (Permissible)	TWA 1 mg/m3
REL (Recommended)	TWA 1 mg/m3
IDLH (Immediate danger)	15 mg/m3
Safety data sheet (SDS)	External SDS
Related compounds
Related strong acids	Selenic acid Hydrochloric acid Nitric acid Perchloric acid Fluoroantimonic acid Chromic acid
Related compounds	Sulfurous acid Peroxymonosulfuric acid Sulfur trioxide Oleum
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). N verify (what is YN ?) Infobox references

Sulfuric acid (American spelling and the preferred IUPAC name) or sulphuric acid (Commonwealth spelling), known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen, and hydrogen, with the molecular formula H₂SO₄. It is a colorless, odorless, and viscous liquid that is soluble with water.

Structure of sulfuric acid

Pure sulfuric acid does not occur naturally due to its strong affinity to water vapor; it is hygroscopic and readily absorbs water vapor from the air. Concentrated sulfuric acid is a strong oxidant with powerful dehydrating properties, making it highly corrosive towards other materials, from rocks to metals. Phosphorus pentoxide is a notable exception in that it is not dehydrated by sulfuric acid but, to the contrary, dehydrates sulfuric acid to sulfur trioxide. Upon addition of sulfuric acid to water, a considerable amount of heat is released; thus, the reverse procedure of adding water to the acid is generally avoided since the heat released may boil the solution, spraying droplets of hot acid during the process. Upon contact with body tissue, sulfuric acid can cause severe acidic chemical burns and secondary thermal burns due to dehydration. Dilute sulfuric acid is substantially less hazardous without the oxidative and dehydrating properties; though, it is handled with care for its acidity.

Sulfuric acid is a very important commodity chemical; a country's sulfuric acid production is a good indicator of its industrial strength. Many methods for its production are known, including the contact process, the wet sulfuric acid process, and the lead chamber process. Sulfuric acid is also a key substance in the chemical industry. It is most commonly used in fertilizer manufacture but is also important in mineral processing, oil refining, wastewater processing, and chemical synthesis. It has a wide range of end applications, including in domestic acidic drain cleaners, as an electrolyte in lead-acid batteries, as a dehydrating compound, and in various cleaning agents. Sulfuric acid can be obtained by dissolving sulfur trioxide in water.

Physical properties

Grades of sulfuric acid

Although nearly 100% sulfuric acid solutions can be made, the subsequent loss of SO₃ at the boiling point brings the concentration to 98.3% acid. The 98.3% grade, which is more stable in storage, is the usual form of what is described as "concentrated sulfuric acid". Other concentrations are used for different purposes. Some common concentrations are:

Mass fraction H2SO4	Density (kg/L)	Concentration (mol/L)	Common name
<29%	1.00-1.25	<4.2	diluted sulfuric acid
29–32%	1.25–1.28	4.2–5.0	battery acid (used in lead–acid batteries)
62–70%	1.52–1.60	9.6–11.5	chamber acid fertilizer acid
78–80%	1.70–1.73	13.5–14.0	tower acid Glover acid
93.2%	1.83	17.4	66 °Bé ("66-degree Baumé") acid
98.3%	1.84	18.4	concentrated sulfuric acid

"Chamber acid" and "tower acid" were the two concentrations of sulfuric acid produced by the lead chamber process, chamber acid being the acid produced in the lead chamber itself (<70% to avoid contamination with nitrosylsulfuric acid) and tower acid being the acid recovered from the bottom of the Glover tower. They are now obsolete as commercial concentrations of sulfuric acid, although they may be prepared in the laboratory from concentrated sulfuric acid if needed. In particular, "10 M" sulfuric acid (the modern equivalent of chamber acid, used in many titrations), is prepared by slowly adding 98% sulfuric acid to an equal volume of water, with good stirring: the temperature of the mixture can rise to 80 °C (176 °F) or higher.

Sulfuric acid

Sulfuric acid contains not only H₂SO₄ molecules, but is actually an equilibrium of many other chemical species, as it is shown in the table below.

Equilibrium of pure sulfuric acid

Species	mMol/kg
HSO−4	15.0
H3SO+4	11.3
H3O+	8.0
HS2O−7	4.4
H2S2O7	3.6
H2O	0.1

Sulfuric acid is a colorless oily liquid, and has a vapor pressure of <0.001 mmHg at 25 °C and 1 mmHg at 145.8 °C, and 98% sulfuric acid has a vapor pressure of <1 mmHg at 40 °C.

In the solid state, sulfuric acid is a molecular solid that forms monoclinic crystals with nearly trigonal lattice parameters. The structure consists of layers parallel to the (010) plane, in which each molecule is connected by hydrogen bonds to two others. Hydrates H₂SO₄·nH₂O are known for n = 1, 2, 3, 4, 6.5, and 8, although most intermediate hydrates are stable against disproportionation.

