Airsoft: Difference between revisions
Hodiedodie (talk | contribs) Corrected the date |
|||
Line 12: | Line 12: | ||
Combat situations on the battlefield often involve the use of common [[military tactics]] to achieve the objectives set in each game. Participants typically use varying types of non-lethal weaponry designed as replicas of real [[firearm]]s, tactical gear, and accessories used by modern military and police organizations. |
Combat situations on the battlefield often involve the use of common [[military tactics]] to achieve the objectives set in each game. Participants typically use varying types of non-lethal weaponry designed as replicas of real [[firearm]]s, tactical gear, and accessories used by modern military and police organizations. |
||
== History == |
== History == |
||
In the |
In the 1980s, Japan made it illegal to own a firearm, though there was a large interest in them. Because of this interest, manufacturers started to produce spring-powered guns that appear real. These guns fired several calibers of plastic or rubber BBs, but were eventually standardized into 6 mm and 8 mm sizes. The early spring powered weapons then morphed into gas and battery powered ones, using a variety of systems. The hobby then migrated to North America in the mid 1990s. This is due in large part to the addition of many new AEG (Automatic Electric Gun) manufacturers in Japan, China, Taiwan, as well as many others. |
||
Airsoft has also been adopted for training purposes for both military and police units (more often police units). Systema produces guns specifically designed for this purpose and are a 1:1 scale, in every aspect, of their real steel counterparts. |
Airsoft has also been adopted for training purposes for both military and police units (more often police units). Systema produces guns specifically designed for this purpose and are a 1:1 scale, in every aspect, of their real steel counterparts. |
Revision as of 00:36, 16 October 2009
This article may require copy editing for grammar, style, cohesion, tone, or spelling. (August 2009) |
This article needs additional citations for verification. (August 2009) |
Airsoft participants organize meetings at dedicated airsoft battlefields often adapted to provide walls, bunkers, trenches, buildings, towers, and other similar man-made field enhancements to simulate real combat environments.
Airsoft games vary greatly in style and composition depending on location, budget, and the quantity of participants but often range from short-term skirmishes, organized scenarios, military simulations, or historical reenactments.
Combat situations on the battlefield often involve the use of common military tactics to achieve the objectives set in each game. Participants typically use varying types of non-lethal weaponry designed as replicas of real firearms, tactical gear, and accessories used by modern military and police organizations.
History
In the 1980s, Japan made it illegal to own a firearm, though there was a large interest in them. Because of this interest, manufacturers started to produce spring-powered guns that appear real. These guns fired several calibers of plastic or rubber BBs, but were eventually standardized into 6 mm and 8 mm sizes. The early spring powered weapons then morphed into gas and battery powered ones, using a variety of systems. The hobby then migrated to North America in the mid 1990s. This is due in large part to the addition of many new AEG (Automatic Electric Gun) manufacturers in Japan, China, Taiwan, as well as many others.
Airsoft has also been adopted for training purposes for both military and police units (more often police units). Systema produces guns specifically designed for this purpose and are a 1:1 scale, in every aspect, of their real steel counterparts.
Methods of play
MilSim
"MilSim", short for Military Simulation, generally combines airsoft play with some military live-action role-playing elements. This type of play may be considered "hard core" by many players because of the heightened amount of involvement required. Several goals or missions may be assigned to each team, along with a basic load-out (i.e., supply) of ammunition, rations, explosives, and radios.
A key element in MilSim games is the use of low-capacity magazines, replicating the actual magazine capacity of the authentic firearm the airsoft gun is replicating. Examples of these include the 30 round STANAG magazines of the M4, M16, Type 89, SCAR-L and several others.
Teams will remain in the field for the duration of play, only returning to a staging area or "safe zone" for medical emergencies and for other special circumstances. Military simulation games often last several days. For example, the large Berget annual event in Sweden lasts for six days with no breaks. In large scale MilSim operations, players often use vehicles such as painted vans and trucks. In some cases, such as Operation Irene (an annual MilSim held in the midwest U.S.), real APCs and tanks are used [1]. Such large scale events can take place in MOUT (Military Operations in Urban Terrain) facilities.
