Jump to content

Beckfoot Bridge

Coordinates: 53°50′32″N 1°50′30″W / 53.8422°N 1.8418°W / 53.8422; -1.8418
From Wikipedia, the free encyclopedia
(Redirected from Bingley Beckfoot Bridge)

Beckfoot Bridge and ford

Beckfoot Bridge (also known as the Packhorse Bridge) was historically a significant crossing point over Harden Beck[1] in Bingley, West Yorkshire, England.[2]

The cost of repair and maintenance of bridges was meted out by either the county, wapentake, parish or township, dependent on the bridge's importance. Beckfoot Bridge was the responsibility of Bingley Township as Ireland and Cottingley bridges were built rebuilt in stone and afforded better links to the town.[3]

It was constructed alongside the historical ford across the beck in 1723, replacing a previous wooden bridge.[4] Two contractors were paid £10 to build the bridge and to maintain it and keep it in good order for seven years.[1] It is wide enough for pedestrians or single file horses. In 1974, it was given grade II listed building status.[5][6]

See also

[edit]

References

[edit]
  1. ^ a b Speight, Harry (1898). Chronicles of Old Bingley. Eliot Stock. p. 88. Retrieved 4 December 2015.
  2. ^ "Beckfoot Bridge". Structurae. Retrieved 4 December 2015.
  3. ^ Dodd, E E (1958). Bingley - A Yorkshire Town Through Nine Centuries. Guiseley: MTD Rigg. p. 65. OCLC 654891698.
  4. ^ "Beckfoot Bridge". Bingley Civic Trust. Archived from the original on 6 April 2015. Retrieved 28 May 2015.
  5. ^ Historic England. "Details from listed building database (1199392)". National Heritage List for England. Retrieved 4 November 2012.
  6. ^ "Bridge Approximately 15 Metres North of Beckfoot Farmhouse, Bingley, Bradford". British Listed Buildings. Retrieved 19 October 2018.

53°50′32″N 1°50′30″W / 53.8422°N 1.8418°W / 53.8422; -1.8418