Polarity and conductivity

Anhydrous H₂SO₄ is a very polar liquid, having a dielectric constant of around 100. It has a high electrical conductivity, a consequence of autoprotolysis, i.e. self-protonation :

2 H₂SO₄ ⇌ H₃SO+4 + HSO−4

The equilibrium constant for autoprotolysis (25 °C) is:

[H₃SO₄]⁺[HSO₄]⁻ = 2.7 × 10⁻⁴

The corresponding equilibrium constant for water, K_w is 10⁻¹⁴, a factor of 10¹⁰ (10 billion) smaller.

In spite of the viscosity of the acid, the effective conductivities of the H₃SO+4 and HSO−4 ions are high due to an intramolecular proton-switch mechanism (analogous to the Grotthuss mechanism in water), making sulfuric acid a good conductor of electricity. It is also an excellent solvent for many reactions.

Chemical properties

Acidity

An experiment that demonstrates the dehydration properties of concentrated sulfuric acid. When concentrated sulfuric acid comes into contact with sucrose, slow carbonification of the sucrose takes place. The reaction is accompanied by the evolution of gaseous products that contribute to the formation of the foamy carbon pillar that rises above the beaker.

Drops of concentrated sulfuric acid rapidly decompose a piece of cotton towel by dehydration.

The hydration reaction of sulfuric acid is highly exothermic, dilution.

As indicated by its acid dissociation constant, sulfuric acid is a strong acid:

H₂SO₄ → H₃O⁺ + HSO−4 K_a1 = 1000 (pK_a1 = −3)

The product of this ionization is HSO−4, the bisulfate anion. Bisulfate is a far weaker acid:

HSO−4 + H₂O → H₃O⁺ + SO2−4 K_a2 = 0.01 (pK_a2 = 2)

The product of this second dissociation is SO2−4, the sulfate anion.

Dehydration

Concentrated sulfuric acid has a powerful dehydrating property, removing water (H₂O) from other chemical compounds such as table sugar (sucrose) and other carbohydrates, to produce carbon, steam, and heat. Dehydration of table sugar (sucrose) is a common laboratory demonstration. The sugar darkens as carbon is formed, and a rigid column of black, porous carbon called a carbon snake may emerge.

${\underset {\text{sucrose}}{{\ce {C12H22O11}}}}\longrightarrow {\underset {{\text{black}} \atop {\text{graphitic foam}}}{{\ce {12 C}}}}+{\ce {11 H2O_{(g,l)}}}$

Similarly, mixing starch into concentrated sulfuric acid gives elemental carbon and water. The effect of this can also be seen when concentrated sulfuric acid is spilled on paper. Paper is composed of cellulose, a polysaccharide related to starch. The cellulose reacts to give a burnt appearance in which the carbon appears much like soot that results from fire. Although less dramatic, the action of the acid on cotton, even in diluted form, destroys the fabric.

${\underset {\text{polysaccharide}}{{\ce {[C6H10O5]}}_{n}}}\longrightarrow 6n\ {\ce {C}}+5n\ {\ce {H2O}}$

The reaction with copper(II) sulfate can also demonstrate the dehydration property of sulfuric acid. The blue crystals change into white powder as water is removed.

${\underset {{\text{copper(II) sulfate}} \atop {\text{pentahydrate}}}{{\ce {CuSO4*5H2O}}}}\longrightarrow {\underset {{\text{anhydrous}} \atop {\text{copper(II) sulfate}}}{{\ce {CuSO4}}}}+{\ce {5 H2O}}$

Reactions with salts

Sulfuric acid reacts with most bases to give the corresponding sulfate or bisulfate.

Sulfuric acid reacts with sodium chloride, and gives hydrogen chloride gas and sodium bisulfate:

NaCl + H₂SO₄ → NaHSO₄ + HCl

Aluminium sulfate, also known as paper maker's alum, is made by treating bauxite with sulfuric acid:

2 AlO(OH) + 3 H₂SO₄ → Al₂(SO₄)₃ + 4 H₂O

Sulfuric acid can also be used to displace weaker acids from their salts. Reaction with sodium acetate, for example, displaces acetic acid, CH₃COOH, and forms sodium bisulfate:

H₂SO₄ + CH₃CO₂Na → NaHSO₄ + CH₃COOH

Similarly, treating potassium nitrate with sulfuric acid produces nitric acid.

When combined with nitric acid, sulfuric acid acts both as an acid and a dehydrating agent, forming the nitronium ion NO+2, which is important in nitration reactions involving electrophilic aromatic substitution. This type of reaction, where protonation occurs on an oxygen atom, is important in many organic chemistry reactions, such as Fischer esterification and dehydration of alcohols.