True MilSim requires players to adhere to an agreed level of uniform authenticity and to play as part of a team. Open days or skirmishes where sides are nominally identified by colored armbands but where players dress in a variety of military or paramilitary impressions is not MilSim. These events are sometimes known as SISK (Skirmish In Silly Kit).
Airsoft games are not limited to MilSim or "skirmish" modes. There is great versatility and flexibility in play styles.
Honor system
Airsoft play employs an honor system whereby the players rely on each others' honesty to admit to being hit, because unlike paintballs, airsoft pellets do not leave visible marks on clothing.
The effect of a marking bb on the honor system is an addition to the game but does not remove "honor" from the game as it still remains with the player to choose whether or not to call his or her hits. Instead, it simply allows for verification when the need arises. For instance, depending on the muzzle velocity of the gun and distance from the shooter, the targeted player may not feel the impact.
Players are discouraged from calling out hits on an opponent - instead players are expected to signal a marshal to judge how effectively they have hit their opponent. Simulated 'knife kills' can, at the venue's discretion, be recognized when a player touches or taps an unaware opponent. This prevents the player being forced to shoot him or her at point-blank range. Similarly, a 'courtesy kill' occurs when a player refrains from shooting an opponent at close range while enforcing that opponent's surrender, instead of risking injury. Players are usually prohibited from firing blindly when not able to see their target, especially around corners. In some instances, players don't call out hits they have sustained as a result of this "blind fire". Players are expected to avoid the shooting of an opponent who has already admitted to being hit. Harsh language and forceful physical contact between players is strongly discouraged and even penalized. Players are expected to resolve disputes politely and with proper decorum.
All airsoft players are expected to acknowledge being hit, even if they are in doubt, by shouting "I'm hit" loudly, and raising their hand or gun high and/or displaying a 'hit indicator' while walking back to the safe zone. Paintball style "speedball" games may include the aforementioned hit markers. A hit indicator can be either a bright-colored cloth during daytime or a blinker or mini-flashlight when in dim light or darkness.
Teams
There are many organized teams, of varying sizes, in various countries. Some prominent teams have 50 or more players, and are able to send delegations to regional or national events. In the Philippines, there are many amorphous groups of airsoft players loosely organized into "teams" of varying sizes. There have been attempts to create large nationwide organizations of airsofters but these have neither succeeded nor persisted in the past, although regional organizations have been able to sustain a significant membership.[2]
Ballistics and speed
Kinetic energy is the energy that is transferred from the pellet to its target upon impact. One joule of energy will be transferred by a 0.20 g BB at 100 metres per second (330 ft/s).[3] A typical set of limits on guns might be 100 m/s (330 ft/s) for CQB, 125 m/s (410 ft/s) for outdoors, and 175 m/s (570 ft/s) for bolt action sniper rifles, all measured with a 0.20 g BB. The amount of kinetic energy depends on the weight of the BB and how fast the gun can propel it. Certain places play "no velocity limit" games.
In the United Kingdom and Ireland, the energy limit for Airsoft guns is usually one joule (100 m/s with a 0.20 g, 6 mm BB) regardless of the type of game play. Weapons with only semi-automatic mode are allowed up to 400fps and single action weapons are allowed up to 500fps.[4]
Most Airsoft guns are capable of shooting from 50 m/s (160 ft/s) to 125 m/s (410 ft/s), though it is also possible to purchase upgraded internals for some Airsoft guns that will enable up to 180 m/s (590 ft/s) projectile velocities.[5]
A hop-up unit, if present, puts backspin on the BB, generating lift and giving it a greater effective range. The range of any Airsoft gun depends on both the muzzle velocity and the amount of hop applied. Airsoft guns can have a range of 75 metres (246 ft) or more with the right combination of power, barrel, and ammunition as well as a good hop-up unit. A good hop-up unit can sometimes double the range.
