9mm Japanese revolver
Appearance
(Redirected from 9×22mmR)
This article relies largely or entirely on a single source. (March 2021) |
9×22mmR Type 26 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Revolver | |||||||||||
Place of origin | Japan | |||||||||||
Service history | ||||||||||||
In service | 1893–1945 | |||||||||||
Used by | Japan | |||||||||||
Wars | Russo-Japanese War World War I Second Sino-Japanese War World War II | |||||||||||
Production history | ||||||||||||
Designed | 1893 | |||||||||||
Specifications | ||||||||||||
Case type | Rimmed, tapered | |||||||||||
Bullet diameter | 9.04 mm (0.356 in) | |||||||||||
Neck diameter | 9.47 mm (0.373 in) | |||||||||||
Base diameter | 9.83 mm (0.387 in) | |||||||||||
Rim diameter | 11.05 mm (0.435 in) | |||||||||||
Rim thickness | 0.75 mm (0.030 in) | |||||||||||
Case length | 21.89 mm (0.862 in) | |||||||||||
Overall length | 29.99 mm (1.181 in) | |||||||||||
Primer type | Small pistol | |||||||||||
Ballistic performance | ||||||||||||
|
The 9mm Japanese revolver, also known as the 9×22mmR Type 26, was a cartridge similar to the .38 S&W. These cartridges are not interchangeable. The rim diameter is thinner and the chamber pressure is lower than most .38 S&W loads.[1] The cartridge saw service with the Type 26 revolver in the Russo-Japanese War, World War I, and World War II in a limited role. The Type 26 was later replaced as the service pistol of the Imperial Japanese Army by the semi automatic Nambu pistol, which was chambered for the 8x22mm Nambu cartridge.
See also
[edit]References
[edit]- ^ "Nambu World Ammunition & Reloading Page". Archived from the original on 22 May 2011. Retrieved 9 July 2011.