Solid state structure of the [D₃SO₄]⁺ ion present in [D₃SO₄]⁺[SbF₆]⁻, synthesized by using DF in place of HF.

When allowed to react with superacids, sulfuric acid can act as a base and can be protonated, forming the [H₃SO₄]⁺ ion. Salts of [H₃SO₄]⁺ have been prepared (e.g. trihydroxyoxosulfonium hexafluoroantimonate(V) [H₃SO₄]⁺[SbF₆]⁻) using the following reaction in liquid HF:

[(CH₃)₃SiO]₂SO₂ + 3 HF + SbF₅ → [H₃SO₄]⁺[SbF₆]⁻ + 2 (CH₃)₃SiF

The above reaction is thermodynamically favored due to the high bond enthalpy of the Si–F bond in the side product. Protonation using simply fluoroantimonic acid, however, has met with failure, as pure sulfuric acid undergoes self-ionization to give [H₃O]⁺ ions:

2 H₂SO₄ ⇌ H₃O⁺ + HS₂O−7

which prevents the conversion of H₂SO₄ to [H₃SO₄]⁺ by the HF/SbF₅ system.

Reactions with metals

Even dilute sulfuric acid reacts with many metals via a single displacement reaction, like other typical acids, producing hydrogen gas and salts (the metal sulfate). It attacks reactive metals (metals at positions above copper in the reactivity series) such as iron, aluminium, zinc, manganese, magnesium, and nickel.

Fe + H₂SO₄ → H₂ + FeSO₄

Concentrated sulfuric acid can serve as an oxidizing agent, releasing sulfur dioxide:

Cu + 2 H₂SO₄ → SO₂ + 2 H₂O + SO2−4 + Cu²⁺

Lead and tungsten, however, are resistant to sulfuric acid.

Reactions with carbon and sulfur

Hot concentrated sulfuric acid oxidizes carbon (as bituminous coal) and sulfur:

C + 2 H₂SO₄ → CO₂ + 2 SO₂ + 2 H₂O

S + 2 H₂SO₄ → 3 SO₂ + 2 H₂O

Electrophilic aromatic substitution

Benzene and many derivatives undergo electrophilic aromatic substitution with sulfuric acid to give the corresponding sulfonic acids:

Sulfur–iodine cycle

Sulfuric acid can be used to produce hydrogen from water:

2 I2 + 2 SO2 + 4 H2O → 4 HI + 2 H2SO4		(120 °C, Bunsen reaction)
2 H2SO4 → 2 SO2 + 2 H2O + O2		(830 °C)
4 HI → 2 I2 + 2 H2		(320 °C)

The compounds of sulfur and iodine are recovered and reused, hence the process is called the sulfur–iodine cycle. This process is endothermic and must occur at high temperatures, so energy in the form of heat has to be supplied. The sulfur–iodine cycle has been proposed as a way to supply hydrogen for a hydrogen-based economy. It is an alternative to electrolysis, and does not require hydrocarbons like current methods of steam reforming. But note that all of the available energy in the hydrogen so produced is supplied by the heat used to make it.

Occurrence

Rio Tinto with its highly acidic water

Sulfuric acid is rarely encountered naturally on Earth in anhydrous form, due to its great affinity for water. Dilute sulfuric acid is a constituent of acid rain, which is formed by atmospheric oxidation of sulfur dioxide in the presence of water – i.e. oxidation of sulfurous acid. When sulfur-containing fuels such as coal or oil are burned, sulfur dioxide is the main byproduct (besides the chief products carbon oxides and water).

Sulfuric acid is formed naturally by the oxidation of sulfide minerals, such as pyrite:

2 FeS₂(s) + 7 O₂ + 2 H₂O → 2 Fe²⁺ + 4 SO2−4 + 4 H⁺

The resulting highly acidic water is called acid mine drainage (AMD) or acid rock drainage (ARD).

The Fe²⁺ can be further oxidized to Fe³⁺:

4 Fe²⁺ + O₂ + 4 H⁺ → 4 Fe³⁺ + 2 H₂O

The Fe³⁺ produced can be precipitated as the hydroxide or hydrous iron oxide:

Fe³⁺ + 3 H₂O → Fe(OH)₃↓ + 3 H⁺

The iron(III) ion ("ferric iron") can also oxidize pyrite:

FeS₂(s) + 14 Fe³⁺ + 8 H₂O → 15 Fe²⁺ + 2 SO2−4 + 16 H⁺

When iron(III) oxidation of pyrite occurs, the process can become rapid. pH values below zero have been measured in ARD produced by this process.

