Jump to content

Cerberus-class monitor

From Wikipedia, the free encyclopedia
(Redirected from Cerberus class battleship)

Stern view of Cerberus at Williamstown, Victoria in 1871
Class overview
Builders
Operators
Built1867–1870
In commission1870–1924
Completed2
General characteristics
Displacement3,344 long tons (3,398 t)
Length225 ft (69 m)
Beam45 ft (14 m)
Draught15 ft 4 in (4.67 m)
Propulsion
  • 2 shaft Maudslay, 1,360 ihp (Cerberus)
  • 2 shaft Ravenhill 1,436 ihp, (Magdala)
Speed
  • 9.75 knots (11 mph; 18 km/h) (Cerberus)
  • 10.6 knots (12 mph; 20 km/h) (Magdala)
Complement155
Armament4 × 10-inch (254 mm) (2 × 2) Rifled Muzzle Loading guns
Armour
  • Belt: 6–8 in (150–200 mm) with 9–11 in (230–280 mm) wood backing
  • Turret: 9–10 in (230–250 mm)
  • Breastworks: 8–9 in (200–230 mm)
  • Deck: 1–1.5 in (25–38 mm)

The Cerberus-class breastwork monitor was a pair of breastwork monitors built for the Royal Navy in the 1860s.

Design

[edit]

Also referred to as "ironclads" and "turret ships", the ships of the Cerberus class were designed by Sir Edward Reed following requests by several dominions and colonies of the British Empire for warships to be used as coastal defence ships. The class consisted of two ships: HMS Cerberus, which was operated by the colony of Victoria, and HMS Magdala, which spent her life operating in Bombay Harbour.

The size of the ships was limited by cost. They were designed and built to be used as local defence ships, and it was not expected that they would ever need to be deployed far away from their bases. It was therefore possible to design them without sails or rigging and dependent only upon their engines, with a resulting limitation in their effective range.

The absence of masts and rigging allowed more weight to be worked into the ship's armour. This also meant it was possible to arm the ships with two gun turrets, one fore and one aft, which had wholly unobstructed fields of fire over the bow and stern, and on wide arcs amidships. The turrets were mounted on the upper deck and hence had a greater height above water and a correspondingly greater command than guns mounted on the main deck. The turret armament provided an additional advantage of allowing the ships to have a low freeboard. This increased the steadiness of the ship and allowed the hull armour to be applied more thickly over a more limited height of exposed hull.

Construction

[edit]
Ship Builder Laid down Launched Completed Fate
HMVS Cerberus Palmers, Jarrow 1 September 1867 2 December 1868 September 1870 Scuttled as breakwater, 26 July 1924
HMS Magdala Thames Ironworks, Blackwall, London 6 October 1868 2 March 1870 November 1870 Sold, 1903

Ships

[edit]

See also

[edit]
  • HMS Abyssinia – harbour defence vessel at Bombay, India, built to a similar, but smaller, design.

Citations

[edit]

Bibliography

[edit]
  • Archibald, E.H.H. (1971). The Metal Fighting Ship in the Royal Navy 1860–1970. New York: Arco Publishing Co. ISBN 0-668-02509-3.
  • Brown, D.K., Warrior to Dreadnought, Warship Development 1860–1906, ISBN 1-84067-529-2
  • Colledge, J. J.; Warlow, Ben (2006) [1969]. Ships of the Royal Navy: The Complete Record of all Fighting Ships of the Royal Navy (Rev. ed.). London: Chatham Publishing. ISBN 978-1-86176-281-8.
  • Friedman, Norman (2018). British Battleships of the Victorian Era. Annapolis, Maryland: Naval Institute Press. ISBN 978-1-68247-329-0.
  • Fuller, Howard J. (December 2005). ""A portentous spectacle": The Monitor U.S.S. Miantonomoh Visits England" (PDF). International Journal of Naval History. 4 (3). Archived from the original (PDF) on 23 July 2008. Retrieved 27 November 2008.
  • Parkes, Oscar (1990) [1957]. British Battleships. Annapolis, Maryland: Naval Institute Press. ISBN 1-55750-075-4.
  • Roberts, John (1979). "Great Britain (including Empire Forces)". In Chesneau, Roger & Kolesnik, Eugene M. (eds.). Conway's All the World's Fighting Ships 1860–1905. New York: Mayflower Books. pp. 1–113. ISBN 0-8317-0302-4.