Safety
Eye and face protection
The minimum safe level of gear required to participate in most games includes a pair of impact-rated goggles or shooting glasses to protect participants' eyes. Traditional prescription glasses and sunglasses, or goggles not designed specifically for use with airsoft or paintball guns may break or shatter upon being struck, causing damage to the eye.
Many airsoft groups and fields require that eye protection fully seals the area around the eyes, and also meets or exceeds ANSI's Z87.1-2003 goggle standard for eye protection, namely, the ability to absorb 3 joules of impact energy without damage. Some players instead opt for paintball goggles, which are held to a higher impact rating standard, ASTM's F1776.[6]
The best overall protection is offered by paintball masks. These masks protect the face, teeth, and ears. Some airsoft masks are made with mesh screens, though there is debate that fragments from lower quality or bio-degradable BBs may pass through the mesh and enter the eye, although there have been no recorded incidents of such an occurrence.[7] While masks offer superior protection, they can interfere with the use of scopes and in cheaper masks, condensation inside the goggles can reduce visibility. During very hot days the masks can also cause you to overheat quicker due to the lack of air getting to the head.
Unprotected players or bystanders
At most airsoft sites, any player or observer is required to keep their face mask, goggles, or shooting glasses on at all times. All players must immediately stop shooting when a person without eye protection is encountered in the playing area. One common practice is for players to shout words such as "Cease-fire, Blind Man!" Any player hearing the words must stop and repeat the alarm, alerting the whole game. If a player is hit and is wearing their death rag so that they can go to the respawn point and spawn, he will often say "Dead man walking!". This indicates to the opposing team that the person is not a threat. Even removing a mask or goggles for a brief time to clean off fog or for any other reason is not advised. If you must do this, either go to a no-fire zone or call yourself out and clean them off after leaving the combat area.
Community safety precautions
Other rules such as a maximum BB velocity and engagement distance guidelines are used by different groups. Some organizations have created common safety rules and guidelines.[8]
When not actively playing, some fields require "barrel bags," also known as barrel stoppers, which were first introduced in paintball. The magazine is usually removed as well, and the gun fired to clear the chamber. Most fields also require players to leave their guns set to the safety position when they are not shooting, a practice common when using real firearms. In certain countries, such as the Philippines, additional special rules have been adopted.[9]
All "real steel" firearms, explosives, and bladed weapons are banned at any airsoft battlefield to prevent harmful accidents or confusion between real and simulated weapons. Players are expected to be discreet in transporting their gear and uniforms so as not to alarm the public or police. Pyrotechnic devices may be allowed, but are rarely employed, because of the added danger. When they are allowed there are usually legal limits on the effect of the device, e.g. amount of smoke, volume of sound or brightness of flash.
Legal issues
Airsoft guns and playing airsoft is legal in most parts of the world. Some countries have specific restrictions [10] such as maximum muzzle velocity and 'unrealistic' coloring to distinguish them from actual firearms. They are legal throughout the U.S, but restrictions exist in certain cities such as Camden, Newark, NJ, Chicago, IL, Detroit, MI, and Colorado Springs, CO. The states of New Jersey and Michigan, however, do not allow airsoft guns to be used and handled publicly, because of the resemblance to real firearms. Federal law categorizes airsoft guns as toys and for importation into the United States the muzzle must be painted safety orange.
In the United Kingdom, airsoft replicas are classified as realistic imitation firearms or RIFs. The sale, manufacture or importation of RIFs are restricted to activities that are exempted or have been granted a defense by the Home Office under the Violent Criminal Reduction Act. Airsoft has been granted a defense, and a skirmisher as defined under British law is allowed to purchase, manufacture or import airsoft replicas. Usually, the only accepted method of proving entitlement is to be a member of a site that holds public liability insurance. A scheme set up by UK retailers, called UKARA, recommends that an airsoft site only give membership to a player who has played at least three games over a period of no less than two months. It is also possible to purchase Airsoft replicas with a Reenactors license.[citation needed] The right to buy a RIF is still reserved to over 18's.[11] Many retailers will only sell airsoft replicas to UKARA registered players. Other schemes have been set up to allow Airsoft players to comply with the Violent Crime Reduction Act 2006 such as the The Assosciation of British Airsoft (AOBA)[12] Also, the use or possession of any kind of replica weapon, loaded or otherwise in a public place is an offense under UK law and can carry heavy penalties.[13]
Some airsoft players inform local police where and when airsoft games will take place, so that misunderstandings can be avoided.