ARD can also produce sulfuric acid at a slower rate, so that the acid neutralizing capacity (ANC) of the aquifer can neutralize the produced acid. In such cases, the total dissolved solids (TDS) concentration of the water can be increased from the dissolution of minerals from the acid-neutralization reaction with the minerals.

Sulfuric acid is used as a defense by certain marine species, for example, the phaeophyte alga Desmarestia munda (order Desmarestiales) concentrates sulfuric acid in cell vacuoles.

Stratospheric aerosol

In the stratosphere, the atmosphere's second layer that is generally between 10 and 50 km above Earth's surface, sulfuric acid is formed by the oxidation of volcanic sulfur dioxide by the hydroxyl radical:

SO₂ + HO^• → HSO₃

HSO₃ + O₂ → SO₃ + HO₂

SO₃ + H₂O → H₂SO₄

Because sulfuric acid reaches supersaturation in the stratosphere, it can nucleate aerosol particles and provide a surface for aerosol growth via condensation and coagulation with other water-sulfuric acid aerosols. This results in the stratospheric aerosol layer.

Extraterrestrial sulfuric acid

The permanent Venusian clouds produce a concentrated acid rain, as the clouds in the atmosphere of Earth produce water rain. Jupiter's moon Europa is also thought to have an atmosphere containing sulfuric acid hydrates.

Manufacturing

Main articles: Contact process, Wet sulfuric acid process, and Lead chamber process

Sulfuric acid is produced from sulfur, oxygen and water via the conventional contact process (DCDA) or the wet sulfuric acid process (WSA).

Contact process

Main article: Contact process

In the first step, sulfur is burned to produce sulfur dioxide.

S(s) + O₂ → SO₂

The sulfur dioxide is oxidized to sulfur trioxide by oxygen in the presence of a vanadium(V) oxide catalyst. This reaction is reversible and the formation of the sulfur trioxide is exothermic.

2 SO₂ + O₂ ⇌ 2 SO₃

The sulfur trioxide is absorbed into 97–98% H₂SO₄ to form oleum (H₂S₂O₇), also known as fuming sulfuric acid or pyrosulphuric acid. The oleum is then diluted with water to form concentrated sulfuric acid.

H₂SO₄ + SO₃ → H₂S₂O₇

H₂S₂O₇ + H₂O → 2 H₂SO₄

Directly dissolving SO₃ in water, called the "wet sulfuric acid process", is rarely practiced because the reaction is extremely exothermic, resulting in a hot aerosol of sulfuric acid that requires condensation and separation.

Wet sulfuric acid process

Main article: Wet sulfuric acid process

In the first step, sulfur is burned to produce sulfur dioxide:

S + O₂ → SO₂ (−297 kJ/mol)

or, alternatively, hydrogen sulfide (H₂S) gas is incinerated to SO₂ gas:

2 H₂S + 3 O₂ → 2 H₂O + 2 SO₂ (−1036 kJ/mol)

The sulfur dioxide then oxidized to sulfur trioxide using oxygen with vanadium(V) oxide as catalyst.

2 SO₂ + O₂ ⇌ 2 SO₃ (−198 kJ/mol) (reaction is reversible)

The sulfur trioxide is hydrated into sulfuric acid H₂SO₄:

SO₃ + H₂O → H₂SO₄(g) (−101 kJ/mol)

The last step is the condensation of the sulfuric acid to liquid 97–98% H₂SO₄:

H₂SO₄(g) → H₂SO₄(l) (−69 kJ/mol)

Other methods

A method that is less well-known is the metabisulfite method, in which metabisulfite is placed at the bottom of a beaker and 12.6 molar concentration hydrochloric acid is added. The resulting gas is bubbled through nitric acid, which will release brown/red vapors of nitrogen dioxide as the reaction proceeds. The completion of the reaction is indicated by the ceasing of the fumes. This method does not produce an inseparable mist, which is quite convenient.

3 SO₂ + 2 HNO₃ + 2 H₂O → 3 H₂SO₄ + 2 NO

Burning sulfur together with saltpeter (potassium nitrate, KNO₃), in the presence of steam, has been used historically. As saltpeter decomposes, it oxidizes the sulfur to SO₃, which combines with water to produce sulfuric acid.

