Jump to content

Sodium methoxide

From Wikipedia, the free encyclopedia
(Redirected from CH3NaO)
Sodium methoxide
Names
IUPAC name
Sodium methoxide
Other names
Sodium methylate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.004.273 Edit this at Wikidata
UNII
  • InChI=1S/CH3O.Na/c1-2;/h1H3;/q-1;+1 checkY
    Key: WQDUMFSSJAZKTM-UHFFFAOYSA-N checkY
  • InChI=1/CH3O.Na/c1-2;/h1H3;/q-1;+1
    Key: WQDUMFSSJAZKTM-UHFFFAOYAC
  • [Na+].[O-]C
Properties
CH3NaO
Molar mass 54.02 g/mol
Appearance White solid
Melting point 127 °C (261 °F; 400 K)
Boiling point 350 °C (662 °F; 623 K)[1] (decomposition)
Reacts with water
Solubility Soluble in ethanol, methanol
Insoluble in hydrocarbons
Structure
Hexagonal
Hazards
GHS labelling:
GHS02: FlammableGHS05: CorrosiveGHS07: Exclamation mark
Danger
H251, H302, H314[2]
P235+P410, P280, P305+P351+P338, P310[2]
Safety data sheet (SDS) Sigma[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Sodium methoxide is the simplest sodium alkoxide. With the formula CH3ONa, it is a white solid, which is formed by the deprotonation of methanol. It is a widely used reagent in industry and the laboratory. It is also a dangerously caustic base.

Preparation and structure

[edit]

Sodium methoxide is prepared by treating methanol with sodium:

2 Na + 2 CH3OH → 2 CH3ONa + H2

The reaction is so exothermic that ignition is possible. The resulting solution, which is colorless, is often used as a source of sodium methoxide, but the pure material can be isolated by evaporation followed by heating to remove residual methanol.

As a solid, sodium methoxide is polymeric, with sheet-like arrays of Na+ centers, each bonded to four oxygen centers.[3]

The structure, and hence the basicity, of sodium methoxide in solution depends on the solvent. It is a significantly stronger base in DMSO where it is more fully ionized and free of hydrogen bonding.[4]

Applications

[edit]

Organic synthesis

[edit]

Sodium methoxide is a routinely used base in organic chemistry, applicable to the synthesis of numerous compounds ranging from pharmaceuticals to agrichemicals.[4] As a base, it is employed in dehydrohalogenations and various condensations.[5] It is also a nucleophile for the production of methyl ethers.[6]

Industrial applications

[edit]

Sodium methoxide is used as an initiator of anionic addition polymerization with ethylene oxide, forming a polyether with high molecular weight.[7] Biodiesel is prepared from vegetable oils and animal fats (fatty acid triglycerides) by transesterification with methanol to give fatty acid methyl esters (FAMEs). Sodium methoxide acts as a catalyst for this reaction, but will combine with any free fatty acids present in the oil/fat feedstock to form soap byproducts.[citation needed]

Stability

[edit]

The solid hydrolyzes in water to give methanol and sodium hydroxide. Indeed, samples of sodium methoxide are often contaminated with sodium hydroxide, which is difficult to detect. The compound absorbs carbon dioxide from the air to form methanol and sodium carbonate, thus diminishing the alkalinity of the base.[citation needed]

CH3ONa + CO2 + H2O → 2 CH3OH + Na2CO3

Commercial batches of sodium methoxide show variable levels of degradation, and were a major source of irreproducibility when used in Suzuki reactions.[8]

Safety

[edit]

Sodium methoxide is highly caustic and reacts with water to give methanol, which is toxic and volatile.

NFPA 704

[edit]

The ratings for this substance vary widely.

Rating
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
3
4
3
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
4
2
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
3
2
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
2
2
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
2
2
2
Source State of Connecticut[9] DuPont[10] Pharmco AAPR[11] ScienceLab[12] (Both ratings on same sheet)

See also

[edit]

References

[edit]
  1. ^ Chandran, K.; Kamruddin, M.; Ajikumar, P.K.; et al. (2006). "Kinetics of thermal decomposition of sodium methoxide and ethoxide". Journal of Nuclear Materials. 358 (2–3): 111–128. Bibcode:2006JNuM..358..111C. doi:10.1016/j.jnucmat.2006.07.003. ISSN 0022-3115.
  2. ^ a b c Sigma-Aldrich Co., Sodium methoxide. Retrieved on 2022-03-21.
  3. ^ Weiss, E. (1964). "Die Kristallstruktur des Natriummethylats" [The Crystal Structure of Sodium Methylate]. Zeitschrift für Anorganische und Allgemeine Chemie (in German). 332 (3–4): 197–203. doi:10.1002/zaac.19643320311.
  4. ^ a b El-Kattan, Y.; McAtee, J.; Bessieres, B. (2006). "Sodium Methoxide". Encyclopedia of Reagents for Organic Synthesis. New York: John Wiley & Sons. doi:10.1002/047084289X.rs089m.pub2. ISBN 0471936235.
  5. ^ Curtis, O. E. Jr.; Sandri, J. M.; Crocker, R. E.; Hart, H. (1958). "Dicyclopropyl ketone". Organic Syntheses. 38: 19. doi:10.15227/orgsyn.038.0019; Collected Volumes, vol. 4, p. 278.
  6. ^ Reverdin, F. (1927). "3,5-Dinitroanisole". Organic Syntheses. 7: 28. doi:10.15227/orgsyn.007.0028; Collected Volumes, vol. 1, p. 219.
  7. ^ Bailey, Frederick E.; Koleske, Joseph V. (2000). "Polyoxyalkylenes". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a21_579. ISBN 3527306730.
  8. ^ Wethman, Robert; Derosa, Joseph; Tran, Van; et al. (2020-08-19), An Under-Appreciated Source of Reproducibility Issues in Cross-Coupling: Solid-State Decomposition of Primary Sodium Alkoxides in Air, American Chemical Society, doi:10.26434/chemrxiv.12818234.v1, S2CID 242420220
  9. ^ "Biodiesel: From the Field to the End User" (PDF). ct.gov. Office of Education and Data Management, State of Connecticut. 2008-04-08. Archived from the original on 2014-02-25. Retrieved 2022-01-29.{{cite web}}: CS1 maint: unfit URL (link)
  10. ^ "Product Safety Summary Sheet DuPont™ Sodium Methoxide (Sodium Methylate)". DuPont. 2012-09-11. Retrieved 2022-01-29 – via nanopdf.com.
  11. ^ "Pharmco AAPR Material Safety Data Sheet" (PDF). pharmcoaaper.com. Archived from the original (PDF) on 2014-02-23. Retrieved 2022-01-29.
  12. ^ "ScienceLab Material Safety Data Sheet". Archived from the original on 2015-09-09. Retrieved 2022-01-29.
Retrieved from "https://wiki.riteme.site/w/index.php?title=Sodium_methoxide&oldid=1229975117"