Due to a steady entry of lower-cost airsoft guns from abroad, the Philippine National Police issued in December 2007 its Circular 11 (Airsoft Implementing Rules and Regulations),[14] regulating the ownership of airsoft guns by Filipino citizens. Only airsoft guns with a muzzle velocity of 550 feet (170 m) per second (ft/s) or less using 0.2-g BBs can be registered. The PNP AIRR also regulates the operation of airsoft playing fields, teams, and the standardized rules and codes of conduct among airsoft players.
Orange-tipped airsoft gun muzzles
American federal laws require minimum 6 mm (approx. 1/4") orange tips to be present on all "toy guns" (including airsoft replicas) transported within and imported into the United States.[15]
However, these orange tips can be easily covered or painted over. One prominent case occurred in Longwood, Florida when a student threatened fellow classmates with an airsoft pistol and was subsequently shot dead when he aimed it towards an officer. The orange tip mandated by US Federal law had been painted black.[16] Airsoft players may paint over the orange tip on their guns because it makes them more discrete at a distance when they play. According to the New Times Broward-Palm Beach,[17] However, despite the lack of federal penalties for consumers who remove the required orange tips, some states (such as California) have enacted state legislation that does impose criminal penalties for the removal of any required markings.[18]
Airsoft guns
The guns used in airsoft are typically replicas of real firearms, except that they have a mechanism for pushing out projectiles 6 mm or 8 mm in diameter.
Airsoft guns are classified according to their operating principle which can be spring, electric, or gas-powered. An airsoft gun is selected according to the level of performance (battery life, range, rate of fire, accuracy, reliability, customization, magazine capacity, size, and weight) or realism the player requires. Early-generation airsoft guns were mostly "springers." Single action airsoft guns fire only a single bb before having to be manually re-cocked for the next shot. Second-generation airsoft guns had gas-powered mechanisms that required either an internal "Flon" (CFC) gas reservoir or an external high-pressure CO2 chamber. AEGs (Automatic Electric Guns) are now the most commonly used. AEGs have high-capacity rechargeable batteries used to operate gearboxes that displace air and propel the BBs. However, gas powered long guns are becoming increasingly popular, as the increased realism of these guns are now more accessible due to their increasing quality.
Most airsoft pistols which are gas-powered use environmentally safe "green gas". Green gas is propane gas with small amounts of perfume and silicon lubricant that produces a realistic blowback recoil effect when fired. Recently Airsoft manufacturers have begun producing propane adapters that screw directly onto camping grade propane tanks, allowing players to power their gas guns on pure propane, as a cheaper alternative to "green gas". Each pistol magazine contains a small storage gas cylinder with enough power to propel the 30+ BB projectiles also housed in the magazine. Thus a player can realistically load, fire, and unload an airsoft pistol in a similar manner as compared to a "real steel" semi-automatic pistol. A few early-production AEPs (Airsoft Electric Pistols) have been released but these suffer from weaker BB velocities because of the difficulty of fitting a small-enough motor in the housing of a pistol, although the range is sometimes greater than a gas pistol. AEP's often have a higher rate of fire than their gas counterparts.
Most early airsoft guns were completely made of ABS plastic except for some internal moving parts. Newer guns, especially those made in Taiwan and China, have metal internal and external parts. Japan has specific rules about producing airsoft replicas with metal parts. A typical airsoft gun is noticeably lighter than its "real steel" counterpart due to the use of aluminium, alloy, and plastic, though some have weights in them for a more realistic feel. Smoke caps are available for certain airsoft guns to add realism.