Alternatively, dissolving sulfur dioxide in an aqueous solution of an oxidizing metal salt such as copper(II) or iron(III) chloride:

2 FeCl₃ + 2 H₂O + SO₂ → 2 FeCl₂ + H₂SO₄ + 2 HCl

2 CuCl₂ + 2 H₂O + SO₂ → 2 CuCl + H₂SO₄ + 2 HCl

Two less well-known laboratory methods of producing sulfuric acid, albeit in dilute form and requiring some extra effort in purification. A solution of copper(II) sulfate can be electrolyzed with a copper cathode and platinum/graphite anode to give spongy copper at cathode and evolution of oxygen gas at the anode, the solution of dilute sulfuric acid indicates completion of the reaction when it turns from blue to clear (production of hydrogen at cathode is another sign):

2 CuSO₄ + 2 H₂O → 2 Cu + 2 H₂SO₄ + O₂

More costly, dangerous, and troublesome yet novel is the electrobromine method, which employs a mixture of sulfur, water, and hydrobromic acid as the electrolytic solution. The sulfur is pushed to bottom of container under the acid solution. Then the copper cathode and platinum/graphite anode are used with the cathode near the surface and the anode is positioned at the bottom of the electrolyte to apply the current. This may take longer and emits toxic bromine/sulfur bromide vapors, but the reactant acid is recyclable. Overall, only the sulfur and water are converted to sulfuric acid and hydrogen (omitting losses of acid as vapors):

2 HBr → H₂ + Br₂ (electrolysis of aqueous hydrogen bromide)

Br₂ + Br⁻ ↔ Br−3 (initial tribromide production, eventually reverses as Br⁻ depletes)

2 S + Br₂ → S₂Br₂ (bromine reacts with sulfur to form disulfur dibromide)

S₂Br₂ + 8 H₂O + 5 Br₂ → 2 H₂SO₄ + 12 HBr (oxidation and hydration of disulfur dibromide)

Prior to 1900, most sulfuric acid was manufactured by the lead chamber process. As late as 1940, up to 50% of sulfuric acid manufactured in the United States was produced by chamber process plants.

In the early to mid 19th century "vitriol" plants existed, among other places, in Prestonpans in Scotland, Shropshire and the Lagan Valley in County Antrim Ireland, where it was used as a bleach for linen. Early bleaching of linen was done using lactic acid from sour milk but this was a slow process and the use of vitriol sped up the bleaching process.

Uses

Sulfuric acid production in 2000

Sulfuric acid is a very important commodity chemical, and indeed, a nation's sulfuric acid production is a good indicator of its industrial strength. World production in the year 2004 was about 180 million tonnes, with the following geographic distribution: Asia 35%, North America (including Mexico) 24%, Africa 11%, Western Europe 10%, Eastern Europe and Russia 10%, Australia and Oceania 7%, South America 7%. Most of this amount (≈60%) is consumed for fertilizers, particularly superphosphates, ammonium phosphate and ammonium sulfates. About 20% is used in chemical industry for production of detergents, synthetic resins, dyestuffs, pharmaceuticals, petroleum catalysts, insecticides and antifreeze, as well as in various processes such as oil well acidicizing, aluminium reduction, paper sizing, and water treatment. About 6% of uses are related to pigments and include paints, enamels, printing inks, coated fabrics and paper, while the rest is dispersed into a multitude of applications such as production of explosives, cellophane, acetate and viscose textiles, lubricants, non-ferrous metals, and batteries.

Industrial production of chemicals

The dominant use for sulfuric acid is in the "wet method" for the production of phosphoric acid, used for manufacture of phosphate fertilizers. In this method, phosphate rock is used, and more than 100 million tonnes are processed annually. This raw material is shown below as fluorapatite, though the exact composition may vary. This is treated with 93% sulfuric acid to produce calcium sulfate, hydrogen fluoride (HF) and phosphoric acid. The HF is removed as hydrofluoric acid. The overall process can be represented as:

${\underset {\text{fluorapatite}}{{\ce {Ca5(PO4)3F}}}}+{\ce {5 H2SO4 + 10 H2O}}\longrightarrow {\underset {{\text{calcium sulfate}} \atop {\text{dihydrate}}}{{\ce {5 CaSO4*2H2O}}}}+{\ce {HF + 3 H3PO4}}$

Ammonium sulfate, an important nitrogen fertilizer, is most commonly produced as a byproduct from coking plants supplying the iron and steel making plants. Reacting the ammonia produced in the thermal decomposition of coal with waste sulfuric acid allows the ammonia to be crystallized out as a salt (often brown because of iron contamination) and sold into the agro-chemicals industry.

Sulfuric acid is also important in the manufacture of dyestuffs solutions.

Industrial cleaning agent

Sulfuric acid is used in steelmaking and other metallurgical industries as a pickling agent for removal of rust and fouling. Used acid is often recycled using a spent acid regeneration (SAR) plant. These plants combust spent acid with natural gas, refinery gas, fuel oil or other fuel sources. This combustion process produces gaseous sulfur dioxide (SO₂) and sulfur trioxide (SO₃) which are then used to manufacture "new" sulfuric acid.

Hydrogen peroxide (H₂O₂) can be added to sulfuric acid to produce piranha solution, a powerful but very toxic cleaning solution with which substrate surfaces can be cleaned. Piranha solution is typically used in the microelectronics industry, and also in laboratory settings to clean glassware.

Catalyst

Sulfuric acid is used for a variety of other purposes in the chemical industry. For example, it is the usual acid catalyst for the conversion of cyclohexanone oxime to caprolactam, used for making nylon. It is used for making hydrochloric acid from salt via the Mannheim process. Much H₂SO₄ is used in petroleum refining, for example as a catalyst for the reaction of isobutane with isobutylene to give isooctane, a compound that raises the octane rating of gasoline (petrol). Sulfuric acid is also often used as a dehydrating or oxidizing agent in industrial reactions, such as the dehydration of various sugars to form solid carbon.

Electrolyte

Domestic acidic drain cleaners usually contain sulfuric acid at a high concentration which turns a piece of pH paper red and chars it instantly, demonstrating both the strong acidic nature and dehydrating property.

Sulfuric acid acts as the electrolyte in lead–acid batteries (lead-acid accumulator):

At anode:

Pb + SO2−4 ⇌ PbSO₄ + 2 e⁻

At cathode:

PbO₂ + 4 H⁺ + SO2−4 + 2 e⁻ ⇌ PbSO₄ + 2 H₂O

Domestic acidic drain cleaners can be used to dissolve grease, hair and even tissue paper inside water pipes.

Overall:

Pb + PbO₂ + 4 H⁺ + 2 SO2−4 ⇌ 2 PbSO₄ + 2 H₂O

Domestic uses

Sulfuric acid at high concentrations is frequently the major ingredient in domestic acidic drain cleaners which are used to remove grease, hair, tissue paper, etc. Similar to their alkaline versions, such drain openers can dissolve fats and proteins via hydrolysis. Moreover, as concentrated sulfuric acid has a strong dehydrating property, it can remove tissue paper via dehydrating process as well. Since the acid may react with water vigorously, such acidic drain openers should be added slowly into the pipe to be cleaned.

History

John Dalton's 1808 sulfuric acid molecule shows a central sulfur atom bonded to three oxygen atoms, or sulfur trioxide, the anhydride of sulfuric acid.

Vitriols

The study of vitriols (hydrated sulfates of various metals forming glassy minerals from which sulfuric acid can be derived) began in ancient times. Sumerians had a list of types of vitriol that they classified according to the substances' color. Some of the earliest discussions on the origin and properties of vitriol is in the works of the Greek physician Dioscorides (first century AD) and the Roman naturalist Pliny the Elder (23–79 AD). Galen also discussed its medical use. Metallurgical uses for vitriolic substances were recorded in the Hellenistic alchemical works of Zosimos of Panopolis, in the treatise Phisica et Mystica, and the Leyden papyrus X. Medieval Islamic chemists like the authors writing under the name of Jabir ibn Hayyan (died c. 806 – c. 816 AD, known in Latin as Geber), Abu Bakr al-Razi (865 – 925 AD, known in Latin as Rhazes), Ibn Sina (980 – 1037 AD, known in Latin as Avicenna), and Muhammad ibn Ibrahim al-Watwat (1234 – 1318 AD) included vitriol in their mineral classification lists.

Jabir ibn Hayyan, Abu Bakr al-Razi, Ibn Sina, et al.

The Jabirian authors and al-Razi experimented extensively with the distillation of various substances, including vitriols. In one recipe recorded in his Kitāb al-Asrār ('Book of Secrets'), al-Razi may have created sulfuric acid without being aware of it:

Take white (Yemeni) alum, dissolve it and purify it by filtration. Then distil (green?) vitriol with copper-green (the acetate), and mix (the distillate) with the filtered solution of the purified alum, afterwards let it solidify (or crystallise) in the glass beaker. You will get the best qalqadis (white alum) that may be had.

— Abu Bakr al-Razi, Kitāb al-Asrār

In an anonymous Latin work variously attributed to Aristotle (under the title Liber Aristotilis, 'Book of Aristotle'), to al-Razi (under the title Lumen luminum magnum, 'Great Light of Lights'), or to Ibn Sina, the author speaks of an 'oil' (oleum) obtained through the distillation of iron(II) sulfate (green vitriol), which was likely 'oil of vitriol' or sulfuric acid. The work refers multiple times to Jabir ibn Hayyan's Book of Seventy (Liber de septuaginta), one of the few Arabic Jabir works that were translated into Latin. The author of the version attributed to al-Razi also refers to the Liber de septuaginta as his own work, showing that he erroneously believed the Liber de septuaginta to be a work by al-Razi. There are several indications that the anonymous work was an original composition in Latin, although according to one manuscript it was translated by a certain Raymond of Marseilles, meaning that it may also have been a translation from the Arabic.