Gas hand gun magazines are usually 10-20 in a standard capacity magazine, however some are hi cap magazines which have a winder and can hold 50 rounds or more. In the case of AEG rifles magazines come in either real-capacity (equivalent to the capacity of its real steel counterpart), low-capacity (low caps: 30-80 BBs), mid-capacity (mid caps: 80-150 BBs), or high-capacity (high caps: 200-500+ BBs). These magazines are spring loaded; the high-cap magazines often have a ratchet wheel that can be wound up periodically to force BBs up from the holding chamber of the magazine to the feed chute, due to loose BBs in the reservoir they often make a rattling noise when running or walking. Some airsoft guns have an electric-powered box or drum magazines that hold thousands of BBs (up to 5000).
Grenades and launchers
Players can use grenades, grenade launchers, smoke grenades, mines, and replica claymores that use little or no explosives (pyrotechnics). Most of these "pyro" devices are powered by compressed gas. Like many aspects of airsoft, each item is designed as a playful analogy to the real thing, and often lacks the violence of such. Hand grenades are not as common as grenade launchers which launch a large shower of pellets, NERF or foam slug rounds using compressed gas. Some players purchase heavier support weapons such as replicas of the Heckler & Koch 69 40mm grenade launcher, or a replica of the Milkor MGL, which can hold up to 6 40mm gas powered pellet grenades (some grenades are able to fire over 300 pellets in a single shot), and shoot them in a semi-automatic mode. Some mines only produce a mushroom cloud when activated without actually firing any pellets. The airsoft claymore mine is more expensive (around $150) but popular. Anti-tank weapons exist, but they are not common due to their weight and greater expense. Another type of launcher that is often home made is the Works Cannon or the Dry Ice Cannon. These are often used shooting Nerf rockets as grenades.
Airsoft projectiles
Most airsoft guns fire spherical plastic pellets ranging from 0.12 to 0.88 grams in weight, though the most popular weights for AEGs are between .20 and .28 grams. Heavier rounds (.30-.48 grams) are typically used for long range and sniper use, as they are more stable in flight and less easily deflected by wind, so are more accurate. They usually come in packages of: 500, 1000, 2000, 5000 and even as high as 30000.
To increase range most airsoft weapons are fitted with 'hop-up' systems which cause BBs to fly level, and straighter for a longer period. The hop-up effect is caused by back spin on the BB, which minimizes the drop experienced by the BB, and increases the flying distance, by increasing its lift according to the Bernoulli principle.
Pellets are typically 6 mm in diameter, though 8 mm varieties exist for specialty guns and there are RARE 10mm too. Pellet quality is important, as malformed ones can damage the Airsofts guns parts. Malformed, soiled, or low-grade pellets with seams can also be much more inaccurate - even a small deformity will throw the pellet off course.
Paintball pellets are also available for airsoft guns but are unpopular due to the incompatibility with hop up systems as well as the damage they can cause when a pellet bursts inside a gun. Paintball rounds allow hits to be objectively verified, these pellets leave a clear paint mark on the player showing that they have indeed been hit.
Most airsoft pellets are made of plastic but biodegradable airsoft pellets are also available. Commercial fields usually only allow [citation needed]biodegradable pellets to avoid the buildup of plastic pellets littered across their field, it also has less of an impact on the environment because regular pellets take too long to break down when biodegradable pellets only take from four months to two years depending on the conditions and brand.
Clothing
Some players, especially those participating in MilSims, wear military clothing consisting of various forms of camouflage. Some players will go as far as to use a ghillie suit, which breaks up the human outline by having sticks, leaves, and similar items in the fabric/netting, as well as its own camouflage leafing material all over it. Aside from the advantage of camouflage, some participants aim to faithfully replicate a specific combat unit such as the SAS, Spetsnaz, or police, particularly in games such as MilSim.