According to Ahmad Y. al-Hassan, three recipes for sulfuric acid occur in an anonymous Karshuni manuscript containing a compilation taken from several authors and dating from before c. 1100 AD. One of them runs as follows:

The water of vitriol and sulphur which is used to irrigate the drugs: yellow vitriol three parts, yellow sulphur one part, grind them and distil them in the manner of rose-water.

A recipe for the preparation of sulfuric acid is mentioned in Risālat Jaʿfar al-Sādiq fī ʿilm al-ṣanʿa, an Arabic treatise falsely attributed to the Shi'i Imam Ja'far al-Sadiq (died 765). Julius Ruska dated this treatise to the 13th century, but according to Ahmad Y. al-Hassan it likely dates from an earlier period:

Then distil green vitriol in a cucurbit and alembic, using medium fire; take what you obtain from the distillate, and you will find it clear with a greenish tint.

Vincent of Beauvais, Albertus Magnus, and pseudo-Geber

Sulfuric acid was called 'oil of vitriol' by medieval European alchemists because it was prepared by roasting iron(II) sulfate or green vitriol in an iron retort. The first allusions to it in works that are European in origin appear in the thirteenth century AD, as for example in the works of Vincent of Beauvais, in the Compositum de Compositis ascribed to Albertus Magnus, and in pseudo-Geber's Summa perfectionis.

Producing sulfuric acid from sulfur

A method of producing oleum sulphuris per campanam, or "oil of sulfur by the bell", was known by the 16th century: it involved burning sulfur under a glass bell in moist weather (or, later, under a moistened bell). However, it was very inefficient (according to Gesner, 5 pounds (2.3 kg) of sulfur converted into less than 1 ounce (0.03 kg) of acid), and the resulting product was contaminated by sulfurous acid (or rather, solution of sulfur dioxide) so most alchemists (including, for example, Isaac Newton) didn't consider it equivalent with the "oil of vitriol".

In the 17th century, Johann Glauber discovered that adding saltpeter (potassium nitrate, KNO₃) significantly improves the output, also replacing moisture with steam. As saltpeter decomposes, it oxidizes the sulfur to SO₃, which combines with water to produce sulfuric acid. In 1736, Joshua Ward, a London pharmacist, used this method to begin the first large-scale production of sulfuric acid.

Lead chamber process

In 1746 in Birmingham, John Roebuck adapted this method to produce sulfuric acid in lead-lined chambers, which were stronger, less expensive, and could be made larger than the previously used glass containers. This process allowed the effective industrialization of sulfuric acid production. After several refinements, this method, called the lead chamber process or "chamber process", remained the standard for sulfuric acid production for almost two centuries.

Distillation of pyrite

Sulfuric acid created by John Roebuck's process approached a 65% concentration. Later refinements to the lead chamber process by French chemist Joseph Louis Gay-Lussac and British chemist John Glover improved concentration to 78%. However, the manufacture of some dyes and other chemical processes require a more concentrated product. Throughout the 18th century, this could only be made by dry distilling minerals in a technique similar to the original alchemical processes. Pyrite (iron disulfide, FeS₂) was heated in air to yield iron(II) sulfate, FeSO₄, which was oxidized by further heating in air to form iron(III) sulfate, Fe₂(SO₄)₃, which, when heated to 480 °C, decomposed to iron(III) oxide and sulfur trioxide, which could be passed through water to yield sulfuric acid in any concentration. However, the expense of this process prevented the large-scale use of concentrated sulfuric acid.

Contact process

In 1831, British vinegar merchant Peregrine Phillips patented the contact process, which was a far more economical process for producing sulfur trioxide and concentrated sulfuric acid. Today, nearly all of the world's sulfuric acid is produced using this method.

Safety

Laboratory hazards

Drops of 98% sulfuric acid char a piece of tissue paper instantly. Carbon is left after the dehydration reaction staining the paper black.

Nitrile glove exposed to drops of 98% sulfuric acid for 10 minutes

Superficial chemical burn caused by two 98% sulfuric acid splashes (forearm skin)

Sulfuric acid is capable of causing very severe burns, especially when it is at high concentrations. In common with other corrosive acids and alkali, it readily decomposes proteins and lipids through amide and ester hydrolysis upon contact with living tissues, such as skin and flesh. In addition, it exhibits a strong dehydrating property on carbohydrates, liberating extra heat and causing secondary thermal burns. Accordingly, it rapidly attacks the cornea and can induce permanent blindness if splashed onto eyes. If ingested, it damages internal organs irreversibly and may even be fatal. Protective equipment should hence always be used when handling it. Moreover, its strong oxidizing property makes it highly corrosive to many metals and may extend its destruction on other materials. Because of such reasons, damage posed by sulfuric acid is potentially more severe than that by other comparable strong acids, such as hydrochloric acid and nitric acid.

Sulfuric acid must be stored carefully in containers made of nonreactive material (such as glass). Solutions equal to or stronger than 1.5 M are labeled "CORROSIVE", while solutions greater than 0.5 M but less than 1.5 M are labeled "IRRITANT". However, even the normal laboratory "dilute" grade (approximately 1 M, 10%) will char paper if left in contact for a sufficient time.

The standard first aid treatment for acid spills on the skin is, as for other corrosive agents, irrigation with large quantities of water. Washing is continued for at least ten to fifteen minutes to cool the tissue surrounding the acid burn and to prevent secondary damage. Contaminated clothing is removed immediately and the underlying skin washed thoroughly.

Dilution hazards

Preparation of diluted acid can be dangerous due to the heat released in the dilution process. To avoid splattering, the concentrated acid is usually added to water and not the other way around. A saying used to remember this is "Do like you oughta, add the acid to the water". Water has a higher heat capacity than the acid, and so a vessel of cold water will absorb heat as acid is added.

Comparison of sulfuric acid and water

Physical property	H2SO4	Water	Units
Density	1.84	1.0	kg/L
Volumetric heat capacity	2.54	4.18	kJ/L
Boiling point	337	100	°C

Also, because the acid is denser than water, it sinks to the bottom. Heat is generated at the interface between acid and water, which is at the bottom of the vessel. Acid will not boil, because of its higher boiling point. Warm water near the interface rises due to convection, which cools the interface, and prevents boiling of either acid or water.

In contrast, addition of water to concentrated sulfuric acid results in a thin layer of water on top of the acid. Heat generated in this thin layer of water can boil, leading to the dispersal of a sulfuric acid aerosol or worse, an explosion.

Preparation of solutions greater than 6 M (35%) in concentration is dangerous, unless the acid is added slowly enough to allow the mixture sufficient time to cool. Otherwise, the heat produced may be sufficient to boil the mixture. Efficient mechanical stirring and external cooling (such as an ice bath) are essential.

Reaction rates double for about every 10-degree Celsius increase in temperature. Therefore, the reaction will become more violent as dilution proceeds, unless the mixture is given time to cool. Adding acid to warm water will cause a violent reaction.

On a laboratory scale, sulfuric acid can be diluted by pouring concentrated acid onto crushed ice made from de-ionized water. The ice melts in an endothermic process while dissolving the acid. The amount of heat needed to melt the ice in this process is greater than the amount of heat evolved by dissolving the acid so the solution remains cold. After all the ice has melted, further dilution can take place using water.

Industrial hazards

Sulfuric acid is non-flammable.

The main occupational risks posed by this acid are skin contact leading to burns (see above) and the inhalation of aerosols. Exposure to aerosols at high concentrations leads to immediate and severe irritation of the eyes, respiratory tract and mucous membranes: this ceases rapidly after exposure, although there is a risk of subsequent pulmonary edema if tissue damage has been more severe. At lower concentrations, the most commonly reported symptom of chronic exposure to sulfuric acid aerosols is erosion of the teeth, found in virtually all studies: indications of possible chronic damage to the respiratory tract are inconclusive as of 1997. Repeated occupational exposure to sulfuric acid mists may increase the chance of lung cancer by up to 64 percent. In the United States, the permissible exposure limit (PEL) for sulfuric acid is fixed at 1 mg/m³: limits in other countries are similar. There have been reports of sulfuric acid ingestion leading to vitamin B12 deficiency with subacute combined degeneration. The spinal cord is most often affected in such cases, but the optic nerves may show demyelination, loss of axons and gliosis.

Legal restrictions

International commerce of sulfuric acid is controlled under the United Nations Convention Against Illicit Traffic in Narcotic Drugs and Psychotropic Substances, 1988, which lists sulfuric acid under Table II of the convention as a chemical frequently used in the illicit manufacture of narcotic drugs or psychotropic substances.

See also

• Aqua regia
• Diethyl ether – also known as "sweet oil of vitriol"
• Piranha solution
• Sulfur oxoacid
• Sulfuric acid poisoning

External links

• International Chemical Safety Card 0362
• Sulfuric acid at The Periodic Table of Videos (University of Nottingham)
• NIOSH Pocket Guide to Chemical Hazards
• CDC – Sulfuric Acid – NIOSH Workplace Safety and Health Topic
• Calculators: surface tensions, and densities, molarities and molalities of aqueous sulfuric acid