In some countries, such as the Philippines, airsofters are not legally able to wear official uniforms. In Sweden, for example, it is illegal to wear both rank insignia and Swedish flags on civilian uniforms at the same time. It has become popular among civilians and airsoft players to wear only the upper garment or the pants, but not both.
When not wearing full paintball-type face masks, many players wear neck armor such as a balaclava, scarves and Shemaghs, and military-style helmets. Players generally wear combat or hiking boots (not just ordinary athletic shoes) for safety in harsh terrain. They also wear padded gloves, elbow pads, knee pads (not to protect the body from pain of getting hit by pellets, but to prevent pain and injury from performing physical actions, such as crawling and kneeling) and protective vests for additional protection, realism, and for conventional reasons such as holding magazines of ammo.
In some cases, rules are adopted that allow only casual clothes in an effort to encourage realism because players will more actively avoid being hit.
Tactical Equipment
Players wear tactical clothing and accessories for the added realism and for the practical needs similar to that of a real soldier. The most common are holsters for side arms, load bearing vests, and modular rigs. Many players also use a hydration system. Equipment for real world soldiers is also often used in airsoft games, such as reflex sights, red-dot scopes, flashlights, picatinny rails, weaver rails, and mock silencers. Mock silencers are mainly used for barrel extension, as it is illegal in the U.S. for a mock silencer to have any sound suppressing capabilities.
Many Mil-Sim players choose to wear real equipment (not an airsoft replica) and in some cases, real ballistic protective armor - this can raise the price of the game considerably.
See also
- Air gun
- Airsoft guns
- Airsoft pellets
- BB gun
- Classic airsoft
- Japan Arms Collection
- Lasertag
- Legal issues in airsoft
- List of airsoft manufacturers
- Paintball
References
- ^ "Operation Irene: Operation Lion Claws Military Simulation Series".
- ^ "Socalairsoft via http://socalairsoft.com/". 2008-01-30. Retrieved 2008-02-01.
{{cite web}}
: External link in
(help); line feed character in|title=
|title=
at position 13 (help) - ^ Airsoftica.com » BB Flight Distance with Hop-Up from Airsoftica.com
- ^ Firearms Controls Consultation: FCC Response (PDF) from the United Kingdom Airsoft Sites Governing Body
- ^ airSOCOM.com Information Regarding Airsoft Kinetic Energy
- ^ ASTM F1776 standard for paintball goggles: http://www.medem.com/MedLB/article_detaillb.cfm?article_ID=ZZZD5TRRSKC&sub_cat=32
- ^ Durability Test of Mesh Masks http://www.ampair.net/e107_plugins/content/content.php?content.102
- ^ Texas Airsoft Organization
- ^ Filipino Airsoft Players (FAP) Standard Rules and Regulations: http://www.filairsoft.com/forum/showthread.php?t=821
- ^ Complete list of Airsoft legal requirements in the world
- ^ "UKARA Q&A". Retrieved 2008-03-13.
- ^ [1]
- ^ BASC - Airguns and Replicas
- ^ Philippine National Police Circular 2007-011 (Airsoft Implementing Rules and Regulations): http://www.uaaph.com/index.php?option=com_content&task=view&id=142&Itemid=1
- ^ "Electronic Code Of Federal Regulations, Title 15: Commerce and Foreign Trade, PART 1150—MARKING OF TOY, LOOK-ALIKE AND IMITATION FIREARMS". Government Accountability Office via http://ecfr.gpoaccess.gov. 2008-01-30. Retrieved 2008-02-01.
{{cite web}}
: External link in
(help)|publisher=
- ^ Ramsey Al-Rikabi (2006-03-19). "The real problem with fake guns". Times Herald-Record. Retrieved 2008-02-01.
- ^ "Federal regulations state that fake guns must be sold with orange tips". New Times Broward-Palm Beach. 2008-09-11.
- ^ Cal. Pen. Code §§12553 http://www.leginfo.ca.gov/cgi-bin/waisgate?WAISdocID=6241702755+13+0+0&WAISaction=retrieve